linux.git/drivers/macintosh, branch v2.6.15

[PATCH] powerpc: more g5 overtemp problem fix

2006-01-02T16:38:37+00:00

Some G5s still occasionally experience shutdowns due to overtemp
conditions despite the recent fix. After analyzing logs from such
machines, it appears that the overtemp code is a bit too quick at
shutting the machine down when reaching the critical temperature (tmax +
8) and doesn't leave the fan enough time to actually cool it down. This
happens if the temperature of a CPU suddenly rises too high in a very
short period of time, or occasionally on boot (that is the CPUs are
already overtemp by the time the driver loads).

This patches makes the code a bit more relaxed, leaving a few seconds to
the fans to do their job before kicking the machine shutown.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds

[PATCH] powerpc: g5 thermal overtemp bug

2005-12-20T17:25:33+00:00

The g5 thermal control for liquid cooled machines has a small bug, when
the temperatures gets too high, it boosts all fans to the max, but
incorrectly sets the liquids pump to the min instead of the max speed,
thus causing the overtemp condition not to clear and the machine to shut
down after a while. This fixes it to set the pumps to max speed instead.
This problem might explain some of the reports of random shutdowns that
some g5 users have been reporting in the past.

Many thanks to Marcus Rothe for spending a lot of time trying various
patches & sending log logs before I found out that typo. Note that
overtemp handling is still not perfect and the machine might still
shutdown, that patch should reduce if not eliminate such occcurences in
"normal" conditions with high load. I'll implement a better handling
with proper slowing down of the CPUs later.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds

[PATCH] Fix windfarm model-id table

2005-12-09T04:42:17+00:00

model_id fields of wf_smu_sys_all_params should match the model ID
they are supposed to represent (as commented). Fixes windfarm on some
iMac 8,1 models.

Signed-off-by: Michal Ostrowski 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

macintosh: Always export pmu_[un]register_sleep_notifier if CONFIG_PM set

2005-11-08T01:14:50+00:00

This fixes a build error when building the pmac sound driver as a
module for 64-bit powermacs.

Signed-off-by: Paul Mackerras

[PATCH] ppc: fix a bunch of warnings

2005-11-08T00:19:36+00:00

Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings,
this fixes some of them

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] ppc64: Thermal control for SMU based machines

2005-11-08T00:17:56+00:00

This adds a new thermal control framework for PowerMac, along with the
implementation for PowerMac8,1, PowerMac8,2 (iMac G5 rev 1 and 2), and
PowerMac9,1 (latest single CPU desktop). In the future, I expect to move
the older G5 thermal control to the new framework as well.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] ppc64: SMU partition recovery

2005-11-08T00:17:40+00:00

This patch adds the ability to the SMU driver to recover missing
calibration partitions from the SMU chip itself. It also adds some
dynamic mecanism to /proc/device-tree so that new properties are visible
to userland.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] ppc64: SMU based macs cpufreq support

2005-11-08T00:17:34+00:00

CPU freq support using 970FX powertune facility for iMac G5 and SMU
based single CPU desktop.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[PATCH] kfree cleanup: misc remaining drivers

2005-11-07T15:54:05+00:00

This is the remaining misc drivers/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in misc files in
drivers/.

Signed-off-by: Jesper Juhl 
Acked-by: Aristeu Sergio Rozanski Filho 
Acked-by: Roland Dreier 
Acked-by: Pierre Ossman 
Acked-by: Jean Delvare 
Acked-by: Greg Kroah-Hartman 
Acked-by: Len Brown 
Acked-by: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] drivers/macintosh: fix-up schedule_timeout() usage

2005-11-07T15:53:57+00:00

Use schedule_timeout_interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.

Signed-off-by: Nishanth Aravamudan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds