Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull input updates from Dmitry Torokhov:
 "A few new drivers:

   - driver for Azoteq IQS550/572/525 touch controllers

   - driver for Microchip AT42QT1050 keys

   - driver for GPIO controllable vibrators

   - support for GT5663 in Goodix driver

  ... along with miscellaneous driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - mark expected switch fall-through
  Input: qt1050 - add Microchip AT42QT1050 support
  Input: add support for Azoteq IQS550/572/525
  Input: add a driver for GPIO controllable vibrators
  Input: synaptics-rmi4 - fix enum_fmt
  Input: synaptics-rmi4 - fill initial format
  HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
  Input: add KEY_KBD_LAYOUT_NEXT
  Input: hyperv-keyboard - add module description
  Input: olpc_apsp - depend on ARCH_MMP
  Input: sun4i-a10-lradc-keys - add support for A83T
  Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
  Input: lpc32xx-key - add clocks property and fix DT binding example
  Input: i8042 - signal wakeup from atkbd/psmouse
  Input: goodix - add GT5663 CTP support
  Input: goodix - add regulators suppot
  Input: evdev - use struct_size() in kzalloc() and vzalloc()
  Input: edt-ft5x06 - convert to use SPDX identifier
  Input: edt-ft5x06 - enable ACPI enumeration

Prepare input updates for 5.2 merge window.

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/input/serio/libps2.c: In function ‘ps2_handle_ack’:
drivers/input/serio/libps2.c:407:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (ps2dev->flags & PS2_FLAG_NAK) {
      ^
drivers/input/serio/libps2.c:417:2: note: here
  case 0x00:
  ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The OLPC XO-1.75 and XO-4 are ARM-based laptops, using the Marvell
MMP architecture, so don't present this driver on other architectures
except for build-testing purposes.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Instead of signalling wakeup directly from i8042, let psmouse and atkbd
drivers execute basic protocol handling and only then signal wakeup
condition. This solves the issue where we increment wakeup counter
simply because we are getting responses from keyboard/mouse to the
commands we ourselves send to them as part of suspend transition.

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull input updates from Dmitry Torokhov:

 - update the ili210x touchscreen driver, refreshing the code and adding
   support for ILI251X line

 - add support for st1633 to the st1232 touchscreen driver

 - add support for sx8650 to the the sx8654 touchscreen driver

 - add support for Evervision FT5726 to the edt-ft5x06 touchscreen
   driver

 - add support for gt5688 to the Goodix touchscreen driver

 - new vibrator driver for MSM SOCs

 - miscellaneous fixes for the rest of input drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)
  Input: wacom_serial4 - add support for Wacom ArtPad II tablet
  Input: elan_i2c - add id for touchpad found in Lenovo s21e-20
  Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEV
  Input: msm-vibrator - use correct gpio header
  Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'
  Input: i8042 - rework DT node name comparisons
  Input: goodix - print values in case of inconsistencies
  Input: goodix - refer to touchscreen.txt in device tree bindings
  Input: goodix - support Goodix gt5688
  Input: synaptics_i2c - remove redundant spinlock
  Input: db9 - mark expected switch fall-through
  Input: qt2160 - remove redundant spinlock
  Input: st1232 - handle common DT bindings
  Input: ims-pcu - switch to using brightness_set_blocking()
  Input: st1232 - switch to gpiod API
  Input: ili210x - fetch touchscreen geometry from DT
  Input: msm-vibrator - tweak an error message
  Input: tm2-touchkey - acknowledge that setting brightness is a blocking call
  Input: stmfts - acknowledge that setting brightness is a blocking call
  Input: ili210x - switch to using devm_device_add_group()
  ...

Prepare input updates for 5.1 merge window.