When any leg(s) have failed, any read will cause a new operational
default leg to be selected and the read is resubmitted to it.  If that
new default leg fails the read too, no other still accessible legs are
used to resubmit the read again -- thus failing the io.

Fix by allowing the read to get resubmitted until all operational legs
have been exhausted.  Also, remove any details.bi_dev use as a flag.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

If a default leg has failed, any read will cause a new operational
default leg to be selected and the read is resubmitted.  But until now
the read will return failure even though it was successful due to
resubmission.  The reason for this is bio->bi_error was not being
cleared before resubmitting the bio.

Fix by clearing bio->bi_error before resubmission.

Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>

These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces.  For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense.  Any check for READA is replaced with an
explicit check for REQ_RAHEAD.  Also remove the READA alias for
REQ_RAHEAD.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Separate the op from the rq_flag_bits and have dm
set/get the bio using bio_set_op_attrs/bio_op.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Request-based DM will also make use of per_bio_data_size.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull device mapper update from Mike Snitzer:

 - a couple small cleanups in dm-cache, dm-verity, persistent-data's
   dm-btree, and DM core.

 - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio
   prison cells

 - a 4.2-stable fix that adds feature reporting for the dm-stats
   features added in 4.2

 - improve DM-snapshot to not invalidate the on-disk snapshot if
   snapshot device write overflow occurs; but a write overflow triggered
   through the origin device will still invalidate the snapshot.

 - optimize DM-thinp's async discard submission a bit now that late bio
   splitting has been included in block core.

 - switch DM-cache's SMQ policy lock from using a mutex to a spinlock;
   improves performance on very low latency devices (eg. NVMe SSD).

 - document DM RAID 4/5/6's discard support

[ I did not pull the slab changes, which weren't appropriate for this
  tree, and weren't obviously the right thing to do anyway.  At the very
  least they need some discussion and explanation before getting merged.

  Because not pulling the actual tagged commit but doing a partial pull
  instead, this merge commit thus also obviously is missing the git
  signature from the original tag ]

* tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix use after freeing migrations
  dm cache: small cleanups related to deferred prison cell cleanup
  dm cache: fix leaking of deferred bio prison cells
  dm raid: document RAID 4/5/6 discard support
  dm stats: report precise_timestamps and histogram in @stats_list output
  dm thin: optimize async discard submission
  dm snapshot: don't invalidate on-disk image on snapshot write overflow
  dm: remove unlikely() before IS_ERR()
  dm: do not override error code returned from dm_get_device()
  dm: test return value for DM_MAPIO_SUBMITTED
  dm verity: remove unused mempool
  dm cache: move wake_waker() from free_migrations() to where it is needed
  dm btree remove: remove unused function get_nr_entries()
  dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling()
  dm cache policy smq: change the mutex to a spinlock

Some of the device mapper targets override the error code returned by
dm_get_device() and return either -EINVAL or -ENXIO.  There is nothing
gained by this override.  It is better to propagate the returned error
code unchanged to caller.

This work was motivated by hitting an issue where the underlying device
was busy but -EINVAL was being returned.  After this change we get
-EBUSY instead and it is easier to figure out the problem.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>