Pull rdma updates from Jason Gunthorpe:
 "Nothing exciting this cycle, most of the diffstat is changing SPDX
  'or' to 'OR'.

  Summary:

   - Bugfixes for hns, mlx5, and hfi1

   - Hardening patches for size_*, counted_by, strscpy

   - rts fixes from static analysis

   - Dump SRQ objects in rdma netlink, with hns support

   - Fix a performance regression in mlx5 MR deregistration

   - New XDR (200Gb/lane) link speed

   - SRQ record doorbell latency optimization for hns

   - IPSEC support for mlx5 multi-port mode

   - ibv_rereg_mr() support for irdma

   - Affiliated event support for bnxt_re

   - Opt out for the spec compliant qkey security enforcement as we
     discovered SW that breaks under enforcement

   - Comment and trivial updates"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
  IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
  RDMA/mlx5: Fix mkey cache WQ flush
  RDMA/hfi1: Workaround truncation compilation error
  IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
  RDMA/core: Remove NULL check before dev_{put, hold}
  RDMA/hfi1: Remove redundant assignment to pointer ppd
  RDMA/mlx5: Change the key being sent for MPV device affiliation
  RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
  RDMA/hns: Fix init failure of RoCE VF and HIP08
  RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
  RDMA/hns: The UD mode can only be configured with DCQCN
  RDMA/hns: Add check for SL
  RDMA/hns: Fix signed-unsigned mixed comparisons
  RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
  RDMA/hns: Fix printing level of asynchronous events
  RDMA/core: Add support to set privileged QKEY parameter
  RDMA/bnxt_re: Do not report SRQ error in srq notification
  RDMA/bnxt_re: Report async events and errors
  RDMA/bnxt_re: Update HW interface headers
  IB/mlx5: Fix rdma counter binding for RAW QP
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
  scsi_debug) plus the usual assorted minor fixes and updates.

  The major change this time around is a prep patch for rethreading of
  the driver reset handler API not to take a scsi_cmd structure which
  starts to reduce various drivers' dependence on scsi_cmd in error
  handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
  scsi: ufs: core: Leave space for '\0' in utf8 desc string
  scsi: ufs: core: Conversion to bool not necessary
  scsi: ufs: core: Fix race between force complete and ISR
  scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
  scsi: aic79xx: Fix up NULL command in ahd_done()
  scsi: message: fusion: Initialize return value in mptfc_bus_reset()
  scsi: mpt3sas: Fix loop logic
  scsi: snic: Remove useless code in snic_dr_clean_pending_req()
  scsi: core: Add comment to target_destroy in scsi_host_template
  scsi: core: Clean up scsi_dev_queue_ready()
  scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
  scsi: target: core: Fix kernel-doc comment
  scsi: pmcraid: Fix kernel-doc comment
  scsi: core: Handle depopulation and restoration in progress
  scsi: ufs: core: Add support for parsing OPP
  scsi: ufs: core: Add OPP support for scaling clocks and regulators
  scsi: ufs: dt-bindings: common: Add OPP table
  scsi: scsi_debug: Add param to control sdev's allow_restart
  scsi: scsi_debug: Add debugfs interface to fail target reset
  scsi: scsi_debug: Add new error injection type: Reset LUN failed
  ...

Pull sysctl updates from Luis Chamberlain:
 "To help make the move of sysctls out of kernel/sysctl.c not incur a
  size penalty sysctl has been changed to allow us to not require the
  sentinel, the final empty element on the sysctl array. Joel Granados
  has been doing all this work. On the v6.6 kernel we got the major
  infrastructure changes required to support this. For v6.7-rc1 we have
  all arch/ and drivers/ modified to remove the sentinel. Both arch and
  driver changes have been on linux-next for a bit less than a month. It
  is worth re-iterating the value:

   - this helps reduce the overall build time size of the kernel and run
     time memory consumed by the kernel by about ~64 bytes per array

   - the extra 64-byte penalty is no longer inncurred now when we move
     sysctls out from kernel/sysctl.c to their own files

  For v6.8-rc1 expect removal of all the sentinels and also then the
  unneeded check for procname == NULL.

  The last two patches are fixes recently merged by Krister Johansen
  which allow us again to use softlockup_panic early on boot. This used
  to work but the alias work broke it. This is useful for folks who want
  to detect softlockups super early rather than wait and spend money on
  cloud solutions with nothing but an eventual hung kernel. Although
  this hadn't gone through linux-next it's also a stable fix, so we
  might as well roll through the fixes now"

* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
  watchdog: move softlockup_panic back to early_param
  proc: sysctl: prevent aliased sysctls from getting passed to init
  intel drm: Remove now superfluous sentinel element from ctl_table array
  Drivers: hv: Remove now superfluous sentinel element from ctl_table array
  raid: Remove now superfluous sentinel element from ctl_table array
  fw loader: Remove the now superfluous sentinel element from ctl_table array
  sgi-xp: Remove the now superfluous sentinel element from ctl_table array
  vrf: Remove the now superfluous sentinel element from ctl_table array
  char-misc: Remove the now superfluous sentinel element from ctl_table array
  infiniband: Remove the now superfluous sentinel element from ctl_table array
  macintosh: Remove the now superfluous sentinel element from ctl_table array
  parport: Remove the now superfluous sentinel element from ctl_table array
  scsi: Remove now superfluous sentinel element from ctl_table array
  tty: Remove now superfluous sentinel element from ctl_table array
  xen: Remove now superfluous sentinel element from ctl_table array
  hpet: Remove now superfluous sentinel element from ctl_table array
  c-sky: Remove now superfluous sentinel element from ctl_talbe array
  powerpc: Remove now superfluous sentinel element from ctl_table arrays
  riscv: Remove now superfluous sentinel element from ctl_table array
  x86/vdso: Remove now superfluous sentinel element from ctl_table array
  ...

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Support usec resolution of TCP timestamps, enabled selectively by a
     route attribute.

   - Defer regular TCP ACK while processing socket backlog, try to send
     a cumulative ACK at the end. Increase single TCP flow performance
     on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).

   - The Fair Queuing (FQ) packet scheduler:
       - add built-in 3 band prio / WRR scheduling
       - support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
       - improve inactive flow reporting
       - optimize the layout of structures for better cache locality

   - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
     replacement for the old MD5 option.

   - Add more retransmission timeout (RTO) related statistics to
     TCP_INFO.

   - Support sending fragmented skbs over vsock sockets.

   - Make sure we send SIGPIPE for vsock sockets if socket was
     shutdown().

   - Add sysctl for ignoring lower limit on lifetime in Router
     Advertisement PIO, based on an in-progress IETF draft.

   - Add sysctl to control activation of TCP ping-pong mode.

   - Add sysctl to make connection timeout in MPTCP configurable.

   - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
     limit the number of wakeups.

   - Support netlink GET for MDB (multicast forwarding), allowing user
     space to request a single MDB entry instead of dumping the entire
     table.

   - Support selective FDB flushing in the VXLAN tunnel driver.

   - Allow limiting learned FDB entries in bridges, prevent OOM attacks.

   - Allow controlling via configfs netconsole targets which were
     created via the kernel cmdline at boot, rather than via configfs at
     runtime.

   - Support multiple PTP timestamp event queue readers with different
     filters.

   - MCTP over I3C.

  BPF:

   - Add new veth-like netdevice where BPF program defines the logic of
     the xmit routine. It can operate in L3 and L2 mode.

   - Support exceptions - allow asserting conditions which should never
     be true but are hard for the verifier to infer. With some extra
     flexibility around handling of the exit / failure:

          https://lwn.net/Articles/938435/

   - Add support for local per-cpu kptr, allow allocating and storing
     per-cpu objects in maps. Access to those objects operates on the
     value for the current CPU.

     This allows to deprecate local one-off implementations of per-CPU
     storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.

   - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
     for systemd to re-implement the LogNamespace feature which allows
     running multiple instances of systemd-journald to process the logs
     of different services.

   - Enable open-coded task_vma iteration, after maple tree conversion
     made it hard to directly walk VMAs in tracing programs.

   - Add open-coded task, css_task and css iterator support. One of the
     use cases is customizable OOM victim selection via BPF.

   - Allow source address selection with bpf_*_fib_lookup().

   - Add ability to pin BPF timer to the current CPU.

   - Prevent creation of infinite loops by combining tail calls and
     fentry/fexit programs.

   - Add missed stats for kprobes to retrieve the number of missed
     kprobe executions and subsequent executions of BPF programs.

   - Inherit system settings for CPU security mitigations.

   - Add BPF v4 CPU instruction support for arm32 and s390x.

  Changes to common code:

   - overflow: add DEFINE_FLEX() for on-stack definition of structs with
     flexible array members.

   - Process doc update with more guidance for reviewers.

  Driver API:

   - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
     mutex in most places and remove a lot of smaller locks.

   - Create a common DPLL configuration API. Allow configuring and
     querying state of PLL circuits used for clock syntonization, in
     network time distribution.

   - Unify fragmented and full page allocation APIs in page pool code.
     Let drivers be ignorant of PAGE_SIZE.

   - Rework PHY state machine to avoid races with calls to phy_stop().

   - Notify DSA drivers of MAC address changes on user ports, improve
     correctness of offloads which depend on matching port MAC
     addresses.

   - Allow antenna control on injected WiFi frames.

   - Reduce the number of variants of napi_schedule().

   - Simplify error handling when composing devlink health messages.

  Misc:

   - A lot of KCSAN data race "fixes", from Eric.

   - A lot of __counted_by() annotations, from Kees.

   - A lot of strncpy -> strscpy and printf format fixes.

   - Replace master/slave terminology with conduit/user in DSA drivers.

   - Handful of KUnit tests for netdev and WiFi core.

  Removed:

   - AppleTalk COPS.

   - AppleTalk ipddp.

   - TI AR7 CPMAC Ethernet driver.

  Drivers:

   - Ethernet high-speed NICs:
      - Intel (100G, ice, idpf):
         - add a driver for the Intel E2000 IPUs
         - make CRC/FCS stripping configurable
         - cross-timestamping for E823 devices
         - basic support for E830 devices
         - use aux-bus for managing client drivers
         - i40e: report firmware versions via devlink
      - nVidia/Mellanox:
         - support 4-port NICs
         - increase max number of channels to 256
         - optimize / parallelize SF creation flow
      - Broadcom (bnxt):
         - enhance NIC temperature reporting
         - support PAM4 speeds and lane configuration
      - Marvell OcteonTX2:
         - PTP pulse-per-second output support
         - enable hardware timestamping for VFs
      - Solarflare/AMD:
         - conntrack NAT offload and offload for tunnels
      - Wangxun (ngbe/txgbe):
         - expose HW statistics
      - Pensando/AMD:
         - support PCI level reset
         - narrow down the condition under which skbs are linearized
      - Netronome/Corigine (nfp):
         - support CHACHA20-POLY1305 crypto in IPsec offload

   - Ethernet NICs embedded, slower, virtual:
      - Synopsys (stmmac):
         - add Loongson-1 SoC support
         - enable use of HW queues with no offload capabilities
         - enable PPS input support on all 5 channels
         - increase TX coalesce timer to 5ms
      - RealTek USB (r8152): improve efficiency of Rx by using GRO frags
      - xen: support SW packet timestamping
      - add drivers for implementations based on TI's PRUSS (AM64x EVM)

   - nVidia/Mellanox Ethernet datacenter switches:
      - avoid poor HW resource use on Spectrum-4 by better block
        selection for IPv6 multicast forwarding and ordering of blocks
        in ACL region

   - Ethernet embedded switches:
      - Microchip:
         - support configuring the drive strength for EMI compliance
         - ksz9477: partial ACL support
         - ksz9477: HSR offload
         - ksz9477: Wake on LAN
      - Realtek:
         - rtl8366rb: respect device tree config of the CPU port

