linux.git/drivers/input/touchscreen/Kconfig, branch v6.2-rc2

Input: stmpe-ts - drop obsolete dependency on COMPILE_TEST

2022-11-22T22:20:28+00:00

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.

It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.

Signed-off-by: Jean Delvare 
Link: https://lore.kernel.org/r/20221121145203.1efb0c08@endymion.delvare
Signed-off-by: Dmitry Torokhov

Input: add driver for Himax hx83112b touchscreen devices

2022-11-07T19:28:55+00:00

This patch adds support for Himax hx83112b touchscreen devices. As there
are no publicly available data sheets for these devices, the
implementation is based on the driver of the downstream Android kernel
used in the Fairphone 3. This patch is a complete rewrite, though, and
the code bears no resemblence to the original implementation.

The driver has been tested on the aforementioned phone.

Signed-off-by: Job Noorman 
Reviewed-by: Jeff LaBundy 
Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.info
Signed-off-by: Dmitry Torokhov

Input: Add driver for Cypress Generation 5 touchscreen

2022-11-01T14:57:33+00:00

This is the basic driver for the Cypress TrueTouch Gen5 touchscreen
controllers. This driver supports only the I2C bus but it uses regmap
so SPI support could be added later.
The touchscreen can retrieve some defined zone that are handled as
buttons (according to the hardware). That is why it handles
button and multitouch events.

Reviewed-by: Maxime Ripard 
Signed-off-by: Mylène Josserand 
Signed-off-by: Alistair Francis 
Tested-by: Andreas Kemnade  # Kobo Clara HD
Tested-by: Peter Geis 
Link: https://lore.kernel.org/r/20221026114908.191472-2-alistair@alistair23.me
Signed-off-by: Dmitry Torokhov

Input: add driver for Hynitron cstxxx touchscreens

2022-10-30T04:34:16+00:00

Add support for the Hynitron cst3xx controller found on devices such
as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver
was built from sources provided by Hynitron to Anbernic (possibly
via Rockchip as an intermediary) and marked as GPLv2 in the code.
This driver was written strictly for the cst3xx series, but in
most places was left somewhat generic so support could be easily
added to other devices in the future.

Signed-off-by: Chris Morgan 
Link: https://lore.kernel.org/r/20221028202636.14341-4-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov

Input: colibri-vf50-ts - don't depend on VF610_ADC

2022-08-31T17:38:04+00:00

Any IIO ADC can be used with the driver, so do not depend
on VF610_ADC.

Signed-off-by: Max Krummenacher 
Signed-off-by: Francesco Dolcini 
Link: https://lore.kernel.org/r/20220712101619.326120-2-francesco.dolcini@toradex.com
Signed-off-by: Dmitry Torokhov

Input: touchscreen: use wrapper for pxa2xx ac97 registers

2022-05-07T20:55:48+00:00

To avoid a dependency on the pxa platform header files with
hardcoded registers, change the driver to call a wrapper
in the pxa2xx-ac97-lib that encapsulates all the other
ac97 stuff.

Acked-by: Dmitry Torokhov 
Acked-by: Robert Jarzmik 
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2022-04-01T17:14:32+00:00

Pull input updates from Dmitry Torokhov:

 - a revert of a patch resetting extra buttons on touchpads claiming to
   be buttonpads as this caused regression on certain Dell devices

