linux.git/drivers/input/keyboard/Kconfig, branch v3.8

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2012-12-18T20:46:37+00:00

Pull second round of input updates from Dmitry Torokhov:
 "As usual, there are a couple of new drivers, input core now supports
  managed input devices (devres), a slew of drivers now have device tree
  support and a bunch of fixes and cleanups."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits)
  Input: walkera0701 - fix crash on startup
  Input: matrix-keymap - provide a proper module license
  Input: gpio_keys_polled - switch to using gpio_request_one()
  Input: gpio_keys - switch to using gpio_request_one()
  Input: wacom - fix touch support for Bamboo Fun CTH-461
  Input: xpad - add a few new VID/PID combinations
  Input: xpad - minor formatting fixes
  Input: gpio-keys-polled - honor 'autorepeat' setting in platform data
  Input: tca8418-keypad - switch to using managed resources
  Input: tca8418_keypad - increase severity of failures in probe()
  Input: tca8418_keypad - move device ID tables closer to where they are used
  Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data
  Input: tca8418_keypad - use a temporary variable for parent device
  Input: tca8418_keypad - add support for shared interrupt
  Input: tca8418_keypad - add support for device tree bindings
  Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver
  Input: bu21013_ts - add support for Device Tree booting
  Input: bu21013_ts - move GPIO init and exit functions into the driver
  Input: bu21013_ts - request regulator that actually exists
  ARM: ux500: Strip out duplicate touch screen platform information
  ...

ARM: OMAP: Fix drivers to depend on omap for internal devices

2012-12-16T23:23:37+00:00

These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.

Signed-off-by: Tony Lindgren 
Signed-off-by: Linus Torvalds

Merge tag 'v3.7-rc4' into next to sync up Wacom bits

2012-11-08T16:51:52+00:00

Linux 3.7-rc4

Merge tag 'kill-plat-sparse-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next/multiplatform

2012-11-06T15:47:09+00:00

From Linus Walleij:

This patchset will:
- Move all remaining headers out of arch/arm/plat-nomadik/include/plat
  out to e.g. include/linux/platform_data
- Delete arch/arm/plat-nomadik
- Convert Nomadik and Ux500 to SPARSE_IRQ

* tag 'kill-plat-sparse-irq' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  ARM: plat-nomadik: convert platforms to SPARSE_IRQ
  mfd/db8500-prcmu: use the irq_domain_add_simple()
  mfd/ab8500-core: use irq_domain_add_simple()
  ARM: plat-nomadik: move MTU, kill plat-nomadik
  ARM: plat-nomadik: move DMA40 header to 
  ARM: plat-nomadik: use DIV_ROUND_CLOSEST()
  ARM: plat-nomadik: pass IRQ to timer driver
  clk/ux500: explicitly include register header
  pinctrl/nomadik: merge old pincfg header
  pinctrl/nomadik: move the platform data header
  ARM: plat-nomadik: move NMK_GPIO_PER_CHIP into gpio-nomadik.h
  ARM: plat-nomadik: Introduce new DB8540 GPIO registers

ARM: plat-nomadik: move MTU, kill plat-nomadik

2012-11-05T08:55:33+00:00

This moves the MTU timer driver from arch/arm/plat-nomadik
to drivers/clocksource and moves the header file to the
platform_data directory.

As this moves the last file being compiled to an object out
of arch/arm/plat-nomadik, we have to "turn off the light"
and delete the plat-nomadik directory, because it is not
allowed to have an empty Makefile in a plat-* directory.
This is probably also a desired side effect of depopulating
the arch/arm directory of drivers. Luckily we have just
deleted all the  include files prior to this so
by moving the last one we may delete the directory.

After this all the Ux500 and Nomadik device drivers live
outside of the arch/arm hierarchy.

Cc: Alessandro Rubini 
Acked-by: Arnd Bergmann 
Signed-off-by: Linus Walleij

Merge tag 'v3.7-rc3' into next to sync up with recent USB and MFD changes

2012-10-30T07:20:56+00:00

Input: lpc32xx-keys - select INPUT_MATRIXKMAP

2012-10-30T07:10:55+00:00

This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP,
as the other drivers are doing in this regard. This fixes the following
compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not:

drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to
`matrix_keypad_build_keymap'

Signed-off-by: Roland Stigge 
Signed-off-by: Dmitry Torokhov

Input: remove CONFIG_EXPERIMENTAL from keyboard drivers

2012-10-25T07:12:23+00:00

This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Signed-off-by: Kees Cook 
Signed-off-by: Dmitry Torokhov

Input: omap-keypad: Remove dependencies to mach includes

2012-09-13T01:06:30+00:00

Remove support for omap2+ as it's no longer needed since
it's using matrix-keypad. This way we can remove depency
to plat and mach headers which is needed for ARM common
zImage support.

Also remove INT_KEYBOARD by using omap_kp->irq.

Note that this patch depends on an earlier patch
"ARM: OMAP: Move gpio.h to include/linux/platform_data".

Cc: Dmitry Torokhov 
Cc: linux-input@vger.kernel.org
Acked-by: Sourav Poddar 
Reviewed-by: Felipe Balbi 
Signed-off-by: Tony Lindgren

Input: add support for key scan interface of the LPC32xx SoC

2012-07-18T06:16:16+00:00

This is a driver for the key scan interface of the LPC32xx SoC

Signed-off-by: Roland Stigge 
Signed-off-by: Dmitry Torokhov