Prepare input updates for 6.8 merge window.

Adds a driver for a mini gamepad that communicates over i2c, the gamepad
has bidirectional thumb stick input and six buttons.

The gamepad chip utilizes the open framework from Adafruit called 'Seesaw'
to transmit the ADC data for the joystick and digital pin state for the
buttons. I have only implemented the functionality required to receive the
thumb stick and button state.

Steps in reading the gamepad state over i2c:
  1. Reset the registers
  2. Set the pin mode of the pins specified by the `BUTTON_MASK` to input
      `BUTTON_MASK`: A bit-map for the six digital pins internally
       connected to the joystick buttons.
  3. Enable internal pullup resistors for the `BUTTON_MASK`
  4. Bulk set the pin state HIGH for `BUTTON_MASK`
  5. Poll the device for button and joystick state done by:
      `seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)`

Product page:
  https://www.adafruit.com/product/5743
Arduino driver:
  https://github.com/adafruit/Adafruit_Seesaw

Driver tested on RPi Zero 2W

Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20240106015111.882325-2-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This driver does not have any in-tree users but is passing a
legacy GPIO number through platform data.

Convert it to use a GPIO descriptor, new users or outoftree
users can easily be implemented using GPIO descriptor tables
or software nodes.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231129-descriptors-input-v1-4-9433162914a3@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add the VID and PID of Razer Wolverine V2 to xpad_device.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().

This is less verbose.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/a3e30e30f18cc5d6f032c8013ce9d900c8e223e5.1702228806.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use the guard(mutex) macro for handle mutex lock/unlocks.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20231202-pxrc-guard-v3-1-2ca8bc8cf689@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 6.7 merge window.

Use the module_parport_driver macro to simplify the code, which is the
same as declaring with module_init() and module_exit().

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230815080107.1089401-1-lizetao1@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.

Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add HyperX controller support to xpad_device and xpad_table.

Suggested-by: Chris Toledanes <chris.toledanes@hp.com>
Reviewed-by: Carl Ng <carl.ng@hp.com>
Signed-off-by: Max Nguyen <maxwell.nguyen@hp.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230906231514.4291-1-hphyperxdev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>