linux.git/drivers/infiniband, branch v4.19-rc2

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-08-23T22:34:48+00:00

Pull more rdma updates from Jason Gunthorpe:
 "This is the SMC cleanup promised, a randconfig regression fix, and
  kernel oops fix.

  Summary:

   - Switch SMC over to rdma_get_gid_attr and remove the compat

   - Fix a crash in HFI1 with some BIOS's

   - Fix a randconfig failure"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/ucm: fix UCM link error
  IB/hfi1: Invalid NUMA node information can cause a divide by zero
  RDMA/smc: Replace ib_query_gid with rdma_get_gid_attr

mm, oom: distinguish blockable mode for mmu notifiers

2018-08-22T17:52:44+00:00

There are several blockable mmu notifiers which might sleep in
mmu_notifier_invalidate_range_start and that is a problem for the
oom_reaper because it needs to guarantee a forward progress so it cannot
depend on any sleepable locks.

Currently we simply back off and mark an oom victim with blockable mmu
notifiers as done after a short sleep.  That can result in selecting a new
oom victim prematurely because the previous one still hasn't torn its
memory down yet.

We can do much better though.  Even if mmu notifiers use sleepable locks
there is no reason to automatically assume those locks are held.  Moreover
majority of notifiers only care about a portion of the address space and
there is absolutely zero reason to fail when we are unmapping an unrelated
range.  Many notifiers do really block and wait for HW which is harder to
handle and we have to bail out though.

This patch handles the low hanging fruit.
__mmu_notifier_invalidate_range_start gets a blockable flag and callbacks
are not allowed to sleep if the flag is set to false.  This is achieved by
using trylock instead of the sleepable lock for most callbacks and
continue as long as we do not block down the call chain.

I think we can improve that even further because there is a common pattern
to do a range lookup first and then do something about that.  The first
part can be done without a sleeping lock in most cases AFAICS.

The oom_reaper end then simply retries if there is at least one notifier
which couldn't make any progress in !blockable mode.  A retry loop is
already implemented to wait for the mmap_sem and this is basically the
same thing.

The simplest way for driver developers to test this code path is to wrap
userspace code which uses these notifiers into a memcg and set the hard
limit to hit the oom.  This can be done e.g.  after the test faults in all
the mmu notifier managed memory and set the hard limit to something really
small.  Then we are looking for a proper process tear down.

[akpm@linux-foundation.org: coding style fixes]
[akpm@linux-foundation.org: minor code simplification]
Link: http://lkml.kernel.org/r/20180716115058.5559-1-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Acked-by: Christian König  # AMD notifiers
Acked-by: Leon Romanovsky  # mlx and umem_odp
Reported-by: David Rientjes 
Cc: "David (ChunMing) Zhou" 
Cc: Paolo Bonzini 
Cc: Alex Deucher 
Cc: David Airlie 
Cc: Jani Nikula 
Cc: Joonas Lahtinen 
Cc: Rodrigo Vivi 
Cc: Doug Ledford 
Cc: Jason Gunthorpe 
Cc: Mike Marciniszyn 
Cc: Dennis Dalessandro 
Cc: Sudeep Dutt 
Cc: Ashutosh Dixit 
Cc: Dimitri Sivanich 
Cc: Boris Ostrovsky 
Cc: Juergen Gross 
Cc: "Jérôme Glisse" 
Cc: Andrea Arcangeli 
Cc: Felix Kuehling 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

IB/ucm: fix UCM link error

2018-08-21T22:56:32+00:00

Building UCM with CONFIG_INFINIBAND_USER_ACCESS=m results in a
set of link errors including:

drivers/infiniband/core/ucm.o: In function `ib_ucm_event_handler':
ucm.c:(.text+0x6dc): undefined reference to `ib_copy_path_rec_to_user'
drivers/infiniband/core/ucma.o: In function `ucma_event_handler':
ucma.c:(.text+0xdc0): undefined reference to `ib_copy_ah_attr_to_user'

To get it to build-test again, this makes the option itself a
tristate, which lets Kconfig figure out the dependency correctly.