   - Ethernet PHYs:
      - support Broadcom BCM5221 PHYs
      - TI dp83867: support hardware LED blinking

   - CAN:
      - add support for Linux-PHY based CAN transceivers
      - at91_can: clean up and use rx-offload helpers

   - WiFi:
      - MediaTek (mt76):
         - new sub-driver for mt7925 USB/PCIe devices
         - HW wireless <> Ethernet bridging in MT7988 chips
         - mt7603/mt7628 stability improvements
      - Qualcomm (ath12k):
         - WCN7850:
            - enable 320 MHz channels in 6 GHz band
            - hardware rfkill support
            - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
              make scan faster
            - read board data variant name from SMBIOS
        - QCN9274: mesh support
      - RealTek (rtw89):
         - TDMA-based multi-channel concurrency (MCC)
      - Silicon Labs (wfx):
         - Remain-On-Channel (ROC) support

   - Bluetooth:
      - ISO: many improvements for broadcast support
      - mark BCM4378/BCM4387 as BROKEN_LE_CODED
      - add support for QCA2066
      - btmtksdio: enable Bluetooth wakeup from suspend"

* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
  net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
  net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
  net: mana: Use xdp_set_features_flag instead of direct assignment
  vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
  iavf: delete the iavf client interface
  iavf: add a common function for undoing the interrupt scheme
  iavf: use unregister_netdev
  iavf: rely on netdev's own registered state
  iavf: fix the waiting time for initial reset
  iavf: in iavf_down, don't queue watchdog_task if comms failed
  iavf: simplify mutex_trylock+sleep loops
  iavf: fix comments about old bit locks
  doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
  tools: ynl: introduce option to process unknown attributes or types
  ipvlan: properly track tx_errors
  netdevsim: Block until all devices are released
  nfp: using napi_build_skb() to replace build_skb()
  net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
  net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
  net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
  ...

In the unlikely event that workqueue allocation fails and returns NULL in
mlx5_mkey_cache_init(), delete the call to
mlx5r_umr_resource_cleanup() (which frees the QP) in
mlx5_ib_stage_post_ib_reg_umr_init().  This will avoid attempted double
free of the same QP when __mlx5_ib_add() does its cleanup.

Resolves a splat:

   Syzkaller reported a UAF in ib_destroy_qp_user

   workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR
   infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642):
   failed to create work queue
   infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642):
   mr cache init failed -12
   ==================================================================
   BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642

   Call Trace:
   <TASK>
   kasan_report (mm/kasan/report.c:590)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...
   </TASK>

   Allocated by task 1642:
   __kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026
   mm/slab_common.c:1039)
   create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720
   ./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209)
   ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347)
   mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

   Freed by task 1642:
   __kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822)
   ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112)
   mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198)
   mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076
   drivers/infiniband/hw/mlx5/main.c:4065)
   __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168)
   mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402)
   ...

Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c")
Link: https://lore.kernel.org/r/1698170518-4006-1-git-send-email-george.kennedy@oracle.com
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The cited patch tries to ensure no pending works on the mkey cache
workqueue by disabling adding new works and call flush_workqueue().
But this workqueue also has delayed works which might still be pending
the delay time to be queued.

Add cancel_delayed_work() for the delayed works which waits to be queued
and then the flush_workqueue() will flush all works which are already
queued and running.

Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup")
Link: https://lore.kernel.org/r/b8722f14e7ed81452f791764a26d2ed4cfa11478.1698256179.git.leon@kernel.org
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Resolve conflict by taking the spin_lock hunk from for-next:

 https://lore.kernel.org/r/20230928113851.5197a1ec@canb.auug.org.au

Required for the next patch.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull vfs inode time accessor updates from Christian Brauner:
 "This finishes the conversion of all inode time fields to accessor
  functions as discussed on list. Changing timestamps manually as we
  used to do before is error prone. Using accessors function makes this
  robust.