 - a new driver for Mediatek MT6779 keypad

 - a new driver for Imagis touchscreen

 - rework of Google/Chrome OS "Vivaldi" keyboard handling

 - assorted driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (31 commits)
  Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"
  Input: adi - remove redundant variable z
  Input: add Imagis touchscreen driver
  dt-bindings: input/touchscreen: bindings for Imagis
  Input: synaptics - enable InterTouch on ThinkPad T14/P14s Gen 1 AMD
  Input: stmfts - fix reference leak in stmfts_input_open
  Input: add bounds checking to input_set_capability()
  Input: iqs5xx - use local input_dev pointer
  HID: google: modify HID device groups of eel
  HID: google: Add support for vivaldi to hid-hammer
  HID: google: extract Vivaldi hid feature mapping for use in hid-hammer
  Input: extract ChromeOS vivaldi physmap show function
  HID: google: switch to devm when registering keyboard backlight LED
  Input: mt6779-keypad - fix signedness bug
  Input: mt6779-keypad - add MediaTek keypad driver
  dt-bindings: input: Add bindings for Mediatek matrix keypad
  Input: da9063 - use devm_delayed_work_autocancel()
  Input: goodix - fix race on driver unbind
  Input: goodix - use input_copy_abs() helper
  Input: add input_copy_abs() function
  ...

Input: add Imagis touchscreen driver

2022-03-21T05:00:12+00:00

Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.

Reviewed-by: Jeff LaBundy 
Signed-off-by: Markuss Broks 
Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.com
Signed-off-by: Dmitry Torokhov

media: Kconfig: cleanup VIDEO_DEV dependencies

2022-03-18T04:58:35+00:00

media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.

On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
	1) enable Video4Linux and make its Kconfig options to appear;
	2) it makes the Kernel build the V4L core.

while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.

With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.

At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:

	menu "Video4Linux options"
		visible if VIDEO_DEV

	source "drivers/media/v4l2-core/Kconfig"
	endmenu

but it doesn't affect anymore the V4L core drivers.

The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:

	config VIDEO_V4L2
		tristate
		depends on (I2C || I2C=n) && VIDEO_DEV
		select RATIONAL
		select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
		default (I2C || I2C=n) && VIDEO_DEV

In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.

Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.

Suggested-by: Laurent Pinchart 
Reviewed-by: Laurent Pinchart 
Reviewed-by: Jacopo Mondi 
Reviewed-by: Neil Armstrong  # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz 
Acked-by: Łukasz Stelmach 
Signed-off-by: Mauro Carvalho Chehab

Input: ili210x - add ili251x firmware update support

2021-10-17T05:29:35+00:00

The ili251x firmware can be updated, this is used when switching between
different modes of operation of the touch surface, e.g. glove operation.
This patch implements the firmware update mechanism triggered by a write
into an sysfs attribute.

The firmware itself is distributed as an intel hex file with non-standard
types. The first two lines are of type 0xad, which indicates the start of
DataFlash payload, that is always at address 0xf000 on the ili251x, so it
can be dropped, and 0xac which indicates the position of firmware info in
the Application payload, that is always at address 0x2020 on the ili251x
and we do not care. The rest of the firmware is data of type 0x00, and we
care about that. To convert the firmware hex file into something usable
by the kernel, remove the first two lines and then use ihex2fw:

 $ tail -n +3 input.hex > temp.hex
 $ ./tools/firmware/ihex2fw temp.hex firmware/ilitek/ili251x.bin

To trigger the firmware update, place firmware file ilitek/ili251x.bin
into /lib/firmware/, write into firmware_update sysfs attribute and wait
about 30-40 seconds. The firmware update is slow. Afterward, verify the
firmware_version and mode sysfs attributes to check whether the firmware
got updated and the controller switched back to application (AP) mode by
reading out 'mode' attribute in sysfs.

Note that the content of firmware_version, e.g. 0600.0005.abcd.aa04 can
be matched to the content of the firmware hex file. The first four bytes,
0x06 0x00 0x00 0x05 can be found at ^:102030 00 05000006, the next four
bytes 0xab 0xcd 0xaa 0x04 at ^:10F000 00 nnnnnnnn ABCDAA04.

Note that the protocol differs considerably between the ili2xxx devices,
this patch therefore implements this functionality only for ili251x that
I can test.

Signed-off-by: Marek Vasut 
Link: https://lore.kernel.org/r/20210831202506.181927-3-marex@denx.de
Signed-off-by: Dmitry Torokhov