Since there are uses for I2C_M_NOSTART which are much more sensible and
standard than most of the protocol mangling functionality (the main one
being gather writes to devices where something like a register address
needs to be inserted before a block of data) create a new I2C_FUNC_NOSTART
for this feature and update all the users to use it.

Also strengthen the disrecommendation of the protocol mangling while we're
at it.

In the case of regmap-i2c we remove the requirement for mangling as
I2C_M_NOSTART is the only mangling feature which is being used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...

Pull arm-soc driver specific updates from Olof Johansson:
 "These changes are specific to some driver that may be used by multiple
  boards or socs.  The most significant change in here is the move of
  the samsung iommu code from a platform specific in-kernel interface to
  the generic iommu subsystem."

Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mmc: dt: Consolidate DT bindings
  iommu/exynos: Add iommu driver for EXYNOS Platforms
  ARM: davinci: optimize the DMA ISR
  ARM: davinci: implement DEBUG_LL port choice
  ARM: tegra: Add SMMU enabler in AHB
  ARM: tegra: Add Tegra AHB driver
  Input: pxa27x_keypad add choice to set direct_key_mask
  Input: pxa27x_keypad direct key may be low active
  Input: pxa27x_keypad bug fix for direct_key_mask
  Input: pxa27x_keypad keep clock on as wakeup source
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  ARM: dt: tegra cardhu: basic audio support
  ARM: dt: tegra30.dtsi: Add audio-related nodes
  ARM: tegra: add AUXDATA required for audio
  ...

Pull input layer updates from Dmitry Torokhov:
 - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics
   Navpoint, LM8333 keypads, Wacom I2C touhscreen);
 - updates to existing touchpad drivers (ALPS, Sntelic);
 - Wacom driver now supports Intuos5;
 - device-tree bindings in numerous drivers;
 - other cleanups and fixes.

Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think
implies that the input layer device naming is broken, but let's see.  I
brough it up with Dmitry.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: matrix-keymap - fix building keymaps
  Input: spear-keyboard - document DT bindings
  Input: spear-keyboard - add device tree bindings
  Input: matrix-keymap - wire up device tree support
  Input: matrix-keymap - uninline and prepare for device tree support
  Input: adp5588 - add support for gpio names
  Input: omap-keypad - dynamically handle register offsets
  Input: synaptics - fix compile warning
  MAINTAINERS: adjust input-related patterns
  Input: ALPS - switch to using input_mt_report_finger_count
  Input: ALPS - add semi-MT support for v4 protocol
  Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
  Input: atmel_mxt_ts - dump each message on just 1 line
  Input: atmel_mxt_ts - do not read extra (checksum) byte
  Input: atmel_mxt_ts - verify object size in mxt_write_object
  Input: atmel_mxt_ts - only allow root to update firmware
  Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
  Input: sentelic - report device's production serial number
  Input: tl6040-vibra - Device Tree support
  Input: evdev - properly handle read/write with count 0
  ...

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

Keymaps used by drivers based on matrix-keymap facilities are arrays of
unsigned shorts, not chars. Treating them otherwise produces corrupted
keymaps.

Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

The modern idiom is to use irq_domain to allocate interrupts. This is
useful partly to allow further infrastructure to be based on the domains
and partly because it makes it much easier to allocate virtual interrupts
to devices as we don't need to allocate a contiguous range of interrupt
numbers.

Convert the wm831x driver over to this infrastructure, using a legacy
IRQ mapping if an irq_base is specified in platform data and otherwise
using a linear mapping, always registering the interrupts even if they
won't ever be used. Only boards which need to use the GPIOs as
interrupts should need to use an irq_base.

This means that we can't use the MFD irq_base management since the
unless we're using an explicit irq_base from platform data we can't rely
on a linear mapping of interrupts.  Instead we need to map things via
the irq_domain - provide a conveniencem function wm831x_irq() to save a
small amount of typing when doing so. Looking at this I couldn't clearly
see anything the MFD core could do to make this nicer.

Since we're not supporting device tree yet there's no meaningful
advantage if we don't do this conversion in one, the fact that the
interrupt resources are used for repeated IP blocks makes accessor
functions for the irq_domain more trouble to do than they're worth.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

* linus/master: (805 commits)
  tty: Fix LED error return
  openvswitch: checking wrong variable in queue_userspace_packet()
  bonding: Fix LACPDU rx_dropped commit.
  Linux 3.4-rc7
  ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1
  ARM: EXYNOS: use s5p-timer for UniversalC210 board
  ARM / mach-shmobile: Invalidate caches when booting secondary cores
  ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix
  ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix
  ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper
  ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper
  MAINTAINERS: Add myself as the cpufreq maintainer
  dm mpath: check if scsi_dh module already loaded before trying to load
  dm thin: correct module description
  dm thin: fix unprotected use of prepared_discards list
  dm thin: reinstate missing mempool_free in cell_release_singleton
  gpio/exynos: Fix compiler warnings when non-exynos machines are selected
  gpio: pch9: Use proper flow type handlers
  powerpc/irq: Fix another case of lazy IRQ state getting out of sync
  ks8851: Update link status during link change interrupt
  ...

Conflicts:
	drivers/media/common/tuners/xc5000.c
	drivers/media/common/tuners/xc5000.h
	drivers/usb/gadget/uvc_queue.c