We are passing a buffer with ACPI_ALLOCATE_BUFFER set to
acpi_evaluate_object, so we must free it when we are done with it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.

This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.

The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.

This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 9b13a4ca8d2c ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.

Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.

This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.

This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.

Fixes: 9b13a4ca8d2c ("Input: axp20x-pek - do not register input ...")
Reported-by: Сергей Трусов <t.rus76@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.12 kernel cycle.

  Core changes:

   - Return NULL from gpiod_get_optional() when GPIOLIB is disabled.
     This was a much discussed change. It affects use cases where people
     write drivers that might or might not be using GPIO resources. I
     have decided that this is the lesser evil right now.

   - Make gpiod_count() behave consistently across different hardware
     descriptions.

   - Fix the syntax around open drain/open source to not infer active
     high/low semantics.

  New drivers:

   - A new single-register fixed-direction framework driver for hardware
     that have lines controlled by a single register that just work in
     one direction (out or in), including IRQ support.

   - Support the Fintek F71889A GPIO SuperIO controller.

   - Support the National NI 169445 MMIO GPIO.

   - Support for the X-Gene derivative of the DWC GPIO controller

   - Support for the Rohm BD9571MWV-M PMIC GPIO controller.

   - Refactor the Gemini GPIO driver to a generic Faraday FTGPIO driver
     and replace both the Gemini and the Moxa ART custom drivers with
     this driver.

  Driver improvements:

   - A whole slew of drivers have their spinlocks chaned to raw
     spinlocks as they provide irqchips, and thus we are progressing on
     realtime compliance.

   - Use devm_irq_alloc_descs() in a slew of drivers, getting managed
     resources.

   - Support for the embedded PWM controller inside the MVEBU driver.

   - Debounce, open source and open drain support for the Aspeed driver.

   - Misc smaller fixes like spelling and syntax and whatnot"

* tag 'gpio-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
  gpio: f7188x: Add a missing break
  gpio: omap: return error if requested debounce time is not possible
  gpio: Add ROHM BD9571MWV-M PMIC GPIO driver
  gpio: gpio-wcove: fix GPIO IRQ status mask
  gpio: DT bindings, move tca9554 from pcf857x to pca953x
  gpio: move tca9554 from pcf857x to pca953x
  gpio: arizona: Correct check whether the pin is an input
  gpio: Add XRA1403 DTS binding documentation
  dt-bindings: add exar to vendor prefixes list
  gpio: gpio-wcove: fix irq pending status bit width
  gpio: dwapb: use dwapb_read instead of readl_relaxed
  gpio: aspeed: Add open-source and open-drain support
  gpio: aspeed: Add debounce support
  gpio: aspeed: dt: Add optional clocks property
  gpio: aspeed: dt: Fix description alignment in bindings document
  gpio: mvebu: Add limited PWM support
  gpio: Use unsigned int for interrupt numbers
  gpio: f7188x: Add F71889A GPIO support.
  gpio: core: Decouple open drain/source flag with active low/high
  gpio: arizona: Correct handling for reading input GPIOs
  ...

Pull input subsystem updates from Dmitry Torokhov:

 - a big update from Mauro converting input documentation to ReST format

 - Synaptics PS/2 is now aware of SMBus companion devices, which means
   that we can now use native RMI4 protocol to handle touchpads, instead
   of relying on legacy PS/2 mode.

