Pull ARM SoC driver changes from Olof Johansson:
 "A handful of driver-related changes.  We've had a bunch of them going
  in through other branches as well, so it's only a part of what we
  really have this release.

  Larger pieces are:

   - Removal of a now unused PWM driver for atmel
     [ This includes AVR32 changes that have been appropriately acked ]
   - Performance counter support for the arm CCN interconnect
   - OMAP mailbox driver cleanups and consolidation
   - PCI and SATA PHY drivers for SPEAr 13xx platforms
   - Redefinition (with backwards compatibility!) of PCI DT bindings for
     Tegra to better model regulators/power"

Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit f0ed817638b5 ("phy:
core: Let node ptr of PHY point to PHY and not of PHY provider") that
came in through Greg's USB tree.

Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through
the next tree.

* tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: arm-ccn: Fix error handling at event allocation
  mailbox/omap: add a parent structure for every IP instance
  mailbox/omap: remove the private mailbox structure
  mailbox/omap: consolidate OMAP mailbox driver
  mailbox/omap: simplify the fifo assignment by using macros
  mailbox/omap: remove omap_mbox_type_t from mailbox ops
  mailbox/omap: remove OMAP1 mailbox driver
  mailbox/omap: use devm_* interfaces
  bus: ARM CCN: add PERF_EVENTS dependency
  bus: ARM CCN PMU driver
  PCI: spear: Remove spear13xx_pcie_remove()
  PCI: spear: Fix Section mismatch compilation warning for probe()
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  ...

This adds a driver for the iPAQ microcontroller LED.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

The leds-atmel-pwm driver is now obsolete. It is not used by any mainlined
boards and is replaced by the generic leds_pwm with the pwm-atmel driver using
the generic PWM framework.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Pull LED updates from Bryan Wu:
 "I just found merge window is open and I'm quite busy and almost forget
  to send out this pull request.  Thanks Russell and Alexandre ping me
  about this.

  So basically we got some clean up and leds-pwm fixing patches from
  Russell"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: Remove duplicated OOM message for individual driver
  drivers/leds: Replace __get_cpu_var use through this_cpu_ptr
  leds: lp55xx: add DT bindings for LP55231
  leds: 88pm860x: Fix missing refcount decrement for parent of_node
  leds: 88pm860x: Use of_get_child_by_name
  leds: leds-pwm: add DT support for LEDs wired to supply
  leds: leds-pwm: implement PWM inversion
  leds: leds-pwm: convert OF parsing code to use led_pwm_add()
  leds: leds-pwm: provide a common function to setup a single led-pwm device
  leds: pca9685: Remove leds-pca9685 driver
  dell-led: add mic mute led interface

Pull HID patches from Jiri Kosina:
 - RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew
   Duggan and Jiri Kosina
 - cleanup of hid-sony driver and improved support for Sixaxis and
   Dualshock 4, by Frank Praznik
 - other usual small fixes and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
  HID: thingm: thingm_fwinfo[] doesn't need to be global
  HID: core: add two new usages for digitizer
  HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
  HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
  HID: hid-sensor-hub: Set report quirk for Microsoft Surface
  HID: debug: add labels for HID Sensor Usages
  HID: uhid: Use kmemdup instead of kmalloc + memcpy
  HID: rmi: do not handle touchscreens through hid-rmi
  HID: quirk for Saitek RAT7 and MMO7 mices' mode button
  HID: core: fix validation of report id 0
  HID: rmi: fix masks for x and w_x data
  HID: rmi: fix wrong struct field name
  HID: rmi: do not fetch more than 16 bytes in a query
  HID: rmi: check for the existence of some optional queries before reading query 12
  HID: i2c-hid: hid report descriptor retrieval changes
  HID: add missing hid usages
  HID: hid-sony - allow 3rd party INTEC controller to turn off all leds
  HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs
  HID: sony: Initialize the controller LEDs with a device ID value
  HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string
  ...

I got a build error today, since LEDS_VERSATILE can be built-in while LEDS_CLASS
is a module:

drivers/built-in.o: In function `versatile_leds_probe':
:(.text+0x155020): undefined reference to `led_classdev_register'

I suggest we turn this option into 'tristate' so that the dependency
tracking works correctly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This driver is replaced by pwm-pca9685 driver and there is no user uses this
driver in current tree. So remove it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Acked-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

Merge Kconfig cleanups from Rob Herring:

Several mach kconfig clean-ups of redundant selects

* tag 'kconfig-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  ARM: qcom: clean-up unneeded kconfig selects
  ARM: bcm: clean-up unneeded kconfig selects
  ARM: mvebu: clean-up unneeded kconfig selects
  + Linux 3.15-rc2

Signed-off-by: Olof Johansson <olof@lixom.net>

This patch refactors the way the thingm driver registers a blink(1) LED.
In order to make the driver simpler and more standard, drop the "rgb"
sysfs attribute and create one instance of LED class per RGB channel.

Actually, the name of the LED class instance registered for a blink(1)
device is "blink1::ABCD", where ABCD is the last 4 chars of the serial
number. The driver now registers 3 instances per RGB chip, named
"thingmX:{red,green,blue}:ledY" where X is the hidraw minor number and Y
is the RGB chip number (as seen by the firmware).

This patch also uses work queues to defer calls with the device, which
now allows triggers to work as expected with this LED device.

Also remove the brightness structure field and the brightness_get
backend, as it is already handled by the LED class, and changes the
prefix of functions and structures to thingm_ to match the driver name.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>