linux.git/drivers/infiniband/ulp, branch v6.2-rc7

RDMA/srp: Move large values to a new enum for gcc13

2022-12-29T07:07:58+00:00

Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
  SRP_TAG_NO_REQ        = ~0U,
  SRP_TAG_TSK_MGMT	= 1U << 31
all other members are unsigned ints.

Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
  drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'

  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
  drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'

So move the large values away to a separate enum, so that they don't
affect other members.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113

Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org
Signed-off-by: Jiri Slaby (SUSE) 
Reviewed-by: Bart Van Assche 
Signed-off-by: Leon Romanovsky

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2022-12-14T17:27:13+00:00

Pull rdma updates from Jason Gunthorpe:
 "Usual size of updates, a new driver, and most of the bulk focusing on
  rxe:

   - Usual typos, style, and language updates

   - Driver updates for mlx5, irdma, siw, rts, srp, hfi1, hns, erdma,
     mlx4, srp

   - Lots of RXE updates:
      * Improve reply error handling for bad MR operations
      * Code tidying
      * Debug printing uses common loggers
      * Remove half implemented RD related stuff
      * Support IBA's recently defined Atomic Write and Flush operations

   - erdma support for atomic operations

   - New driver 'mana' for Ethernet HW available in Azure VMs. This
     driver only supports DPDK"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (122 commits)
  IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces
  RDMA: Add missed netdev_put() for the netdevice_tracker
  RDMA/rxe: Enable RDMA FLUSH capability for rxe device
  RDMA/cm: Make QP FLUSHABLE for supported device
  RDMA/rxe: Implement flush completion
  RDMA/rxe: Implement flush execution in responder side
  RDMA/rxe: Implement RC RDMA FLUSH service in requester side
  RDMA/rxe: Extend rxe packet format to support flush
  RDMA/rxe: Allow registering persistent flag for pmem MR only
  RDMA/rxe: Extend rxe user ABI to support flush
  RDMA: Extend RDMA kernel verbs ABI to support flush
  RDMA: Extend RDMA user ABI to support flush
  RDMA/rxe: Fix incorrect responder length checking
  RDMA/rxe: Fix oops with zero length reads
  RDMA/mlx5: Remove not-used IB_FLOW_SPEC_IB define
  RDMA/hns: Fix XRC caps on HIP08
  RDMA/hns: Fix error code of CMD
  RDMA/hns: Fix page size cap from firmware
  RDMA/hns: Fix PBL page MTR find
  RDMA/hns: Fix AH attr queried by query_qp
  ...

Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2022-12-13T02:29:54+00:00

Pull iov_iter updates from Al Viro:
 "iov_iter work; most of that is about getting rid of direction
  misannotations and (hopefully) preventing more of the same for the
  future"

* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  use less confusing names for iov_iter direction initializers
  iov_iter: saner checks for attempt to copy to/from iterator
  [xen] fix "direction" argument of iov_iter_kvec()
  [vhost] fix 'direction' argument of iov_iter_{init,bvec}()
  [target] fix iov_iter_bvec() "direction" argument
  [s390] memcpy_real(): WRITE is "data source", not destination...
  [s390] zcore: WRITE is "data source", not destination...
  [infiniband] READ is "data destination", not source...
  [fsi] WRITE is "data source", not destination...
  [s390] copy_oldmem_kernel() - WRITE is "data source", not destination
  csum_and_copy_to_iter(): handle ITER_DISCARD
  get rid of unlikely() on page_copy_sane() calls

IB/IPoIB: Fix queue count inconsistency for PKEY child interfaces

2022-12-11T09:04:19+00:00

There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net//create_child.
2) Using netlink with iproute.

While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).

This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.

Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea 
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky

RDMA/srp: Fix error return code in srp_parse_options()

2022-12-04T13:26:58+00:00

In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.

Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen 
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche 
Signed-off-by: Leon Romanovsky

use less confusing names for iov_iter direction initializers

2022-11-25T18:01:55+00:00

READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.

Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...

Signed-off-by: Al Viro

[infiniband] READ is "data destination", not source...

2022-11-25T18:01:20+00:00

Signed-off-by: Al Viro

IB/isert: use the ISCSI_LOGIN_CURRENT_STAGE macro

2022-11-21T18:49:21+00:00

Use the proper macro to get the current_stage value.

Link: https://lore.kernel.org/r/20221116094535.138298-1-mlombard@redhat.com
Signed-off-by: Maurizio Lombardi 
Reviewed-by: Mike Christie 
Acked-by: Sagi Grimberg 
Signed-off-by: Jason Gunthorpe

treewide: use get_random_u32_below() instead of deprecated function

2022-11-18T01:15:15+00:00

This is a simple mechanical transformation done by:

@@
expression E;
@@
- prandom_u32_max
+ get_random_u32_below
  (E)

Reviewed-by: Kees Cook 
Reviewed-by: Greg Kroah-Hartman 
Acked-by: Darrick J. Wong  # for xfs
Reviewed-by: SeongJae Park  # for damon
Reviewed-by: Jason Gunthorpe  # for infiniband
Reviewed-by: Russell King (Oracle)  # for arm
Acked-by: Ulf Hansson  # for mmc
Signed-off-by: Jason A. Donenfeld

RDMA/rtrs-srv: Remove kobject_del from rtrs_srv_destroy_once_sysfs_root_folders

2022-11-17T11:47:28+00:00

The kobj_paths which is created dynamically by kobject_create_and_add,
and per the comment above kobject_create_and_add, we only need to call
kobject_put which is not same as other kobjs such as stats->kobj_stats
and srv_path->kobj.

Acked-by: Md Haris Iqbal 
Signed-off-by: Guoqing Jiang 
Link: https://lore.kernel.org/r/20221117101945.6317-9-guoqing.jiang@linux.dev
Signed-off-by: Leon Romanovsky