linux.git/drivers/input/keyboard/Kconfig, branch v3.17 Linux kernel source tree Merge tag 'v3.16-rc6' into next 2014-07-24T19:36:56+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2014-07-24T19:36:56+00:00 b9f12a5d97f652c77ef6803dccd0d40d1290f5be Merge with mainline to bring in changes to MFD to allow merging ipaq-micro-ts driver. 
Merge with mainline to bring in changes to MFD to allow merging
ipaq-micro-ts driver.
Input: add driver for Microchip's CAP1106 2014-07-18T17:53:29+00:00 Daniel Mack zonque@gmail.com 2014-07-15T16:47:52+00:00 128bb95debc8302a999a495dd21726ca422da12a This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel capacitive touch sensor. For now, only the capacitive buttons are supported, and no specific settings that can be tweaked for individual channels, except for the device-wide sensitivity gain. The defaults seem to work just fine out of the box, so I'll leave configurable parameters for someone who's in need of them and who can actually measure the impact. All registers are prepared, however. Many of them are just not used for now. The implementation does not make any attempt to be compatible to platform data driven boards, but fully depends on CONFIG_OF. Power management functions are also left for volounteers with the ability to actually test them. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel
capacitive touch sensor.

For now, only the capacitive buttons are supported, and no specific
settings that can be tweaked for individual channels, except for the
device-wide sensitivity gain. The defaults seem to work just fine out of
the box, so I'll leave configurable parameters for someone who's in need
of them and who can actually measure the impact. All registers are
prepared, however. Many of them are just not used for now.

The implementation does not make any attempt to be compatible to platform
data driven boards, but fully depends on CONFIG_OF.

Power management functions are also left for volounteers with the ability
to actually test them.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge branch 'next' into for-linus 2014-06-08T06:24:07+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2014-06-08T06:24:07+00:00 a292241cccb7e20e8b997a9a44177e7c98141859 Prepare input updates for 3.16. 
Prepare input updates for 3.16.
Input: omap-keypad - remove platform data support 2014-05-29T07:33:32+00:00 Joachim Eastwood manabian@gmail.com 2014-05-29T07:30:02+00:00 61721c88b8d85c9dc13bfeedf75dfc245f397c3c This is unused since all users (OMAP4/5) are DT only. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This is unused since all users (OMAP4/5) are DT only.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add st-keyscan driver 2014-05-14T23:39:46+00:00 Gabriel FERNANDEZ gabriel.fernandez@st.com 2014-04-12T20:45:50+00:00 062589b1399176a9c14bc68e16169f40439d658c This patch adds ST Keyscan driver to use the keypad hw a subset of ST boards provide. Specific board setup will be put in the given dt. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch adds ST Keyscan driver to use the keypad hw a subset of ST
boards provide. Specific board setup will be put in the given dt.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: fix ps2/serio module dependency 2014-05-12T19:33:52+00:00 Arnd Bergmann arnd@arndb.de 2014-05-12T18:00:15+00:00 0a4ac2ea2714b5e43293f752737b8c2731a26679 The ps2 mouse and keyboard drivers use the "serio" framework that they correctly select in Kconfig, and that in turn depends on the i8042 driver, which is also allowed to be disabled for architectures that don't have an i8042. However, Kconfig also allows i8042 to be built as a module while the serio framework is built-in, which causes this link error: drivers/built-in.o: In function `ps2_begin_command': :(.text+0x26b6cc): undefined reference to `i8042_check_port_owner' :(.text+0x26b6d4): undefined reference to `i8042_lock_chip' drivers/built-in.o: In function `ps2_end_command': :(.text+0x26b734): undefined reference to `i8042_check_port_owner' :(.text+0x26b73c): undefined reference to `i8042_unlock_chip' On x86, a specific 'select SERIO_I8042' takes care of it, but not on the other architecture that potentially have a i8042. This patch changes the Kconfig logic to ensure that whenever there is an i8042, it does get used for the serio driver, avoiding the link error above. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
The ps2 mouse and keyboard drivers use the "serio" framework that they
correctly select in Kconfig, and that in turn depends on the i8042 driver,
which is also allowed to be disabled for architectures that don't have an
i8042.

However, Kconfig also allows i8042 to be built as a module while
the serio framework is built-in, which causes this link error:

drivers/built-in.o: In function `ps2_begin_command':
:(.text+0x26b6cc): undefined reference to `i8042_check_port_owner'
:(.text+0x26b6d4): undefined reference to `i8042_lock_chip'
drivers/built-in.o: In function `ps2_end_command':
:(.text+0x26b734): undefined reference to `i8042_check_port_owner'
:(.text+0x26b73c): undefined reference to `i8042_unlock_chip'

On x86, a specific 'select SERIO_I8042' takes care of it, but
not on the other architecture that potentially have a i8042.

This patch changes the Kconfig logic to ensure that whenever
there is an i8042, it does get used for the serio driver, avoiding
the link error above.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add new driver for ARM CLPS711X keypad 2014-03-30T20:24:55+00:00 Alexander Shiyan shc_work@mail.ru 2014-03-28T16:37:14+00:00 e70f18e1c7868bebad16b21b4821b2adb8c1abf8 This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs. Target CPU contain keyboard interface which can scan 8 column lines, so we can read row GPIOs to read status and determine asserted state. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch adds a new driver for keypad for Cirrus Logic CLPS711X CPUs.
Target CPU contain keyboard interface which can scan 8 column lines,
so we can read row GPIOs to read status and determine asserted state.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: remove obsolete tnetv107x drivers 2014-03-28T08:10:11+00:00 Arnd Bergmann arnd@arndb.de 2014-03-28T07:52:36+00:00 e545ef39e06e7b1df2ef9ddbbf665b74c4e1878a The tnetv107x platform is getting removed, so the touchscreen and keypad drivers for this platform will no longer be needed either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Kevin Hilman <khilman@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
The tnetv107x platform is getting removed, so the touchscreen
and keypad drivers for this platform will no longer be needed
either.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sh_keysc - restrict non-COMPILE_TEST compilation 2013-12-05T20:51:21+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2013-12-04T16:46:06+00:00 54f05e95132bdb47fa408308d64fd293d3ffb908 Hardware supported by the driver is only found on SUPERH or ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Hardware supported by the driver is only found on SUPERH or
ARCH_SHMOBILE platforms. Restrict non-COMPILE_TEST compilation to them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sh_keysc - enable the driver on all ARM platforms 2013-10-31T15:46:08+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2013-10-31T07:48:28+00:00 e4a42f655fdbfadc41f8b2f95dca5e5d395015f5 Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Renesas ARM platforms are transitioning from single-platform to
multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the
driver available on all ARM platforms to enable it on both ARCH_SHMOBILE
and ARCH_SHMOBILE_MULTI, and increase build testing coverage with
COMPILE_TEST.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>