linux.git/drivers/infiniband, branch v5.9-rc2

Revert "RDMA/hns: Reserve one sge in order to avoid local length error"

2020-08-20T11:35:19+00:00

This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.

This reverts commit 711195e57d341e58133d92cf8aaab1db24e4768d.

Fixes: 711195e57d34 ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li 
Signed-off-by: Jason Gunthorpe

RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request

2020-08-20T11:31:41+00:00

The following message occurs when running an AI application with TID RDMA
enabled:

hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084

The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.

When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.

If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.

Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request.  There is
also risk of a write-after-write memory corruption due to the issue.

Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.

Fixes: a0b34f75ec20 ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc:  # 5.4.x+
Reviewed-by: Mike Marciniszyn 
Reviewed-by: Dennis Dalessandro 
Signed-off-by: Kaike Wan 
Signed-off-by: Mike Marciniszyn 
Signed-off-by: Jason Gunthorpe

RDMA/bnxt_re: Do not add user qps to flushlist

2020-08-20T11:31:41+00:00

Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.

Add a check to avoid user qp addition to the flush list.

Fixes: 942c9b6ca8de ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes: c50866e2853a ("bnxt_re: fix the regression due to changes in alloc_pbl")
Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier 
Signed-off-by: Jason Gunthorpe

RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"

2020-08-20T11:31:41+00:00

There is a spelling mistake in a pr_warn message. Fix it.

Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Jason Gunthorpe

RDMA/usnic: Fix spelling mistake "transistion" -> "transition"

2020-08-18T16:18:53+00:00

There is a spelling mistake in a usnic_err error message. Fix it.

Link: https://lore.kernel.org/r/20200805141459.23069-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Jason Gunthorpe

RDMA/hns: Fix spelling mistake "epmty" -> "empty"

2020-08-18T16:18:53+00:00

There is a spelling mistake in a dev_dbg message. Fix it.

Link: https://lore.kernel.org/r/20200805141111.22804-1-colin.king@canonical.com
Signed-off-by: Colin Ian King 
Signed-off-by: Jason Gunthorpe

mm/gup: remove task_struct pointer for all gup code

2020-08-12T17:58:04+00:00

After the cleanup of page fault accounting, gup does not need to pass
task_struct around any more.  Remove that parameter in the whole gup
stack.

Signed-off-by: Peter Xu 
Signed-off-by: Andrew Morton 
Reviewed-by: John Hubbard 
Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com
Signed-off-by: Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-08-06T23:43:36+00:00

Pull rdma updates from Jason Gunthorpe:
 "A quiet cycle after the larger 5.8 effort. Substantially cleanup and
  driver work with a few smaller features this time.

   - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re

   - Removal of dead or redundant code across the drivers

   - RAW resource tracker dumps to include a device specific data blob
     for device objects to aide device debugging

   - Further advance the IOCTL interface, remove the ability to turn it
     off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands

   - Remove stubs related to devices with no pkey table

   - A shared CQ scheme to allow multiple ULPs to share the CQ rings of
     a device to give higher performance

   - Several more static checker, syzkaller and rare crashers fixed"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits)
  RDMA/mlx5: Fix flow destination setting for RDMA TX flow table
  RDMA/rxe: Remove pkey table
  RDMA/umem: Add a schedule point in ib_umem_get()
  RDMA/hns: Fix the unneeded process when getting a general type of CQE error
  RDMA/hns: Fix error during modify qp RTS2RTS
  RDMA/hns: Delete unnecessary memset when allocating VF resource
  RDMA/hns: Remove redundant parameters in set_rc_wqe()
  RDMA/hns: Remove support for HIP08_A
  RDMA/hns: Refactor hns_roce_v2_set_hem()
  RDMA/hns: Remove redundant hardware opcode definitions
  RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP
  RDMA/include: Replace license text with SPDX tags
  RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq
  RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting
  RDMA/cma: Execute rdma_cm destruction from a handler properly
  RDMA/cma: Remove unneeded locking for req paths
  RDMA/cma: Using the standard locking pattern when delivering the removal event
  RDMA/cma: Simplify DEVICE_REMOVAL for internal_id
  RDMA/efa: Add EFA 0xefa1 PCI ID
  RDMA/efa: User/kernel compatibility handshake mechanism
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-08-06T03:13:21+00:00

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

RDMA/mlx5: Fix flow destination setting for RDMA TX flow table

2020-08-06T00:09:39+00:00

For RDMA TX flow table, set destination type to be 'port' and prevent
creation of flows with TIR destination.

As RDMA TX is an egress flow table the rules on this flow table should
not forward traffic back to the NIC and should set the destination to be
the port.

Without the setting of this destination type flow rules on the RDMA TX
flow tables are not created as FW invokes a syndrome for undefined
destination for the rule.

Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering")
Link: https://lore.kernel.org/r/20200803055849.14947-1-leon@kernel.org
Signed-off-by: Michael Guralnik 
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe