The new per-cpu counter for writes_pending is initialised in
md_alloc(), which is not called by dm-raid.
So dm-raid fails when md_write_start() is called.

Move the initialization to the personality modules
that need it.  This way it is always initialised when needed,
but isn't unnecessarily initialized (requiring memory allocation)
when the personality doesn't use writes_pending.

Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>

This makes it possible, with appropriate filesystem support, for a
sysadmin to tell what is affected by the mismatch, and whether
it should be ignored (if it's inside a swap partition, for
instance).

We ratelimit to prevent log flooding: if there are so many
mismatches that ratelimiting is necessary, the individual messages
are relatively unlikely to be important (either the machine is
swapping like crazy or something is very wrong with the disk).

Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Shaohua Li <shli@fb.com>

Currently, sync of raid456 array cannot make progress when hitting
data in writeback r5cache.

This patch fixes this issue by flushing cached data of the stripe
before processing the sync request. This is achived by:

1. In handle_stripe(), do not set STRIPE_SYNCING if the stripe is
   in write back cache;
2. In r5c_try_caching_write(), handle the stripe in sync with write
   through;
3. In do_release_stripe(), make stripe in sync write out and send
   it to the state machine.

Shaohua: explictly set STRIPE_HANDLE after write out completed

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>

For the raid456 with writeback cache, when journal device failed during
normal operation, it is still possible to persist all data, as all
pending data is still in stripe cache. However, it is necessary to handle
journal failure gracefully.

During journal failures, the following logic handles the graceful shutdown
of journal:
1. raid5_error() marks the device as Faulty and schedules async work
   log->disable_writeback_work;
2. In disable_writeback_work (r5c_disable_writeback_async), the mddev is
   suspended, set to write through, and then resumed. mddev_suspend()
   flushes all cached stripes;
3. All cached stripes need to be flushed carefully to the RAID array.

This patch fixes issues within the process above:
1. In r5c_update_on_rdev_error() schedule disable_writeback_work for
   journal failures;
2. In r5c_disable_writeback_async(), wait for MD_SB_CHANGE_PENDING,
   since raid5_error() updates superblock.
3. In handle_stripe(), allow stripes with data in journal (s.injournal > 0)
   to make progress during log_failed;
4. In delay_towrite(), if log failed only process data in the cache (skip
   new writes in dev->towrite);
5. In __get_priority_stripe(), process loprio_list during journal device
   failures.
6. In raid5_remove_disk(), wait for all cached stripes are flushed before
   calling log_exit().

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>

This essentially reverts commit b5470dc5fc18 ("md: resolve external
metadata handling deadlock in md_allow_write") with some adjustments.

Since commit 6791875e2e53 ("md: make reconfig_mutex optional for writes
to md sysfs files.") changing array_state to 'active' does not use
mddev_lock() and will not cause a deadlock with md_allow_write(). This
revert simplifies userspace tools that write to sysfs attributes like
"stripe_cache_size" or "consistency_policy" because it removes the need
for special handling for external metadata arrays, checking for EAGAIN
and retrying the write.

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>

On mainline, there is no functional difference, just less code, and
symmetric lock/unlock paths.

On PREEMPT_RT builds, this fixes the following warning, seen by
Alexander GQ Gerasiov, due to the sleeping nature of spinlocks.

   BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:993
   in_atomic(): 0, irqs_disabled(): 1, pid: 58, name: kworker/u12:1
   CPU: 5 PID: 58 Comm: kworker/u12:1 Tainted: G        W       4.9.20-rt16-stand6-686 #1
   Hardware name: Supermicro SYS-5027R-WRF/X9SRW-F, BIOS 3.2a 10/28/2015
   Workqueue: writeback wb_workfn (flush-253:0)
   Call Trace:
    dump_stack+0x47/0x68
    ? migrate_enable+0x4a/0xf0
    ___might_sleep+0x101/0x180
    rt_spin_lock+0x17/0x40
    add_stripe_bio+0x4e3/0x6c0 [raid456]
    ? preempt_count_add+0x42/0xb0
    raid5_make_request+0x737/0xdd0 [raid456]

Reported-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Tested-by: Alexander GQ Gerasiov <gq@redlab-i.ru>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: Shaohua Li <shli@fb.com>

We can clear 'WantReplacement' flag directly no
matter it's replacement existed or not since the
semantic is same as before.

Also since the disk is removed from array, then
it is straightforward to remove 'WantReplacement'
flag and the comments in raid10/5 can be removed
as well.

Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>

chunk_aligned_read() currently uses fs_bio_set - which is meant for
filesystems to use - and loops if multiple splits are needed, which is
not best practice.
As this is only used for READ requests, not writes, it is unlikely
to cause a problem.  However it is best to be consistent in how
we split bios, and to follow the pattern used in raid1/raid10.

So create a private bioset, bio_split, and use it to perform a single
split, submitting the remainder to generic_make_request() for later
processing.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>

In case of read-modify-write, partial partity is the same as the result
of ops_run_prexor5(), so we can just copy sh->dev[pd_idx].page into
sh->ppl_page instead of calculating it again.

Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>