linux.git/drivers/md/dm-table.c, branch v4.4

block: Inline blk_integrity in struct gendisk

2015-10-21T20:42:42+00:00

Up until now the_integrity profile has been dynamically allocated and
attached to struct gendisk after the disk has been made active.

This causes problems because NVMe devices need to register the profile
prior to the partition table being read due to a mandatory metadata
buffer requirement. In addition, DM goes through hoops to deal with
preallocating, but not initializing integrity profiles.

Since the integrity profile is small (4 bytes + a pointer), Christoph
suggested moving it to struct gendisk proper. This requires several
changes:

 - Moving the blk_integrity definition to genhd.h.

 - Inlining blk_integrity in struct gendisk.

 - Removing the dynamic allocation code.

 - Adding helper functions which allow gendisk to set up and tear down
   the integrity sysfs dir when a disk is added/deleted.

 - Adding a blk_integrity_revalidate() callback for updating the stable
   pages bdi setting.

 - The calls that depend on whether a device has an integrity profile or
   not now key off of the bi->profile pointer.

 - Simplifying the integrity support routines in DM (Mike Snitzer).

Signed-off-by: Martin K. Petersen 
Reported-by: Christoph Hellwig 
Reviewed-by: Sagi Grimberg 
Signed-off-by: Mike Snitzer 
Cc: Dan Williams 
Signed-off-by: Dan Williams 
Signed-off-by: Jens Axboe

block: Replace SG_GAPS with new queue limits mask

2015-08-19T21:26:02+00:00

The SG_GAPS queue flag caused checks for bio vector alignment against
PAGE_SIZE, but the device may have different constraints. This patch
adds a queue limits so a driver with such constraints can set to allow
requests that would have been unnecessarily split. The new gaps check
takes the request_queue as a parameter to simplify the logic around
invoking this function.

This new limit makes the queue flag redundant, so removing it and
all usage. Device-mappers will inherit the correct settings through
blk_stack_limits().

Signed-off-by: Keith Busch 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block: kill merge_bvec_fn() completely

2015-08-13T18:31:57+00:00

As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.

Cc: Jens Axboe 
Cc: Lars Ellenberg 
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina 
Cc: Yehuda Sadeh 
Cc: Sage Weil 
Cc: Alex Elder 
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon 
Cc: Mike Snitzer 
Cc: dm-devel@redhat.com
Cc: Neil Brown 
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig 
Cc: "Martin K. Petersen" 
Acked-by: NeilBrown  (for the 'md' bits)
Acked-by: Mike Snitzer 
Signed-off-by: Kent Overstreet 
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
 dm-era-target, and resolve merge conflicts]
Signed-off-by: Dongsu Park 
Signed-off-by: Ming Lin 
Signed-off-by: Jens Axboe

Revert "block, dm: don't copy bios for request clones"

2015-06-26T14:11:58+00:00

This reverts commit 5f1b670d0bef508a5554d92525f5f6d00d640b38.

Justification for revert as reported in this dm-devel post:
https://www.redhat.com/archives/dm-devel/2015-June/msg00160.html

this change should not be pushed to mainline yet.

Firstly, Christoph has a newer version of the patch that fixes silent
data corruption problem:
  https://www.redhat.com/archives/dm-devel/2015-May/msg00229.html

And the new version still depends on LLDDs to always complete requests
to the end when error happens, while block API doesn't enforce such a
requirement. If the assumption is ever broken, the inconsistency between
request and bio (e.g. rq->__sector and rq->bio) will cause silent data
corruption:
  https://www.redhat.com/archives/dm-devel/2015-June/msg00022.html

Reported-by: Junichi Nomura 
Signed-off-by: Mike Snitzer

Revert "dm: do not allocate any mempools for blk-mq request-based DM"

2015-06-26T14:11:07+00:00

This reverts commit cbc4e3c1350beb47beab8f34ad9be3d34a20c705.

Reported-by: Junichi Nomura 
Signed-off-by: Mike Snitzer

dm: do not allocate any mempools for blk-mq request-based DM

2015-05-29T18:18:57+00:00

Do not allocate the io_pool mempool for blk-mq request-based DM
(DM_TYPE_MQ_REQUEST_BASED) in dm_alloc_rq_mempools().

Also refine __bind_mempools() to have more precise awareness of which
mempools each type of DM device uses -- avoids mempool churn when
reloading DM tables (particularly for DM_TYPE_REQUEST_BASED).

Signed-off-by: Mike Snitzer

Merge remote-tracking branch 'jens/for-4.2/core' into dm-4.2

2015-05-29T18:17:16+00:00

dm: fix reload failure of 0 path multipath mapping on blk-mq devices

2015-05-29T17:41:16+00:00

dm-multipath accepts 0 path mapping.

  # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev

Such a mapping can be used to release underlying devices while still
holding requests in its queue until working paths come back.

However, once the multipath device is created over blk-mq devices,
it rejects reloading of 0 path mapping:

  # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \
      | dmsetup create mpath1
  # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1
  device-mapper: reload ioctl on mpath1 failed: Invalid argument
  Command failed

With following kernel message:
  device-mapper: ioctl: can't change device type after initial table load.

DM tries to inherit the current table type using dm_table_set_type()
but it doesn't work as expected because of unnecessary check about
whether the target type is hybrid or not.

Hybrid type is for targets that work as either request-based or bio-based
and not required for blk-mq or non blk-mq checking.

Fixes: 65803c205983 ("dm table: train hybrid target type detection to select blk-mq if appropriate")
Signed-off-by: Jun'ichi Nomura 
Signed-off-by: Mike Snitzer

block, dm: don't copy bios for request clones

2015-05-22T14:58:57+00:00

Currently dm-multipath has to clone the bios for every request sent
to the lower devices, which wastes cpu cycles and ties down memory.

This patch instead adds a new REQ_CLONE flag that instructs req_bio_endio
to not complete bios attached to a request, which we set on clone
requests similar to bios in a flush sequence.  With this change I/O
errors on a path failure only get propagated to dm-multipath, which
can then either resubmit the I/O or complete the bios on the original
request.

I've done some basic testing of this on a Linux target with ALUA support,
and it survives path failures during I/O nicely.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Mike Snitzer 
Signed-off-by: Jens Axboe

dm table: use bool function return values of true/false not 1/0

2015-04-15T16:10:23+00:00

Use the normal return values for bool functions.

Signed-off-by: Joe Perches 
Signed-off-by: Mike Snitzer