linux.git/drivers/input/serio, branch v4.14-rc4

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-09-16T18:24:26+00:00

Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size

Input: i8042 - add Gigabyte P57 to the keyboard reset table

2017-09-15T16:51:22+00:00

Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.

BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng 
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2017-09-07T20:39:21+00:00

Pull input updates from Dmitry Torokhov:

 - a new GPIO bit-banging driver implementing PS/2 protocol

 - a new power key driver for Rockchip RK805 PMIC

 - bunch of patches constifying various device ID structures

 - Elan I2C touchpad driver now supports devices with 2 buttons

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (76 commits)
  Input: byd - make array seq static, reduces object code size
  Input: xilinx_ps2 - fix multiline comment style
  Input: pxa27x_keypad - handle return value of clk_prepare_enable
  Input: tegra-kbc - handle return value of clk_prepare_enable
  Input: PS/2 gpio bit banging driver for serio bus
  Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
  Input: ambakmi - constify amba_id
  Input: atmel_mxt_ts - add support for reset line
  Input: atmel_mxt_ts - use more managed resources
  Input: wacom_w8001 - constify serio_device_id
  Input: tsc40 - constify serio_device_id
  Input: touchwin - constify serio_device_id
  Input: touchright - constify serio_device_id
  Input: touchit213 - constify serio_device_id
  Input: penmount - constify serio_device_id
  Input: mtouch - constify serio_device_id
  Input: inexio - constify serio_device_id
  Input: hampshire - constify serio_device_id
  Input: gunze - constify serio_device_id
  Input: fujitsu_ts - constify serio_device_id
  ...

Input: xilinx_ps2 - fix multiline comment style

2017-08-31T22:01:30+00:00

Fix multiline comments style not to be reported by checkpatch.

Signed-off-by: Michal Simek 
Signed-off-by: Dmitry Torokhov

Input: PS/2 gpio bit banging driver for serio bus

2017-08-28T17:32:10+00:00

This driver provides PS/2 serio bus support by implementing bit banging
with the GPIO API. The GPIO pins, data and clock, can be configured with
a node in the device tree or by generic device properties (GDP).

Writing to a device is supported as well, though it is possible timings
can not be halt as they are tough and difficult to reach with bit banging.
Therefore it can be configured (also in DT and GDP) whether the serio
write function should be available for clients.

This driver is for development purposes and not recommended for productive
use. However, this driver can be useful e.g. when no USB port is available
or using old peripherals is desired as PS/2 controller chips getting rare.

This driver was tested on bcm2825 and on Kirin 960 and it worked well
together with the atkbd and psmouse driver.

Signed-off-by: Danilo Krummrich 
Reviewed-by: Linus Walleij 
Acked-by: Rob Herring 
Signed-off-by: Dmitry Torokhov

Input: ambakmi - constify amba_id

2017-08-24T23:07:24+00:00

amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav 
Signed-off-by: Dmitry Torokhov

parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers

2017-08-22T14:34:37+00:00

Signed-off-by: Helge Deller

Input: constify serio_device_id

2017-08-19T00:15:08+00:00

serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by  work with
const serio_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav 
Signed-off-by: Dmitry Torokhov

Input: i8042 - constify pnp_device_id

2017-08-17T20:29:28+00:00

pnp_device_id are not supposed to change at runtime. All functions
working with pnp_device_id provided by  work with
const pnp_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav 
Signed-off-by: Dmitry Torokhov

Merge branch 'bind_unbind' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next

2017-07-24T23:51:18+00:00

This brings in devm_device_add_group() and friends so that we can create
driver-specific device attributes as managed resources.