The size of struct dm_name_list is different on 32-bit and 64-bit
kernels (so "(nl + 1)" differs between 32-bit and 64-bit kernels).

This mismatch caused some harmless difference in padding when using 32-bit
or 64-bit kernel. Commit 23d70c5e52dd ("dm ioctl: report event number in
DM_LIST_DEVICES") added reporting event number in the output of
DM_LIST_DEVICES_CMD. This difference in padding makes it impossible for
userspace to determine the location of the event number (the location
would be different when running on 32-bit and 64-bit kernels).

Fix the padding by using offsetof(struct dm_name_list, name) instead of
sizeof(struct dm_name_list) to determine the location of entries.

Also, the ioctl version number is incremented to 37 so that userspace
can use the version number to determine that the event number is present
and correctly located.

In addition, a global event is now raised when a DM device is created,
removed, renamed or when table is swapped, so that the user can monitor
for device changes.

Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Fixes: 23d70c5e52dd ("dm ioctl: report event number in DM_LIST_DEVICES")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull device mapper updates from Mike Snitzer:

 - Some request-based DM core and DM multipath fixes and cleanups

 - Constify a few variables in DM core and DM integrity

 - Add bufio optimization and checksum failure accounting to DM
   integrity

 - Fix DM integrity to avoid checking integrity of failed reads

 - Fix DM integrity to use init_completion

 - A couple DM log-writes target fixes

 - Simplify DAX flushing by eliminating the unnecessary flush
   abstraction that was stood up for DM's use.

* tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dax: remove the pmem_dax_ops->flush abstraction
  dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK
  dm integrity: make blk_integrity_profile structure const
  dm integrity: do not check integrity for failed read operations
  dm log writes: fix >512b sectorsize support
  dm log writes: don't use all the cpu while waiting to log blocks
  dm ioctl: constify ioctl lookup table
  dm: constify argument arrays
  dm integrity: count and display checksum failures
  dm integrity: optimize writing dm-bufio buffers that are partially changed
  dm rq: do not update rq partially in each ending bio
  dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior
  dm mpath: complain about unsupported __multipath_map_bio() return values
  dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through

Commit abebfbe2f731 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.

It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().

It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.

Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.

Fixes: abebfbe2f731 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull block layer updates from Jens Axboe:
 "This is the first pull request for 4.14, containing most of the code
  changes. It's a quiet series this round, which I think we needed after
  the churn of the last few series. This contains:

   - Fix for a registration race in loop, from Anton Volkov.

   - Overflow complaint fix from Arnd for DAC960.

   - Series of drbd changes from the usual suspects.

   - Conversion of the stec/skd driver to blk-mq. From Bart.

   - A few BFQ improvements/fixes from Paolo.

   - CFQ improvement from Ritesh, allowing idling for group idle.

   - A few fixes found by Dan's smatch, courtesy of Dan.

   - A warning fixup for a race between changing the IO scheduler and
     device remova. From David Jeffery.

   - A few nbd fixes from Josef.

   - Support for cgroup info in blktrace, from Shaohua.

   - Also from Shaohua, new features in the null_blk driver to allow it
     to actually hold data, among other things.

   - Various corner cases and error handling fixes from Weiping Zhang.

   - Improvements to the IO stats tracking for blk-mq from me. Can
     drastically improve performance for fast devices and/or big
     machines.

   - Series from Christoph removing bi_bdev as being needed for IO
     submission, in preparation for nvme multipathing code.

   - Series from Bart, including various cleanups and fixes for switch
     fall through case complaints"

* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
  kernfs: checking for IS_ERR() instead of NULL
  drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
  drbd: Fix allyesconfig build, fix recent commit
  drbd: switch from kmalloc() to kmalloc_array()
  drbd: abort drbd_start_resync if there is no connection
  drbd: move global variables to drbd namespace and make some static
  drbd: rename "usermode_helper" to "drbd_usermode_helper"
  drbd: fix race between handshake and admin disconnect/down
  drbd: fix potential deadlock when trying to detach during handshake
  drbd: A single dot should be put into a sequence.
  drbd: fix rmmod cleanup, remove _all_ debugfs entries
  drbd: Use setup_timer() instead of init_timer() to simplify the code.
  drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
  drbd: new disk-option disable-write-same
  drbd: Fix resource role for newly created resources in events2
  drbd: mark symbols static where possible
  drbd: Send P_NEG_ACK upon write error in protocol != C
  drbd: add explicit plugging when submitting batches
  drbd: change list_for_each_safe to while(list_first_entry_or_null)
  drbd: introduce drbd_recv_header_maybe_unplug
  ...

Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.

Fixes: 71a16736a15e ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Detected by sparse.

