Pull input fix from Dmitry Torokhov:

 - a fix for Cypress PS/2 touchpad for regression introduced in 6.11
   merge window where a timeout condition is incorrectly reported for
   all extended Cypress commands

* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: cypress_ps2 - fix waiting for command response

Commit 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading
command status") uncovered an existing problem with cypress_ps2 driver:
it tries waiting on a PS/2 device waitqueue without using the rest of
libps2. Unfortunately without it nobody signals wakeup for the
waiting process, and each "extended" command was timing out. But the
rest of the code simply did not notice it.

Fix this by switching from homegrown way of sending request to get
command response and reading it to standard ps2_command() which does
the right thing.

Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Fixes: 8bccf667f62a ("Input: cypress_ps2 - report timeouts when reading command status")
Link: https://lore.kernel.org/r/a8252e0f-dab4-ef5e-2aa1-407a6f4c7204@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

The kernel reports that the touchpad for this device can support a
different bus.

With SMBus enabled the touchpad movement is smoother and three-finger
gestures are recognized.

Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://lore.kernel.org/r/20240719180612.1.Ib652dd808c274076f32cd7fc6c1160d2cf71753b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull input updates from Dmitry Torokhov:

 - streamlined logic in input core for handling normal input handlers vs
   input filters

 - updates to input drivers to allocate memory with sizeof(*pointer)
   instead of sizeof(type)

 - change to ads7846 touchscreen driver to use hsync GPIO instead of
   requiring platform data with special method (which is not compatible
   with boards using device tree)

 - update to adc-joystick driver to handle inverted axes

 - cleanups in various drivers switching them to use the new "guard" and
   "__free()" facilities

 - changes to several drivers (adxl34x, atmel_mxt_ts, ati-remote2,
   omap-keypad, yealink) to stop creating driver-specific device
   attributes manually and use driver core facilities for this

 - update to Cypress PS/2 protocol driver to properly handle errors from
   the PS/2 transport as well as other cleanups

 - update to edt-ft5x06 driver to support ft5426 variant

 - update to ektf2127 driver to support ektf2232 variant

 - update to exc3000 driver to support EXC81W32 variant

 - update to imagis driver to support IST3038 variant

 - other assorted driver cleanups.

* tag 'input-for-v6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
  Input: yealink - simplify locking in sysfs attribute handling
  Input: yealink - use driver core to instantiate device attributes
  Input: ati-remote2 - use driver core to instantiate device attributes
  Input: omap-keypad - use driver core to instantiate device attributes
  Input: atmel_mxt_ts - use driver core to instantiate device attributes
  Input: exc3000 - add EXC81W32 support
  dt-bindings: input: touchscreen: exc3000: add EXC81W32
  Input: twl4030-pwrbutton - fix kernel-doc warning
  Input: himax_hx83112b - add support for HX83100A
  Input: himax_hx83112b - add himax_chip struct for multi-chip support
  Input: himax_hx83112b - implement MCU register reading
  Input: himax_hx83112b - use more descriptive register defines
  dt-bindings: input: touchscreen: himax,hx83112b: add HX83100A
  Input: do not check number of events in input_pass_values()
  Input: preallocate memory to hold event values
  Input: rearrange input_alloc_device() to prepare for preallocating of vals
  Input: simplify event handling logic
  Input: make events() method return number of events processed
  Input: make sure input handlers define only one processing method
  Input: evdev - remove ->event() method
  ...

Pull x86 vmware updates from Borislav Petkov:

 - Add a unified VMware hypercall API layer which should be used by all
   callers instead of them doing homegrown solutions. This will provide
   for adding API support for confidential computing solutions like TDX

* tag 'x86_vmware_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vmware: Add TDX hypercall support
  x86/vmware: Remove legacy VMWARE_HYPERCALL* macros
  x86/vmware: Correct macro names
  x86/vmware: Use VMware hypercall API
  drm/vmwgfx: Use VMware hypercall API
  input/vmmouse: Use VMware hypercall API
  ptp/vmware: Use VMware hypercall API
  x86/vmware: Introduce VMware hypercall API

Prepare input updates for 6.11 merge window.

When dealing with byte data use u8 instead of unsigned char or int.
Stop layering error handling in cypress_ps2_sendbyte() and simply
pass on error code from ps2_sendbyte().

Additionally use u8 instead of unisgned char throughout the code.

Link: https://lore.kernel.org/r/20240628224728.2180126-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Do not override errors reported by lower layers with generic "-1",
but propagate them to the callers. Change the checks for errors to be
in the form of "if (error)" to maintain consistency.

Link: https://lore.kernel.org/r/20240628224728.2180126-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Report -ETIMEDOUT error code from cypress_ps2_read_cmd_status() when
device does not send enough data within the allotted time in response
to a command.

Link: https://lore.kernel.org/r/20240628224728.2180126-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>