Pull block updates from Jens Axboe:
 "Pretty quiet round this time around. This contains:

   - NVMe updates via Keith:
        - nvme fabrics spec updates (Guixin, Max)
        - nvme target udpates (Guixin, Evan)
        - nvme attribute refactoring (Daniel)
        - nvme-fc numa fix (Keith)

   - MD updates via Song:
        - Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
        - Fix raid5 hang issue (Junxiao Bi)
        - Add Yu Kuai as Reviewer of the md subsystem
        - Remove deprecated flavors (Song Liu)
        - raid1 read error check support (Li Nan)
        - Better handle events off-by-1 case (Alex Lyakas)

   - Efficiency improvements for passthrough (Kundan)

   - Support for mapping integrity data directly (Keith)

   - Zoned write fix (Damien)

   - rnbd fixes (Kees, Santosh, Supriti)

   - Default to a sane discard size granularity (Christoph)

   - Make the default max transfer size naming less confusing
     (Christoph)

   - Remove support for deprecated host aware zoned model (Christoph)

   - Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
     Bart, Christoph)"

* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
  block: Treat sequential write preferred zone type as invalid
  block: remove disk_clear_zoned
  sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
  drivers/block/xen-blkback/common.h: Fix spelling typo in comment
  blk-cgroup: fix rcu lockdep warning in blkg_lookup()
  blk-cgroup: don't use removal safe list iterators
  block: floor the discard granularity to the physical block size
  mtd_blkdevs: use the default discard granularity
  bcache: use the default discard granularity
  zram: use the default discard granularity
  null_blk: use the default discard granularity
  nbd: use the default discard granularity
  ubd: use the default discard granularity
  block: default the discard granularity to sector size
  bcache: discard_granularity should not be smaller than a sector
  block: remove two comments in bio_split_discard
  block: rename and document BLK_DEF_MAX_SECTORS
  loop: don't abuse BLK_DEF_MAX_SECTORS
  aoe: don't abuse BLK_DEF_MAX_SECTORS
  null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
  ...

The discard granularity now defaults to a single sector, so don't set
that value explicitly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231228075545.362768-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Just like all block I/O, discards are in units of sectors.  Thus setting a
smaller than sector size discard limit in case of > 512 byte sectors in
bcache doesn't make sense.  Always set the discard granularity to 512
bytes instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231228075545.362768-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull more bcachefs bugfixes from Kent Overstreet:

 - bcache & bcachefs were broken with CFI enabled; patch for closures to
   fix type punning

 - mark erasure coding as extra-experimental; there are incompatible
   disk space accounting changes coming for erasure coding, and I'm
   still seeing checksum errors in some tests

 - several fixes for durability-related issues (durability is a device
   specific setting where we can tell bcachefs that data on a given
   device should be counted as replicated x times)

 - a fix for a rare livelock when a btree node merge then updates a
   parent node that is almost full

 - fix a race in the device removal path, where dropping a pointer in a
   btree node to a device would be clobbered by an in flight btree write
   updating the btree node key on completion

 - fix one SRCU lock hold time warning in the btree gc code - ther's
   still a bunch more of these to fix

 - fix a rare race where we'd start copygc before initializing the "are
   we rw" percpu refcount; copygc would think we were already ro and die
   immediately

* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
  bcachefs: Extra kthread_should_stop() calls for copygc
  bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
  bcachefs: Fix race between btree writes and metadata drop
  bcachefs: move journal seq assertion
  bcachefs: -EROFS doesn't count as move_extent_start_fail
  bcachefs: trace_move_extent_start_fail() now includes errcode
  bcachefs: Fix split_race livelock
  bcachefs: Fix bucket data type for stripe buckets
  bcachefs: Add missing validation for jset_entry_data_usage
  bcachefs: Fix zstd compress workspace size
  bcachefs: bpos is misaligned on big endian
  bcachefs: Fix ec + durability calculation
  bcachefs: Data update path won't accidentaly grow replicas
  bcachefs: deallocate_extra_replicas()
  bcachefs: Proper refcounting for journal_keys
  bcachefs: preserve device path as device name
  bcachefs: Fix an endianness conversion
  bcachefs: Start gc, copygc, rebalance threads after initing writes ref
  bcachefs: Don't stop copygc thread on device resize
  bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
  ...

Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.

So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).

Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.

Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In run_cache_set() after c->root returned from bch_btree_node_get(), it
is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL
because bch_btree_node_get() will not return NULL pointer to caller.

This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.

Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are
used for dirty data writeback, their sizes are decided by backing device
capacity and stripe size. Larger backing device capacity or smaller
stripe size make these two arraies occupies more dynamic memory space.

Currently bcache->stripe_size is directly inherited from
queue->limits.io_opt of underlying storage device. For normal hard
drives, its limits.io_opt is 0, and bcache sets the corresponding
stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for
devices do declare value for queue->limits.io_opt, small stripe_size
(comparing to 1TB) becomes an issue for oversize memory allocations of
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the
capacity of hard drives gets much larger in recent decade.

For example a raid5 array assembled by three 20TB hardrives, the raid
device capacity is 40TB with typical 512KB limits.io_opt. After the math
calculation in bcache code, these two arraies will occupy 400MB dynamic
memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is
declared on a new 2TB hard drive, then these two arraies request 2GB and
512MB dynamic memory from kzalloc(). The result is that bcache device
always fails to initialize on his system.

To avoid the oversize memory allocation, bcache->stripe_size should not
directly inherited by queue->limits.io_opt from the underlying device.
This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size
and set bcache device's stripe size against the declared limits.io_opt
value from the underlying storage device,
- If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size directly by this limits.io_opt value.
- If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will
  set its stripe size by a value multiplying limits.io_opt and euqal or
  large than BCH_MIN_STRIPE_SZ.

Then the minimal stripe size of a bcache device will always be >= 4MB.
For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by
bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB
in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied
by these two arraies will be 2.5MB in total.

Such mount of memory allocated for bcache->stripe_sectors_dirty and
bcache->full_dirty_stripes is reasonable for most of storage devices.

Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net>
Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull initial bcachefs updates from Kent Overstreet:
 "Here's the bcachefs filesystem pull request.

  One new patch since last week: the exportfs constants ended up
  conflicting with other filesystems that are also getting added to the
  global enum, so switched to new constants picked by Amir.

  The only new non fs/bcachefs/ patch is the objtool patch that adds
  bcachefs functions to the list of noreturns. The patch that exports
  osq_lock() has been dropped for now, per Ingo"

* tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs: (2781 commits)
  exportfs: Change bcachefs fid_type enum to avoid conflicts
  bcachefs: Refactor memcpy into direct assignment
  bcachefs: Fix drop_alloc_keys()
  bcachefs: snapshot_create_lock
  bcachefs: Fix snapshot skiplists during snapshot deletion
  bcachefs: bch2_sb_field_get() refactoring
  bcachefs: KEY_TYPE_error now counts towards i_sectors
  bcachefs: Fix handling of unknown bkey types
  bcachefs: Switch to unsafe_memcpy() in a few places
  bcachefs: Use struct_size()
  bcachefs: Correctly initialize new buckets on device resize
  bcachefs: Fix another smatch complaint
  bcachefs: Use strsep() in split_devs()
  bcachefs: Add iops fields to bch_member
  bcachefs: Rename bch_sb_field_members -> bch_sb_field_members_v1
  bcachefs: New superblock section members_v2
  bcachefs: Add new helper to retrieve bch_member from sb
  bcachefs: bucket_lock() is now a sleepable lock
  bcachefs: fix crc32c checksum merge byte order problem
  bcachefs: Fix bch2_inode_delete_keys()
  ...

Coverity has noticed that the printing of error message in
register_cache() uses already freed bdev_handle to get to bdev. In fact
the problem has been there even before commit "bcache: Convert to
bdev_open_by_path()" just a bit more subtle one - cache object itself
could have been freed by the time we looked at ca->bdev and we don't
hold any reference to bdev either so even that could in principle go
away (due to device unplug or similar). Fix all these problems by
printing the error message before closing the bdev.

Fixes: dc893f51d24a ("bcache: Convert to bdev_open_by_path()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231004093757.11560-1-jack@suse.cz
Asked-by: Coly Li <colyli@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Convert bcache to use bdev_open_by_path() and pass the handle around.

CC: linux-bcache@vger.kernel.org
CC: Coly Li <colyli@suse.de>
CC: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-9-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>