Fixes: 4e4cbee93d56 ("block: switch bios to blk_status_t")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

No functional change in this patch, just in preparation for
basing the inflight mechanism on the queue in question.

Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull more block updates from Jens Axboe:
 "This is a followup for block changes, that didn't make the initial
  pull request. It's a bit of a mixed bag, this contains:

   - A followup pull request from Sagi for NVMe. Outside of fixups for
     NVMe, it also includes a series for ensuring that we properly
     quiesce hardware queues when browsing live tags.

   - Set of integrity fixes from Dmitry (mostly), fixing various issues
     for folks using DIF/DIX.

   - Fix for a bug introduced in cciss, with the req init changes. From
     Christoph.

   - Fix for a bug in BFQ, from Paolo.

   - Two followup fixes for lightnvm/pblk from Javier.

   - Depth fix from Ming for blk-mq-sched.

   - Also from Ming, performance fix for mtip32xx that was introduced
     with the dynamic initialization of commands"

* 'for-linus' of git://git.kernel.dk/linux-block: (44 commits)
  block: call bio_uninit in bio_endio
  nvmet: avoid unneeded assignment of submit_bio return value
  nvme-pci: add module parameter for io queue depth
  nvme-pci: compile warnings in nvme_alloc_host_mem()
  nvmet_fc: Accept variable pad lengths on Create Association LS
  nvme_fc/nvmet_fc: revise Create Association descriptor length
  lightnvm: pblk: remove unnecessary checks
  lightnvm: pblk: control I/O flow also on tear down
  cciss: initialize struct scsi_req
  null_blk: fix error flow for shared tags during module_init
  block: Fix __blkdev_issue_zeroout loop
  nvme-rdma: unconditionally recycle the request mr
  nvme: split nvme_uninit_ctrl into stop and uninit
  virtio_blk: quiesce/unquiesce live IO when entering PM states
  mtip32xx: quiesce request queues to make sure no submissions are inflight
  nbd: quiesce request queues to make sure no submissions are inflight
  nvme: kick requeue list when requeueing a request instead of when starting the queues
  nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues
  nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues
  ...

Pull libnvdimm updates from Dan Williams:
 "libnvdimm updates for the latest ACPI and UEFI specifications. This
  pull request also includes new 'struct dax_operations' enabling to
  undo the abuse of copy_user_nocache() for copy operations to pmem.

  The dax work originally missed 4.12 to address concerns raised by Al.

  Summary:

   - Introduce the _flushcache() family of memory copy helpers and use
     them for persistent memory write operations on x86. The
     _flushcache() semantic indicates that the cache is either bypassed
     for the copy operation (movnt) or any lines dirtied by the copy
     operation are written back (clwb, clflushopt, or clflush).

   - Extend dax_operations with ->copy_from_iter() and ->flush()
     operations. These operations and other infrastructure updates allow
     all persistent memory specific dax functionality to be pushed into
     libnvdimm and the pmem driver directly. It also allows dax-specific
     sysfs attributes to be linked to a host device, for example:
     /sys/block/pmem0/dax/write_cache

   - Add support for the new NVDIMM platform/firmware mechanisms
     introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
     namespace label format, extensions to the address-range-scrub
     command set, new error injection commands, and a new BTT
     (block-translation-table) layout. These updates support inter-OS
     and pre-OS compatibility.

   - Fix a longstanding memory corruption bug in nfit_test.

   - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
     capable.

   - Miscellaneous fixes and small updates across libnvdimm and the nfit
     driver.

  Acknowledgements that came after the branch was pushed: commit
  6aa734a2f38e ("libnvdimm, region, pmem: fix 'badblocks'
  sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
  <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
  libnvdimm, namespace: record 'lbasize' for pmem namespaces
  acpi/nfit: Issue Start ARS to retrieve existing records
  libnvdimm: New ACPI 6.2 DSM functions
  acpi, nfit: Show bus_dsm_mask in sysfs
  libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
  acpi, nfit: Enable DSM pass thru for root functions.
  libnvdimm: passthru functions clear to send
  libnvdimm, btt: convert some info messages to warn/err
  libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
  libnvdimm: fix the clear-error check in nsio_rw_bytes
  libnvdimm, btt: fix btt_rw_page not returning errors
  acpi, nfit: quiet invalid block-aperture-region warnings
  libnvdimm, btt: BTT updates for UEFI 2.7 format
  acpi, nfit: constify *_attribute_group
  libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
  libnvdimm, pmem, dax: export a cache control attribute
  dax: convert to bitmask for flags
  dax: remove default copy_from_iter fallback
  libnvdimm, nfit: enable support for volatile ranges
  libnvdimm, pmem: fix persistence warning
  ...