  It does not contain the switch of the time fields to discrete 64 bit
  integers to replace struct timespec and free up space in struct inode.
  But after this, the switch can be trivially made and the patch should
  only affect the vfs if we decide to do it"

* tag 'vfs-6.7.ctime' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (86 commits)
  fs: rename inode i_atime and i_mtime fields
  security: convert to new timestamp accessors
  selinux: convert to new timestamp accessors
  apparmor: convert to new timestamp accessors
  sunrpc: convert to new timestamp accessors
  mm: convert to new timestamp accessors
  bpf: convert to new timestamp accessors
  ipc: convert to new timestamp accessors
  linux: convert to new timestamp accessors
  zonefs: convert to new timestamp accessors
  xfs: convert to new timestamp accessors
  vboxsf: convert to new timestamp accessors
  ufs: convert to new timestamp accessors
  udf: convert to new timestamp accessors
  ubifs: convert to new timestamp accessors
  tracefs: convert to new timestamp accessors
  sysv: convert to new timestamp accessors
  squashfs: convert to new timestamp accessors
  server: convert to new timestamp accessors
  client: convert to new timestamp accessors
  ...

Pull iov_iter updates from Christian Brauner:
 "This contain's David's iov_iter cleanup work to convert the iov_iter
  iteration macros to inline functions:

   - Remove last_offset from iov_iter as it was only used by ITER_PIPE

   - Add a __user tag on copy_mc_to_user()'s dst argument on x86 to
     match that on powerpc and get rid of a sparse warning

   - Convert iter->user_backed to user_backed_iter() in the sound PCM
     driver

   - Convert iter->user_backed to user_backed_iter() in a couple of
     infiniband drivers

   - Renumber the type enum so that the ITER_* constants match the order
     in iterate_and_advance*()

   - Since the preceding patch puts UBUF and IOVEC at 0 and 1, change
     user_backed_iter() to just use the type value and get rid of the
     extra flag

   - Convert the iov_iter iteration macros to always-inline functions to
     make the code easier to follow. It uses function pointers, but they
     get optimised away

   - Move the check for ->copy_mc to _copy_from_iter() and
     copy_page_from_iter_atomic() rather than in memcpy_from_iter_mc()
     where it gets repeated for every segment. Instead, we check once
     and invoke a side function that can use iterate_bvec() rather than
     iterate_and_advance() and supply a different step function

   - Move the copy-and-csum code to net/ where it can be in proximity
     with the code that uses it

   - Fold memcpy_and_csum() in to its two users

   - Move csum_and_copy_from_iter_full() out of line and merge in
     csum_and_copy_from_iter() since the former is the only caller of
     the latter

   - Move hash_and_copy_to_iter() to net/ where it can be with its only
     caller"

* tag 'vfs-6.7.iov_iter' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
  iov_iter, net: Move hash_and_copy_to_iter() to net/
  iov_iter, net: Merge csum_and_copy_from_iter{,_full}() together
  iov_iter, net: Fold in csum_and_memcpy()
  iov_iter, net: Move csum_and_copy_to/from_iter() to net/
  iov_iter: Don't deal with iter->copy_mc in memcpy_from_iter_mc()
  iov_iter: Convert iterate*() to inline funcs
  iov_iter: Derive user-backedness from the iterator type
  iov_iter: Renumber ITER_* constants
  infiniband: Use user_backed_iter() to see if iterator is UBUF/IOVEC
  sound: Fix snd_pcm_readv()/writev() to use iov access functions
  iov_iter, x86: Be consistent about the __user tag on copy_mc_to_user()
  iov_iter: Remove last_offset from iov_iter as it was for ITER_PIPE

Increase name array to be large enough to overcome the following
compilation error.

drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                            ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  124 |         snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                                                    ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
  133 |                 snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1

Fixes: c03c08d50b3d ("IB/hfi1: Check upper-case EFI variables")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/238fa39a8fd60e87a5ad7e1ca6584fcdf32e9519.1698159993.git.leonro@nvidia.com
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>