linux.git/drivers/leds/Makefile, branch v2.6.24

[ARM] 4576/1: CM-X270 machine support

2007-10-15T17:53:57+00:00

This patch provides core support for CM-X270 platform.

Signed-off-by: Mike Rapoport 
Signed-off-by: Russell King

leds: Add Cobalt Raq series LEDs support

2007-10-11T21:24:00+00:00

Add Cobalt Raq series LEDs support.

Signed-off-by: Yoichi Yuasa 
Acked-by: Ralf Baechle 
Signed-off-by: Richard Purdie

leds: Rename leds-cobalt driver

2007-10-11T21:24:00+00:00

The leds-cobalt driver only supports the Coable Qube series
(not included in Cobalt Raq series).
Rename the driver and update Kconfig/Makefile.

Signed-off-by: Yoichi Yuasa 
Acked-by: Florian Fainelli 
Signed-off-by: Richard Purdie

leds: Add generic GPIO LED driver

2007-07-16T00:15:50+00:00

This patch adds support for GPIO connected leds via the new GPIO framework.

Information about leds (gpio, polarity, name, default trigger) is passed
to the driver via platform_data.

Signed-off-by: Raphael Assenat 
Signed-off-by: Richard Purdie

leds: Add support for Cobalt Server front LED

2007-02-15T21:37:29+00:00

Add support for Cobalt Server front LED (MIPS)

Signed-off-by: Florian Fainell 
Signed-off-by: Richard Purdie

leds: Add IPAQ h1940 LEDs support

2007-02-15T21:36:19+00:00

This patch adds the support for the IPAQ h1940 leds.

In order to create the amber led (used for the battery charging), the red and
green leds are set to the same default trigger. Due to hardware limitations,
the blue led can only be set in blinking mode.

Signed-off-by: Arnaud Patard 
Signed-off-by: Richard Purdie

[PATCH] PCEngines WRAP LED Support

2006-12-07T16:39:36+00:00

A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are
very similar to the Soekris net4801 (same NS SC1100 geode reference
design).

The LEDs on the WRAP are on different GPIO lines and I have modified and
copied the net48xx error led support for this.  It also includes support
for an "extra" led (in addition to error).  The three LEDs on the WRAP are
at GPIO lines 2,3,18 (WRAP LEDs from left to right).  This driver gives
access to the second and third LEDs by twiddling GPIO lines 3 & 18.

Because these boards are so similar to the net48xx, I basically sed-ed that
driver to form the basis for leds-wrap.c.  The only changes from
leds-net48xx.c are:

 - #define WRAP_EXTRA_LED_GPIO

 - name changes

 - duplicate relevant sections to provide support for the "extra" led

 - reverse the various *_led_set values.  The WRAP is "backwards" from the
   net48xx, and these needed to be updated for that.

[akpm@osdl.org: build fix]
Signed-off-by: Kristian Kielhofner 
Acked-by: Richard Purdie 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] LED Class support for Soekris net48xx

2006-07-10T20:24:26+00:00

Add LED Class device support for the Soekris net48xx Error LED.  Tested
only on a net4801, but should work on a net4826 as well.  I'd love to find
a way of detecting a Soekris net48xx device but there is no DMI or any
Soekris-specific PCI devices.

[akpm@osdl.org: fixlets, cleanups]
Signed-off-by: Chris Boot 
Cc: Ben Dooks 
Cc: Richard Purdie 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] LED: add LED heartbeat trigger

2006-06-25T17:01:23+00:00

Add an LED trigger acts like a heart beat.  This can be used as a
replacement of CONFIG_HEARTBEAT code exists in some arch's timer code.

Signed-off-by: Atsushi Nemoto 
Acked-by: Richard Purdie 
Cc: "Nish Aravamudan" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] leds: Amstrad Delta LED support

2006-06-23T14:43:05+00:00

Use the new LED infrastructure to support the 6 LEDs present on the Amstrad
Delta.

[akpm@osdl.org: cleanup]
Signed-off-by: Jonathan McDowell 
Ackde-by: Richard Purdie 
Cc: Ben Dooks 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds