linux.git/drivers/md/dm-raid.c, branch v4.14

Merge tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2017-10-05T22:17:40+00:00

Pull device mapper fixes from Mike Snitzer:

 - a stable fix for the alignment of the event number reported at the
   end of the 'DM_LIST_DEVICES' ioctl.

 - a couple stable fixes for the DM crypt target.

 - a DM raid health status reporting fix.

* tag 'for-4.14/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix incorrect status output at the end of a "recover" process
  dm crypt: reject sector_size feature if device length is not aligned to it
  dm crypt: fix memory leak in crypt_ctr_cipher_old()
  dm ioctl: fix alignment of event number in the device list

dm raid: fix incorrect status output at the end of a "recover" process

2017-10-05T20:21:30+00:00

There are three important fields that indicate the overall health and
status of an array: dev_health, sync_ratio, and sync_action.  They tell
us the condition of the devices in the array, and the degree to which
the array is synchronized.

This commit fixes a condition that is reported incorrectly.  When a member
of the array is being rebuilt or a new device is added, the "recover"
process is used to synchronize it with the rest of the array.  When the
process is complete, but the sync thread hasn't yet been reaped, it is
possible for the state of MD to be:
 mddev->recovery = [ MD_RECOVERY_RUNNING MD_RECOVERY_RECOVER MD_RECOVERY_DONE ]
 curr_resync_completed =  (but not MaxSector)
 and all rdevs to be In_sync.
This causes the 'array_in_sync' output parameter that is passed to
rs_get_progress() to be computed incorrectly and reported as 'false' --
or not in-sync.  This in turn causes the dev_health status characters to
be reported as all 'a', rather than the proper 'A'.

This can cause erroneous output for several seconds at a time when tools
will want to be checking the condition due to events that are raised at
the end of a sync process.  Fix this by properly calculating the
'array_in_sync' return parameter in rs_get_progress().

Also, remove an unnecessary intermediate 'recovery_cp' variable in
rs_get_progress().

Signed-off-by: Jonathan Brassow 
Signed-off-by: Mike Snitzer

dm-raid: fix a race condition in request handling

2017-09-28T03:08:29+00:00

raid_map calls pers->make_request, which missed the suspend check. Fix it with
the new md_handle_request API.

Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: Heinz Mauelshagen 
Cc: Mike Snitzer 
Cc: stable@vger.kernel.org
Reviewed-by: NeilBrown 
Signed-off-by: Shaohua Li

dm raid: bump target version

2017-07-25T18:54:20+00:00

Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c
("md: fix deadlock between mddev_suspend() and md_write_start()") is
available.

This version change allows userspace to detect that MD fix is available.

Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer

dm raid: avoid mddev->suspended access

2017-07-25T18:54:19+00:00

Use runtime flag to ensure that an mddev gets suspended/resumed just once.

Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer

dm raid: fix activation check in validate_raid_redundancy()

2017-07-25T18:54:19+00:00

During growing reshapes (i.e. stripes being added to a raid set), the
new stripe images are not in-sync and not part of the raid set until
the reshape is started.

LVM2 has to request multiple table reloads involving superblock updates
in order to reflect proper size of SubLVs in the cluster.  Before a stripe
adding reshape starts, validate_raid_redundancy() fails as a result of that
because it checks the total number of devices against the number of rebuild
ones rather than the actual ones in the raid set (as retrieved from the
superblock) thus resulting in failed raid4/5/6/10 redundancy checks.

E.g. convert 3 stripes -> 7 stripes raid5 (which only allows for maximum
1 device to fail) requesting +4 delta disks causing 4 devices to rebuild
during reshaping thus failing activation.

To fix this, move validate_raid_redundancy() to get access to the
current raid_set members.

Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer

dm raid: remove WARN_ON() in raid10_md_layout_to_format()

2017-07-25T18:54:18+00:00

Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer

Merge tag 'for-4.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2017-07-06T18:54:56+00:00

Pull device mapper updates from Mike Snitzer:

 - Add the ability to use select or poll /dev/mapper/control to wait for
   events from multiple DM devices.

 - Convert DM's printk macros over to using pr_ macros.

 - Add a big-endian variant of plain64 IV to dm-crypt.

 - Add support for zoned (aka SMR) devices to DM core. DM kcopyd was
   also improved to provide a sequential write feature needed by zoned
   devices.

 - Introduce DM zoned target that provides support for host-managed
   zoned devices, the result dm-zoned device acts as a drive-managed
   interface to the underlying host-managed device.

 - A DM raid fix to avoid using BUG() for error handling.

* tag 'for-4.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm zoned: fix overflow when converting zone ID to sectors
  dm raid: stop using BUG() in __rdev_sectors()
  dm zoned: drive-managed zoned block device target
  dm kcopyd: add sequential write feature
  dm linear: add support for zoned block devices
  dm flakey: add support for zoned block devices
  dm: introduce dm_remap_zone_report()
  dm: fix REQ_OP_ZONE_REPORT bio handling
  dm: fix REQ_OP_ZONE_RESET bio handling
  dm table: add zoned block devices validation
  dm: convert DM printk macros to pr_ macros
  dm crypt: add big-endian variant of plain64 IV
  dm bio prison: use rb_entry() rather than container_of()
  dm ioctl: report event number in DM_LIST_DEVICES
  dm ioctl: add a new DM_DEV_ARM_POLL ioctl
  dm: add basic support for using the select or poll function

dm raid: stop using BUG() in __rdev_sectors()

2017-06-30T14:15:52+00:00

Return 0 rather than BUG() if __rdev_sectors() fails and catch invalid
rdev size in the constructor.

Reported-by: Hannes Reinecke 
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer

dm raid: fix oops on upgrading to extended superblock format

2017-06-23T16:16:15+00:00

When a RAID set was created on dm-raid version < 1.9.0 (old RAID
superblock format), all of the new 1.9.0 members of the superblock are
uninitialized (zero) -- including the device sectors member needed to
support shrinking.

All the other accesses to superblock fields new in 1.9.0 were reviewed
and verified to be properly guarded against invalid use.  The 'sectors'
member was the only one used when the superblock version is < 1.9.

Don't access the superblock's >= 1.9.0 'sectors' member unconditionally.
Also add respective comments.

Signed-off-by: Heinz Mauelshagen 
Signed-off-by: Mike Snitzer