Fixes: 486edfb1039d ("IB/ucm: Fix compiling ucm.c")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Jason Gunthorpe

IB/hfi1: Invalid NUMA node information can cause a divide by zero

2018-08-20T16:45:48+00:00

If the system BIOS does not supply NUMA node information to the
PCI devices, the NUMA node is selected by choosing the current
node.

This can lead to the following crash:

divide error: 0000 SMP
CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G          IOE
------------   3.10.0-693.21.1.el7.x86_64 #1
Hardware name: Intel Corporation S2600KP/S2600KP, BIOS
SE5C610.86B.01.01.0005.101720141054 10/17/2014
Workqueue: events work_for_cpu_fn
task: ffff880174480fd0 ti: ffff880174488000 task.ti: ffff880174488000
RIP: 0010: [] hfi1_dev_affinity_init+0x129/0x6a0 [hfi1]
RSP: 0018:ffff88017448bbf8  EFLAGS: 00010246
RAX: 0000000000000011 RBX: ffff88107ffba6c0 RCX: ffff88085c22e130
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880824ad0000
RBP: ffff88017448bc48 R08: 0000000000000011 R09: 0000000000000002
R10: ffff8808582b6ca0 R11: 0000000000003151 R12: ffff8808582b6ca0
R13: ffff8808582b6518 R14: ffff8808582b6010 R15: 0000000000000012
FS:  0000000000000000(0000) GS:ffff88085ec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efc707404f0 CR3: 0000000001a02000 CR4: 00000000001607f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
 hfi1_init_dd+0x14b3/0x27a0 [hfi1]
 ? pcie_capability_write_word+0x46/0x70
 ? hfi1_pcie_init+0xc0/0x200 [hfi1]
 do_init_one+0x153/0x4c0 [hfi1]
 ? sched_clock_cpu+0x85/0xc0
 init_one+0x1b5/0x260 [hfi1]
 local_pci_probe+0x4a/0xb0
 work_for_cpu_fn+0x1a/0x30
 process_one_work+0x17f/0x440
 worker_thread+0x278/0x3c0
 ? manage_workers.isra.24+0x2a0/0x2a0
 kthread+0xd1/0xe0
 ? insert_kthread_work+0x40/0x40
 ret_from_fork+0x77/0xb0
 ? insert_kthread_work+0x40/0x40

If the BIOS is not supplying NUMA information:
  - set the default table count to 1 for all possible nodes
  - select node 0 (instead of current NUMA) node to get consistent
    performance
  - generate an error indicating that the BIOS should be upgraded

Reviewed-by: Gary Leshner 
Reviewed-by: Mike Marciniszyn 
Signed-off-by: Michael J. Ruhl 
Signed-off-by: Dennis Dalessandro 

Signed-off-by: Jason Gunthorpe

Merge branch 'linus/master' into rdma.git for-next

2018-08-16T20:21:29+00:00

rdma.git merge resolution for the 4.19 merge window

Conflicts:
 drivers/infiniband/core/rdma_core.c
   - Use the rdma code and revise with the new spelling for
     atomic_fetch_add_unless
 drivers/nvme/host/rdma.c
   - Replace max_sge with max_send_sge in new blk code
 drivers/nvme/target/rdma.c
   - Use the blk code and revise to use NULL for ib_post_recv when
     appropriate
   - Replace max_sge with max_recv_sge in new blk code
 net/rds/ib_send.c
   - Use the net code and revise to use NULL for ib_post_recv when
     appropriate

Signed-off-by: Jason Gunthorpe

Merge tag 'v4.18' into rdma.git for-next

2018-08-16T19:12:00+00:00

Resolve merge conflicts from the -rc cycle against the rdma.git tree:

Conflicts:
 drivers/infiniband/core/uverbs_cmd.c
  - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
  - Merge removal of file->ucontext in for-next with new code in -rc
 drivers/infiniband/core/uverbs_main.c
  - for-next removed code from ib_uverbs_write() that was modified
    in for-rc

