Pull more parisc updates from Helge Deller:

 - During this merge window O_NONBLOCK was changed to become 000200000,
   but we missed that the syscalls timerfd_create(), signalfd4(),
   eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict
   bit-wise check of the flags parameter.

   To provide backward compatibility with existing userspace we
   introduce parisc specific wrappers for those syscalls which filter
   out the old O_NONBLOCK value and replaces it with the new one.

 - Prevent HIL bus driver to get stuck when keyboard or mouse isn't
   attached

 - Improve error return codes when setting rtc time

 - Minor documentation fix in pata_ns87415.c

* 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  ata: pata_ns87415.c: Document support on parisc with superio chip
  parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage
  hil/parisc: Disable HIL driver when it gets stuck
  parisc: Improve error return codes when setting rtc time

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

Pull input updates from Dmitry Torokhov:

 - a new driver for ADC driven joysticks

 - a new Zintix touchscreen driver

 - enhancements to Intel SoC button array driver

 - support for F3A "function" in Synaptics RMI4 driver

 - assorted driver fixups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
  Input: Add MAINTAINERS entry for SiS i2c touch input driver
  Input: evdev - per-client waitgroups
  Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1
  Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2
  Input: synaptics-rmi4 - support bootloader v8 in f34v7
  Input: synaptics-rmi4 - add support for F3A
  Input: synaptics-rmi4 - rename f30_data to gpio_data
  Input: add zinitix touchscreen driver
  dt-bindings: input/touchscreen: add bindings for zinitix
  Input: joystick - add ADC attached joystick driver.
  dt-bindings: input: Add docs for ADC driven joystick
  Input: sun4i-ps2 - fix handling of platform_get_irq() error
  Input: twl4030_keypad - fix handling of platform_get_irq() error
  Input: omap4-keypad - fix handling of platform_get_irq() error
  Input: ep93xx_keypad - fix handling of platform_get_irq() error
  Input: stmfts - fix a & vs && typo
  Input: imx6ul_tsc - unify open/close and PM paths
  Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()
  Input: elants_i2c - fix typo for an attribute to show calibration count
  Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.
  ...

Pull chrome platform updates from Benson Leung:
 "cros-ec:
   - Error code cleanup across cros-ec by Guenter
   - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status

  cros_ec_typec:
   - Landed initial USB4 support in typec connector class driver for
     cros_ec
   - Role switch bugfix on disconnect, and reordering configuration
     steps

  cros_ec_lightbar:
   - Fix buffer outsize and result for get_lightbar_version

  misc:
   - Remove config MFD_CROS_EC, now that transition from MFD is complete
   - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard
     keymap"

* tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA
  platform/chrome: Use kobj_to_dev() instead of container_of()
  platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer()
  platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites
  platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config
  platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command
  platform/chrome: cros_ec_trace: Add fields to command traces
  platform/chrome: cros_ec_typec: Re-order connector configuration steps
  platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect
  platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role()
  platform/chrome: cros_ec_typec: USB4 support
  pwm: cros-ec: Simplify EC error handling
  platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes
  platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT
  pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status
  platform/chrome: cros_ec_sysfs: Report range of error codes from EC
  cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status
  iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full).  Usually one
will then have to reboot the machine because all you see is and endless
output of:
 Transaction add failed: transaction already queued?

In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.

Tested on a HP 730 and a HP 715/64 machine.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>

Prepare input updates for 5.10 merge window.

Pull Hyper-V updates from Wei Liu:

 - a series from Boqun Feng to support page size larger than 4K

 - a few miscellaneous clean-ups

* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions
  x86/hyperv: Remove aliases with X64 in their name
  PCI: hv: Document missing hv_pci_protocol_negotiation() parameter
  scsi: storvsc: Support PAGE_SIZE larger than 4K
  Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes
  HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes
  Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes
  hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication
  hv: hyperv.h: Introduce some hvpfn helper functions
  Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header
  Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs()
  Drivers: hv: vmbus: Introduce types of GPADL
  Drivers: hv: vmbus: Move __vmbus_open()
  Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl
  drivers: hv: remove cast from hyperv_die_event

All evdev clients share a common waitgroup. On new input events, all
clients waiting on this waitgroup are woken up, even those filtering out
the events, possibly more than once per event. This leads to duplicated
and unwanted wakeups.

Split the shared waitgroup into per-client waitgroups for more
fine-grained wakeups.

Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Link: https://lore.kernel.org/r/20200429184126.2155-1-kl@kl.wtf
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With the new RMI4 F3A support, we're now able to enable full RMI4
support for this model.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201005114919.371592-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

With the new RMI4 F3A support, we're now able to enable full RMI4
support for this model. We also tidy up the comments a bit, as the X1E
is essentially the same computer as the P1.

Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20200930225046.173190-3-Jason@zx2c4.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>