linux.git/drivers/leds/Kconfig, branch v4.18

leds: lm3601x: Introduce the lm3601x LED driver

2018-05-23T19:44:47+00:00

Introduce the family of LED devices that can
drive a torch, strobe or IR LED.

The LED driver can be configured with a strobe
timer to execute a strobe flash.  The IR LED
brightness is controlled via the torch brightness
register.

The data sheet for each the LM36010 and LM36011
LED drivers can be found here:
http://www.ti.com/product/LM36010
http://www.ti.com/product/LM36011

Signed-off-by: Dan Murphy 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Jacek Anaszewski

leds: Add Spreadtrum SC27xx breathing light controller driver

2018-05-14T20:18:34+00:00

This patch adds Spreadtrum SC27xx PMIC series breathing light controller
driver, which can support 3 LEDs. Each LED can work at normal PWM mode
and breathing mode.

Signed-off-by: Xiaotong Lu 
Signed-off-by: Baolin Wang 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: add LED driver for CR0014114 board

2018-04-16T18:16:24+00:00

This patch adds a LED class driver for the RGB LEDs found on
the Crane Merchandising System CR0014114 LEDs board.

Signed-off-by: Oleh Kravchenko 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform

2018-02-19T20:09:20+00:00

Driver obtains LED devices according to system configuration and creates
devices in form: "devicename:color:function", like
The full path is to be:
/sys/class/leds/mlxreg\:status\:amber/brightness
After timer trigger activation:
echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger
Attributes for LED blinking will appaer in sysfs infrastructure:
/sys/class/leds/mlxreg\:status\:amber/delay_off
/sys/class/leds/mlxreg\:status\:amber/delay_on

LED setting is controlled through the on-board programmable devices,
which exports its register map. This device could be attached to any
bus type, for which register mapping is supported.

Signed-off-by: Vadim Pasternak 
Acked-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG

2018-02-15T21:03:32+00:00

It fixes grammatical errors in Kconfig file for LEDS_SYSCON,
LEDS_MLXCPLD, LEDS_MC13783, LEDS_NETXBIG.

Signed-off-by: Vadim Pasternak 
Signed-off-by: Jacek Anaszewski

leds: Clarify supported chips by LM355x driver

2018-02-12T19:49:38+00:00

Clarify which controllers are supported by which driver.

Reported-by: Andy Shevchenko 
Signed-off-by: Pavel Machek 
Signed-off-by: Jacek Anaszewski

leds: leds-mlxcpld: Allow compilation for 32 bit arch

2018-02-12T19:49:09+00:00

It makes leds-mlxcpld available for 32 bit architecture.

Signed-off-by: Vadim Pasternak 
Reported-by: Jiri Pirko 
Signed-off-by: Jacek Anaszewski

leds: lp8860: Various fixes to align with LED framework

2018-01-08T20:28:12+00:00

Update the driver to conform with the LED framework:
 - use devm_led_classdev_register
 - destroy mutex on exit
 - remove dependency on CONFIG_OF in the driver and move
   to the Kconfig
 - update the MODULE_LICENSE to GPL v2
 - remove setting of MAX brightness as the LED framework
   does this.

Signed-off-by: Dan Murphy 
Signed-off-by: Jacek Anaszewski

leds: lm3692x: Introduce LM3692x dual string driver

2018-01-08T20:28:11+00:00

Introducing the LM3692x Dual-String white LED driver.

Data sheet is located
http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf

Signed-off-by: Dan Murphy 
Signed-off-by: Jacek Anaszewski

leds: Add driver for PC Engines APU/APU2 LEDs

2017-11-06T21:05:00+00:00

This patch implements the driver to support the front panel LEDs
for PC Engines APU and APU2 boards.

Signed-off-by: Alan Mizrahi 
Signed-off-by: Jacek Anaszewski