Signed-off-by: Jason Gunthorpe

Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-08-16T16:21:54+00:00

Pull pci updates from Bjorn Helgaas:

 - Decode AER errors with names similar to "lspci" (Tyler Baicar)

 - Expose AER statistics in sysfs (Rajat Jain)

 - Clear AER status bits selectively based on the type of recovery (Oza
   Pawandeep)

 - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
   Gagniuc)

 - Don't clear AER status bits if we're using the "Firmware-First"
   strategy where firmware owns the registers (Alexandru Gagniuc)

 - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy
   Shevchenko)

 - Remove unnecessary includes of  (Bjorn Helgaas)

 - Defer DPC event handling to work queue (Keith Busch)

 - Use threaded IRQ for DPC bottom half (Keith Busch)

 - Print AER status while handling DPC events (Keith Busch)

 - Work around IDT switch ACS Source Validation erratum (James
   Puthukattukaran)

 - Emit diagnostics for all cases of PCIe Link downtraining (Links
   operating slower than they're capable of) (Alexandru Gagniuc)

 - Skip VFs when configuring Max Payload Size (Myron Stowe)

 - Reduce Root Port Max Payload Size if necessary when hot-adding a
   device below it (Myron Stowe)

 - Simplify SHPC existence/permission checks (Bjorn Helgaas)

 - Remove hotplug sample skeleton driver (Lukas Wunner)

 - Convert pciehp to threaded IRQ handling (Lukas Wunner)

 - Improve pciehp tolerance of missed events and initially unstable
   links (Lukas Wunner)

 - Clear spurious pciehp events on resume (Lukas Wunner)

 - Add pciehp runtime PM support, including for Thunderbolt controllers
   (Lukas Wunner)

 - Support interrupts from pciehp bridges in D3hot (Lukas Wunner)

 - Mark fall-through switch cases before enabling -Wimplicit-fallthrough
   (Gustavo A. R. Silva)

 - Move DMA-debug PCI init from arch code to PCI core (Christoph
   Hellwig)

 - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is
   supplied (Heiner Kallweit)

 - Unify PCI and DMA direction #defines (Shunyong Yang)

 - Add PCI_DEVICE_DATA() macro (Andy Shevchenko)

 - Check for VPD completion before checking for timeout (Bert Kenward)

 - Limit Netronome NFP5000 config space size to work around erratum
   (Jakub Kicinski)

 - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit)

 - Document ACPI description of PCI host bridges (Bjorn Helgaas)

 - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for
   peer-to-peer DMA support (we don't have the peer-to-peer support yet;
   this is just one piece) (Logan Gunthorpe)

 - Clean up devm_of_pci_get_host_bridge_resources() resource allocation
   (Jan Kiszka)

 - Fixup resizable BARs after suspend/resume (Christian König)

 - Make "pci=earlydump" generic (Sinan Kaya)

 - Fix ROM BAR access routines to stay in bounds and check for signature
   correctly (Rex Zhu)

 - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

 - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

 - To avoid bus errors, enable PASID only if entire path supports
   End-End TLP prefixes (Sinan Kaya)

 - Unify slot and bus reset functions and remove hotplug knowledge from
   callers (Sinan Kaya)

 - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
   fix guest reboot issues (Alex Williamson)

 - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD
   Controller (Bjorn Helgaas)

 - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt)

 - Remove Aardvark outbound window configuration (Evan Wang)

 - Fix Aardvark bridge window sizing issue (Zachary Zhang)

 - Convert Aardvark to use pci_host_probe() to reduce code duplication
   (Thomas Petazzoni)

 - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas)

 - Add Cadence support for optional generic PHYs (Alan Douglas)

 - Add Cadence power management ops (Alan Douglas)

 - Remove redundant variable from Cadence driver (Colin Ian King)

 - Add Kirin MSI support (Xiaowei Song)

 - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone,
   armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn
   Guo)

 - Move link notification settings from DesignWare core to individual
   drivers (Gustavo Pimentel)

 - Add endpoint library MSI-X interfaces (Gustavo Pimentel)

