There is a more complete atmel patch-series out by Nick Dyer that fixes
this and other things, but in the meantime this is the minimal thing to
get the touchscreen going on (at least my) Pixel Chromebook.

Not that I want my dirty fingers near that beautiful screen, but it
seems that a non-initialized touchscreen will also end up being a
constant wakeup source, so you have to disable it to go to sleep.  And
it's easier to just fix the initialization sequence.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This same driver can be used by atmel based touchscreens and touchpads
(buttonpads). Platform data may specify a device is a touchpad
using the is_tp flag.

This will cause the driver to perform some touchpad specific
initializations, such as:
  * register input device name "Atmel maXTouch Touchpad" instead of
  Touchscreen.
  * register BTN_LEFT & BTN_TOOL_* event types.
  * register axis resolution (as a fixed constant, for now)
  * register BUTTONPAD property
  * process GPIO buttons using reportid T19

Input event GPIO mapping is done by the platform data key_map array.

key_map[x] should contain the KEY or BTN code to send when processing
GPIOx from T19. To specify a GPIO as not an input source, populate
with KEY_RESERVED, or 0.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Tested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull second set of s390 patches from Martin Schwidefsky:
 "The main part of this merge are Heikos uaccess patches.  Together with
  commit 09884964335e ("mm: do not grow the stack vma just because of an
  overrun on preceding vma") the user string access is hopefully fixed
  for good.

  In addition some bug fixes and two cleanup patches."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/module: fix compile warning
  qdio: remove unused parameters
  s390/uaccess: fix kernel ds access for page table walk
  s390/uaccess: fix strncpy_from_user string length check
  input: disable i8042 PC Keyboard controller for s390
  s390/dis: Fix invalid array size
  s390/uaccess: remove pointless access_ok() checks
  s390/uaccess: fix strncpy_from_user/strnlen_user zero maxlen case
  s390/uaccess: shorten strncpy_from_user/strnlen_user
  s390/dasd: fix unresponsive device after all channel paths were lost
  s390/mm: ignore change bit for vmemmap
  s390/page table dumper: add support for change-recording override bit

additionally comment out unused code (which may be used later)

Signed-off-by: Helge Deller <deller@gmx.de>

Just add s390 to the list of architectures that don't want this driver.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...

Pull ARM SoC-specific updates from Arnd Bergmann:
 "This is a larger set of new functionality for the existing SoC
  families, including:

   - vt8500 gains support for new CPU cores, notably the Cortex-A9 based
     wm8850

   - prima2 gains support for the "marco" SoC family, its SMP based
     cousin

   - tegra gains support for the new Tegra4 (Tegra114) family

   - socfpga now supports a newer version of the hardware including SMP

   - i.mx31 and bcm2835 are now using DT probing for their clocks

   - lots of updates for sh-mobile

   - OMAP updates for clocks, power management and USB

   - i.mx6q and tegra now support cpuidle

   - kirkwood now supports PCIe hot plugging

   - tegra clock support is updated

   - tegra USB PHY probing gets implemented diffently"

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits)
  ARM: prima2: remove duplicate v7_invalidate_l1
  ARM: shmobile: r8a7779: Correct TMU clock support again
  ARM: prima2: fix __init section for cpu hotplug
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3)
  ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3)
  arm: socfpga: Add SMP support for actual socfpga harware
  arm: Add v7_invalidate_l1 to cache-v7.S
  arm: socfpga: Add entries to enable make dtbs socfpga
  arm: socfpga: Add new device tree source for actual socfpga HW
  ARM: tegra: sort Kconfig selects for Tegra114
  ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114
  ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC
  ARM: tegra: Fix build error for gic update
  ARM: tegra: remove empty tegra_smp_init_cpus()
  ARM: shmobile: Register ARM architected timer
  ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move
  ARM: shmobile: r8a7779: Correct TMU clock support
  ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT
  ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles
  ARM: mxs: use apbx bus clock to drive the timers on timrotv2
  ...

Pull tty/serial patches from Greg Kroah-Hartman:
 "Here's the big tty/serial driver patches for 3.9-rc1.

  More tty port rework and fixes from Jiri here, as well as lots of
  individual serial driver updates and fixes.

  All of these have been in the linux-next tree for a while."

* tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: mxser: improve error handling in mxser_probe() and mxser_module_init()
  serial: imx: fix uninitialized variable warning
  serial: tegra: assume CONFIG_OF
  TTY: do not update atime/mtime on read/write
  lguest: select CONFIG_TTY to build properly.
  ARM defconfigs: add missing inclusions of linux/platform_device.h
  fb/exynos: include platform_device.h
  ARM: sa1100/assabet: include platform_device.h directly
  serial: imx: Fix recursive locking bug
  pps: Fix build breakage from decoupling pps from tty
  tty: Remove ancient hardpps()
  pps: Additional cleanups in uart_handle_dcd_change
  pps: Move timestamp read into PPS code proper
  pps: Don't crash the machine when exiting will do
  pps: Fix a use-after free bug when unregistering a source.
  pps: Use pps_lookup_dev to reduce ldisc coupling
  pps: Add pps_lookup_dev() function
  tty: serial: uartlite: Support uartlite on big and little endian systems
  tty: serial: uartlite: Fix sparse and checkpatch warnings
  serial/arc-uart: Miscll DT related updates (Grant's review comments)
  ...

Fix up trivial conflicts, mostly just due to the TTY config option
clashing with the EXPERIMENTAL removal.

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

Pull ACPI and power management updates from Rafael Wysocki:

 - Rework of the ACPI namespace scanning code from Rafael J.  Wysocki
   with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
   Toshi Kani, and Yinghai Lu.

 - ACPI power resources handling and ACPI device PM update from Rafael
   J Wysocki.

 - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
   contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.

 - Support for Intel Lynxpoint LPSS from Mika Westerberg.

 - cpuidle update from Len Brown including Intel Haswell support, C1
   state for intel_idle, removal of global pm_idle.

 - cpuidle fixes and cleanups from Daniel Lezcano.

 - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
   contributions from Stratos Karafotis and Rickard Andersson.

 - Intel P-states driver for Sandy Bridge processors from Dirk
   Brandewie.

 - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.

 - cpufreq fixes related to ordering issues between acpi-cpufreq and
   powernow-k8 from Borislav Petkov and Matthew Garrett.

 - cpufreq support for Calxeda Highbank processors from Mark Langsdorf
   and Rob Herring.

 - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
   from Shawn Guo.

 - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
   and Inderpal Singh.

 - Support for "lightweight suspend" from Zhang Rui.

 - Removal of the deprecated power trace API from Paul Gortmaker.

 - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
   Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
   Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
   Ishimatsu.

* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
  PM idle: remove global declaration of pm_idle
  unicore32 idle: delete stray pm_idle comment
  openrisc idle: delete pm_idle
  mn10300 idle: delete pm_idle
  microblaze idle: delete pm_idle
  m32r idle: delete pm_idle, and other dead idle code
  ia64 idle: delete pm_idle
  cris idle: delete idle and pm_idle
  ARM64 idle: delete pm_idle
  ARM idle: delete pm_idle
  blackfin idle: delete pm_idle
  sparc idle: rename pm_idle to sparc_idle
  sh idle: rename global pm_idle to static sh_idle
  x86 idle: rename global pm_idle to static x86_idle
  APM idle: register apm_cpu_idle via cpuidle
  cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
  cpufreq / intel_pstate: Change to disallow module build
  tools/power turbostat: display SMI count by default
  intel_idle: export both C1 and C1E
  ACPI / hotplug: Fix concurrency issues and memory leaks
  ...