 - we removed support from BMA180 accelerometer from input devices as it
   is now handled properly by IIO

 - update to TSC2007 to corretcly report pressure

 - other miscellaneous driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
  Input: ar1021_i2c - use BIT to check for a bit
  Input: twl4030-pwrbutton - use input_set_capability() helper
  Input: twl4030-pwrbutton - use correct device for irq request
  Input: ar1021_i2c - enable touch mode during open
  Input: add uinput documentation
  dt-bindings: input: add bindings document for ar1021_i2c driver
  dt-bindings: input: rotary-encoder: fix typo
  Input: xen-kbdfront - add module parameter for setting resolution
  ARM: pxa/raumfeld: fix compile error in rotary controller resources
  Input: xpad - do not suggest writing to Dominic
  Input: xpad - don't use literal blocks inside footnotes
  Input: xpad - note that usb/devices is now at /sys/kernel/debug/
  Input: docs - freshen up introduction
  Input: docs - split input docs into kernel- and user-facing
  Input: docs - note that MT-A protocol is obsolete
  Input: docs - update joystick documentation a bit
  Input: docs - remove disclaimer/GPL notice
  Input: fix "Game console" heading level in joystick documentation
  Input: rotary-encoder - remove references to platform data from docs
  Input: move documentation for Amiga CD32
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale MXS Low Resolution ADC
   - Freescale i.MX23/i.MX28 LRADC touchscreen
   - Motorola CPCAP Power Button
   - TI LMU (Lighting Management Unit)
   - Atmel SMC (Static Memory Controller)

  New Device Support:
   - Add support for X-Powers AXP803 to axp20x
   - Add support for Dialog Semi DA9061 to da9062-core
   - Add support for Intel Cougar Mountain to lpc_ich
   - Add support for Intel Gemini Lake to lpc_ich

  New Functionality:
   - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
   - Add IRQ sense support; motorola-cpcap
   - Add ACPI support; cros_ec
   - Add Reset support; altera-a10sr
   - Add ADC support; axp20x
   - Add AC Power support; axp20x
   - Add Runtime PM support; atmel-ebi, exynos-lpass
   - Add Battery Power Supply support; axp20x
   - Add Clock support; exynos-lpass, hi655x-pmic

  Fix-ups:
   - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
   - Add .remove() method; stm32-timers, exynos-lpass
   - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
   - Rename variables for clarity; axp20x
   - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
   - Improve formatting; arizona-core, axp20x
   - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
   - Simplify/refactor code; arizona-core, atmel-ebi
   - Improve error checking; intel_soc_pmic_core

  Bug Fixes:
   - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
   - Correct max-register value; stm32-timers
   - Extend timeout to account for clock stretching; cros_ec_spi
   - Use correct IRQ trigger type; motorola-cpcap
   - Fix bad use of IRQ sense register; motorola-cpcap
   - Logic error "||" should be "&&"; mxs-lradc-ts"

* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  input: touchscreen: mxs-lradc: || vs && typos
  dt-bindings: Add AXP803's regulator info
  mfd: axp20x: Support AXP803 variant
  dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
  dt-bindings: Make AXP20X compatible strings one per line
  mfd: intel_soc_pmic_core: Fix unchecked return value
  mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
  mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  mfd: palmas: Fixed spelling mistake in error message
  mfd: lpc_ich: Add support for Intel Gemini Lake SoC
  mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
  mfd: intel_soc_pmic: Fix a mess with compilation units
  mfd: exynos-lpass: Add runtime PM support
  mfd: exynos-lpass: Add missing remove() function
  mfd: exynos-lpass: Add support for clocks
  mfd: exynos-lpass: Remove pad retention control
  iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  mfd: cpcap: Fix bad use of IRQ sense register
  mfd: cpcap: Use ack_invert interrupts
  ...

Cleanup driver slightly by using input_set_capability() instead
of manually setting the required bits.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The interrupt should be requested for the platform device
and not for the input device.

Fixes: 7f9ce649d267 ("Input: twl4030-pwrbutton - simplify driver using devm_*")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add a parameter for setting the resolution of xen-kbdfront in order to
be able to cope with a (virtual) frame buffer of arbitrary resolution.

While at it remove the pointless second reading of parameters from
Xenstore in the device connection phase: all parameters are available
during device probing already and that is where they should be read.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Motorola CPCAP is a PMIC found in multiple smartphones.
This driver adds support for the power/on button and has
been tested in Droid 4.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>