 - Correct signature of endpoint library IRQ interfaces (Gustavo
   Pimentel)

 - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel)

 - Add endpoint library MSI-X test support (Gustavo Pimentel)

 - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation
   (Jia-Ju Bai)

 - Add more devices to Broadcom PAXC quirk (Ray Jui)

 - Work around corrupted Broadcom PAXC config space to enable SMMU and
   GICv3 ITS (Ray Jui)

 - Disable MSI parsing to work around broken Broadcom PAXC logic in some
   devices (Ray Jui)

 - Hide unconfigured functions to work around a Broadcom PAXC defect
   (Ray Jui)

 - Lower iproc log level to reduce console output during boot (Ray Jui)

 - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi)

 - Fix mobiveil missing include file (Lorenzo Pieralisi)

 - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi)

 - Fix mvebu I/O space remapping issues (Thomas Petazzoni)

 - Use generic pci_host_bridge in mvebu instead of ARM-specific API
   (Thomas Petazzoni)

 - Whitelist VMD devices with fast interrupt handlers to avoid sharing
   vectors with slow handlers (Keith Busch)

* tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits)
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI: Limit config space size for Netronome NFP5000
  PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips
  PCI/VPD: Check for VPD access completion before checking for timeout
  PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry
  PCI: Match Root Port's MPS to endpoint's MPSS as necessary
  PCI: Skip MPS logic for Virtual Functions (VFs)
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Check for PCIe Link downtraining
  PCI: Add ACS Redirect disable quirk for Intel Sunrise Point
  PCI: Add device-specific ACS Redirect disable infrastructure
  PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE
  PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support
  PCI: Allow specifying devices using a base bus and path of devfns
  PCI: Make specifying PCI devices in kernel parameters reusable
  PCI: Hide ACS quirk declarations inside PCI core
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers()
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-08-16T05:06:26+00:00

Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx,
  hisi_sas, smartpqi, megaraid_sas, arcmsr.

  In addition, with the continuing absence of Nic we have target updates
  for tcmu and target core (all with reviews and acks).

  The biggest observable change is going to be that we're (again) trying
  to switch to mulitqueue as the default (a user can still override the
  setting on the kernel command line).

  Other major core stuff is the removal of the remaining Microchannel
  drivers, an update of the internal timers and some reworks of
  completion and result handling"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue
  scsi: ufs: remove unnecessary query(DM) UPIU trace
  scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done()
  scsi: aacraid: Spelling fix in comment
  scsi: mpt3sas: Fix calltrace observed while running IO & reset
  scsi: aic94xx: fix an error code in aic94xx_init()
  scsi: st: remove redundant pointer STbuffer
  scsi: qla2xxx: Update driver version to 10.00.00.08-k
  scsi: qla2xxx: Migrate NVME N2N handling into state machine
  scsi: qla2xxx: Save frame payload size from ICB
  scsi: qla2xxx: Fix stalled relogin
  scsi: qla2xxx: Fix race between switch cmd completion and timeout
  scsi: qla2xxx: Fix Management Server NPort handle reservation logic
  scsi: qla2xxx: Flush mailbox commands on chip reset
  scsi: qla2xxx: Fix unintended Logout
  scsi: qla2xxx: Fix session state stuck in Get Port DB
  scsi: qla2xxx: Fix redundant fc_rport registration
  scsi: qla2xxx: Silent erroneous message
  scsi: qla2xxx: Prevent sysfs access when chip is down
  scsi: qla2xxx: Add longer window for chip reset
  ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-08-15T22:04:25+00:00

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

RDMA/hns: Fix usage of bitmap allocation functions return values

2018-08-15T21:08:35+00:00

hns bitmap allocation functions return 0 on success and -1 on failure.
Callers of these functions wrongly used their return value as an errno,
fix that by making a proper conversion.

Fixes: a598c6f4c5a8 ("IB/hns: Simplify function of pd alloc and qp alloc")
Signed-off-by: Gal Pressman 
Acked-by: Lijun Ou 
Signed-off-by: Jason Gunthorpe