Pull ARM SoC updates from Arnd Bergmann:
 "These are mostly minor cleanups and bugfixes that address harmless
  problems.

  The largest branch is a conversion of the omap platform to use GPIO
  descriptors throughout the tree, for any devices that are not fully
  converted to devicetree.

  The Samsung Exynos platform gains back support for the Exynos4212 chip
  that was previously unused and removed but is now used for the Samsung
  Galaxy Tab3"

* tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  ARM: omap2: Fix copy/paste bug
  MAINTAINERS: Replace my email address
  Input: ads7846 - fix pointer cast warning
  Input: ads7846 - Fix usage of match data
  ARM: omap2: Fix checkpatch issues
  arm: omap1: replace printk() with pr_err macro
  ARM: omap: Fix checkpatch issues
  ARM: s3c: Switch i2c drivers back to use .probe()
  ARM: versatile: mark mmc_status() static
  ARM: spear: include "pl080.h" for pl080_get_signal() prototype
  ARM: sa1100: address missing prototype warnings
  ARM: pxa: fix missing-prototypes warnings
  ARM: orion5x: fix d2net gpio initialization
  ARM: omap2: fix missing tick_broadcast() prototype
  ARM: omap1: add missing include
  ARM: lpc32xx: add missing include
  ARM: imx: add missing include
  ARM: highbank: add missing include
  ARM: ep93xx: fix missing-prototype warnings
  ARM: davinci: fix davinci_cpufreq_init() declaration
  ...

Pull input updates from Dmitry Torokhov:

 - improvements to PS/2 handling for case when EC has already latched a
   scancode in the data register, but the kernel expects to receive an
   ACK to a command it sent to a device (such as keyboard LED toggle)

 - input drivers for devices connected over I2C bus have been switched
   back to using [new] .probe()

 - uinput allows userspace to inject timestamps for input events

 - support for capacitive keys in Atmel touch controller driver

 - assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other
   drivers

* tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: pm8941-powerkey - fix debounce on gen2+ PMICs
  MAINTAINERS: Adjust Qualcomm driver globbing
  Input: gameport - provide default trigger() and read()
  Input: tps65219-pwrbutton - use regmap_set_bits()
  Input: tps65219-pwrbutton - convert to .remove_new()
  Input: tests - add test to cover all input_grab_device() function
  Input: gpio-keys - use input_report_key()
  Input: xpad - spelling fixes for "Xbox"
  Input: add HAS_IOPORT dependencies
  Input: libps2 - do not discard non-ack bytes when controlling LEDs
  Input: libps2 - introduce common interrupt handler
  Input: libps2 - fix aborting PS/2 commands
  Input: libps2 - fix NAK handling
  Input: libps2 - rework handling of command response
  Input: libps2 - remove special handling of ACK for command byte
  Input: libps2 - attach ps2dev instances as serio port's drvdata
  Input: Switch i2c drivers back to use .probe()
  dt-bindings: input: cypress,cyapa: convert to dtschema
  Input: adxl34x - do not hardcode interrupt trigger type
  Input: pwm-vibra - add support for enable GPIO
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have two new drivers, some improvements to the core code, lots of
  different updates to existing GPIO drivers and some dt-bindings on
  top.

  There's nothing controversial in here and almost everything has been
  in next for more than a week (95% a lot longer than this). The only
  thing that has spent less time in next is a new driver so no risk of
  regressions.

  The single merge pulls in changes that remove all usage of global GPIO
  numbers from arch/arm/mach-omap.

  Core GPIO library:
   - remove unused symbols
   - don't spam the kernel log with messages about hogs
   - remove old sysfs API cruft
   - improve handling of GPIO masks

  New drivers:
   - add a driver for the BlueField-3 GPIO controller
   - add GPIO support for the TPS65219 PMIC

  Driver improvements:
   - extend the gpio-aggregator driver to support ramp-up/ramp-down
     delay
   - remove unnecessary CONFIG_OF guards from gpio-aggregator
   - readability improvements in gpio-tangier
   - switch i2c drivers back to using probe() now that it's been
     converted in the i2c subsystem to not taking the id parameter
   - remove unused inclusions of of_gpio.h in several drivers
   - make pm ops static in gpio-davinci and fix a comment
   - use more devres in drivers to shrink and simplify the code
   - add missing include in gpio-sa1100
   - add HAS_IOPORT KConfig dependency where needed
   - add permissions checks before accessing pins in gpio-tegra186
   - convert the gpio-zynq driver to using immutable irqchips
   - preserve output settings set by the bootloader in gpio-mpc8xxx

  Selftests:
   - tweak the variable naming in script tests

  Device tree updates:
   - convert gpio-mmio and gpio-stmpe to YAML
   - add parsing of GPIO hogs to gpio-vf610
   - add bindings for the Cirrus EP93xx GPIO controller
   - add gpio-line-names property to the gpio-pca9570 bindings
   - extend the binding for x-powers,axp209 with another block"

* tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits)
  of: unittest: drop assertions for GPIO hog messages
  gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip
  gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres
  dt-bindings: gpio: gpio-vf610: Add parsing of hogs
  gpio: lpc18xx: Remove unused of_gpio.h inclusion
  gpio: xra1403: Remove unused of_gpio.h inclusion
  gpio: mpc8xxx: Remove unused of_gpio.h inclusion
  dt-bindings: gpio: Add Cirrus EP93xx
  gpio: mpc8xxx: latch GPIOs state on module load when configured as output
  selftests: gpio: gpio-sim: Use same variable name for sysfs pathname
  gpio: mlxbf3: Add gpio driver support
  gpio: delay: Remove duplicative functionality
  gpio: aggregator: Set up a parser of delay line parameters
  gpio: aggregator: Support delay for setting up individual GPIOs
  gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections
  dt-bindings: gpio: pca9570: add gpio-line-names property
  gpiolib: remove unused gpio_cansleep()
  gpio: tps65219: add GPIO support for TPS65219 PMIC
  gpio: zynq: fix zynqmp_gpio not an immutable chip warning
  gpio: davinci: make davinci_gpio_dev_pm_ops static
  ...

Pull arm documentation move from Jonathan Corbet:
 "Move the Arm architecture documentation under Documentation/arch/.

  This brings some order to the documentation directory, declutters the
  top-level directory, and makes the documentation organization more
  closely match that of the source"

* tag 'docs-arm-move' of git://git.lwn.net/linux:
  dt-bindings: Update Documentation/arm references
  docs: update some straggling Documentation/arm references
  crypto: update some Arm documentation references
  mips: update a reference to a moved Arm Document
  arm64: Update Documentation/arm references
  arm: update in-source documentation references
  arm: docs: Move Arm documentation to Documentation/arch/

Prepare input updates for 6.5 merge window.

The Arm documentation has moved to Documentation/arch/arm; update the
last remaining references to match.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # for pwm
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

The previous bugfix caused a warning on 64-bit builds:

drivers/input/touchscreen/ads7846.c:1126:17: warning: cast to smaller integer type 'u32' (aka 'unsigned int') from 'const void *' [-Wvoid-pointer-to-int-cast]

Change the cast back to something that works on both 32-bit and 64-bit
kernels.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306100442.jStknDT1-lkp@intel.com/
Fixes: 8f7913c04f6a7 ("Input: ads7846 - Fix usage of match data")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull input fixes from Dmitry Torokhov:

 - a fix for unbalanced open count for inhibited input devices

 - fixups in Elantech PS/2 and Cyppress TTSP v5 drivers

 - a quirk to soc_button_array driver to make it work with Lenovo
   Yoga Book X90F / X90L

 - a removal of erroneous entry from xpad driver

* tag 'input-for-v6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
  Input: psmouse - fix OOB access in Elantech protocol
  Input: soc_button_array - add invalid acpi_index DMI quirk handling
  Input: fix open count when closing inhibited device
  Input: cyttsp5 - fix array length

device_get_match_data() returns the match data directly, fix
this up and fix the probe crash.

Fixes: 767d83361aaa ("Input: ads7846 - Convert to use software nodes")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20230606191304.3804174-1-linus.walleij@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Nokia 770 is using GPIOs from the global numberspace on the
CBUS node to pass down to the LCD controller. This regresses when we
let the OMAP GPIO driver use dynamic GPIO base.

The Nokia 770 now has dynamic allocation of IRQ numbers, so this
needs to be fixed for it to work.

As this is the only user of LCD MIPID we can easily augment the
driver to use a GPIO descriptor instead and resolve the issue.

The platform data .shutdown() callback wasn't even used in the
code, but we encode a shutdown asserting RESET in the remove()
callback for completeness sake.

The CBUS also has the ADS7846 touchscreen attached.

Populate the devices on the Nokia 770 CBUS I2C using software
nodes instead of platform data quirks. This includes the LCD
and the ADS7846 touchscreen so the conversion just brings the LCD
along with it as software nodes is an all-or-nothing design
pattern.

The ADS7846 has some limited support for using GPIO descriptors,
let's convert it over completely to using device properties and then
fix all remaining boardfile users to provide all platform data using
software nodes.

Dump the of includes and of_match_ptr() in the ADS7846 driver as part
of the job.

Since we have to move ADS7846 over to obtaining the GPIOs it is
using exclusively from descriptors, we provide descriptor tables
for the two remaining in-kernel boardfiles using ADS7846:

- PXA Spitz
- MIPS Alchemy DB1000 development board

It was too hard for me to include software node conversion of
these two remaining users at this time: the spitz is using a
hscync callback in the platform data that would require further
GPIO descriptor conversion of the Spitz, and moving the hsync
callback down into the driver: it will just become too big of
a job, but it can be done separately.

The MIPS Alchemy DB1000 is simply something I cannot test, so take
the easier approach of just providing some GPIO descriptors in
this case as I don't want the patch to grow too intrusive.

As we see that several device trees have incorrect polarity flags
and just expect to bypass the gpiolib polarity handling, fix up
all device trees too, in a separate patch.

Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>