linux.git/drivers/infiniband/ulp, branch v4.7-rc2 Linux kernel source tree Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending 2016-05-28T19:04:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-28T19:04:17+00:00 9ba55cf7cfbfd12a7e914d0d55b7581e896b3f0d Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target pending updates for v4.7-rc1. The highlights this round include: - Allow external PR/ALUA metadata path be defined at runtime via top level configfs attribute (Lee) - Fix target session shutdown bug for ib_srpt multi-channel (hch) - Make TFO close_session() and shutdown_session() optional (hch) - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref (hch) - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence) - Refactor iscsi-target RX/TX PDU encode/decode into common code (Varun) - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu, validate_parameters, and get_r2t_ttt for generic ISO offload (Varun) - Initial merge of cxgb iscsi-segment offload target driver (Varun) The bulk of the changes are Chelsio's new driver, along with a number of iscsi-target common code improvements made by Varun + Co along the way" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits) iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute iscsi-target: Convert transport drivers to signal rdma_shutdown iscsi-target: Make iscsi_tpg_np driver show/store use generic code tcm_qla2xxx Add SCSI command jammer/discard capability iscsi-target: graceful disconnect on invalid mapping to iovec target: need_to_release is always false, remove redundant check and kfree target: remove sess_kref and ->shutdown_session iscsi-target: remove usage of ->shutdown_session tcm_qla2xxx: introduce a private sess_kref target: make close_session optional target: make ->shutdown_session optional target: remove acl_stop target: consolidate and fix session shutdown cxgbit: add files for cxgbit.ko iscsi-target: export symbols iscsi-target: call complete on conn_logout_comp iscsi-target: clear tx_thread_active iscsi-target: add new offload transport type iscsi-target: use conn_transport->transport_type in text rsp ... 
Pull SCSI target updates from Nicholas Bellinger:
 "Here are the outstanding target pending updates for v4.7-rc1.

  The highlights this round include:

   - Allow external PR/ALUA metadata path be defined at runtime via top
     level configfs attribute (Lee)
   - Fix target session shutdown bug for ib_srpt multi-channel (hch)
   - Make TFO close_session() and shutdown_session() optional (hch)
   - Drop se_sess->sess_kref + convert tcm_qla2xxx to internal kref
     (hch)
   - Add tcm_qla2xxx endpoint attribute for basic FC jammer (Laurence)
   - Refactor iscsi-target RX/TX PDU encode/decode into common code
     (Varun)
   - Extend iscsit_transport with xmit_pdu, release_cmd, get_rx_pdu,
     validate_parameters, and get_r2t_ttt for generic ISO offload
     (Varun)
   - Initial merge of cxgb iscsi-segment offload target driver (Varun)

  The bulk of the changes are Chelsio's new driver, along with a number
  of iscsi-target common code improvements made by Varun + Co along the
  way"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (29 commits)
  iscsi-target: Fix early sk_data_ready LOGIN_FLAGS_READY race
  cxgbit: Use type ISCSI_CXGBIT + cxgbit tpg_np attribute
  iscsi-target: Convert transport drivers to signal rdma_shutdown
  iscsi-target: Make iscsi_tpg_np driver show/store use generic code
  tcm_qla2xxx Add SCSI command jammer/discard capability
  iscsi-target: graceful disconnect on invalid mapping to iovec
  target: need_to_release is always false, remove redundant check and kfree
  target: remove sess_kref and ->shutdown_session
  iscsi-target: remove usage of ->shutdown_session
  tcm_qla2xxx: introduce a private sess_kref
  target: make close_session optional
  target: make ->shutdown_session optional
  target: remove acl_stop
  target: consolidate and fix session shutdown
  cxgbit: add files for cxgbit.ko
  iscsi-target: export symbols
  iscsi-target: call complete on conn_logout_comp
  iscsi-target: clear tx_thread_active
  iscsi-target: add new offload transport type
  iscsi-target: use conn_transport->transport_type in text rsp
  ...
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma 2016-05-28T18:04:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-28T18:04:16+00:00 1cbe06c3cf542d48eb22180163e00f91760ef8cd Pull more rdma updates from Doug Ledford: "This is the second group of code for the 4.7 merge window. It looks large, but only in one sense. I'll get to that in a minute. The list of changes here breaks down as follows: - Dynamic counter infrastructure in the IB drivers This is a sysfs based code to allow free form access to the hardware counters RDMA devices might support so drivers don't need to code this up repeatedly themselves - SendOnlyFullMember multicast support - IB router support - A couple misc fixes - The big item on the list: hfi1 driver updates, plus moving the hfi1 driver out of staging There was a group of 15 patches in the hfi1 list that I thought I had in the first pull request but they weren't. So that added to the length of the hfi1 section here. As far as these go, everything but the hfi1 is pretty straight forward. The hfi1 is, if you recall, the driver that Al had complaints about how it used the write/writev interfaces in an overloaded fashion. The write portion of their interface behaved like the write handler in the IB stack proper and did bi-directional communications. The writev interface, on the other hand, only accepts SDMA request structures. The completions for those structures are sent back via an entirely different event mechanism. With the security patch, we put security checks on the write interface, however, we also knew they would be going away soon. Now, we've converted the write handler in the hfi1 driver to use ioctls from the IB reserved magic area for its bidirectional communications. With that change, Intel has addressed all of the items originally on their TODO when they went into staging (as well as many items added to the list later). As such, I moved them out, and since they were the last item in the staging/rdma directory, and I don't have immediate plans to use the staging area again, I removed the staging/rdma area. Because of the move out of staging, as well as a series of 5 patches in the hfi1 driver that removed code people thought should be done in a different way and was optional to begin with (a snoop debug interface, an eeprom driver for an eeprom connected directory to their hfi1 chip and not via an i2c bus, and a few other things like that), the line count, especially the removal count, is high" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits) staging/rdma: Remove the entire rdma subdirectory of staging IB/core: Make device counter infrastructure dynamic IB/hfi1: Fix pio map initialization IB/hfi1: Correct 8051 link parameter settings IB/hfi1: Update pkey table properly after link down or FM start IB/rdamvt: Fix rdmavt s_ack_queue sizing IB/rdmavt: Max atomic value should be a u8 IB/hfi1: Fix hard lockup due to not using save/restore spin lock IB/hfi1: Add tracing support for send with invalidate opcode IB/hfi1, qib: Add ieth to the packet header definitions IB/hfi1: Move driver out of staging IB/hfi1: Do not free hfi1 cdev parent structure early IB/hfi1: Add trace message in user IOCTL handling IB/hfi1: Remove write(), use ioctl() for user cmds IB/hfi1: Add ioctl() interface for user commands IB/hfi1: Remove unused user command IB/hfi1: Remove snoop/diag interface IB/hfi1: Remove EPROM functionality from data device IB/hfi1: Remove UI char device IB/hfi1: Remove multiple device cdev ... 
Pull more rdma updates from Doug Ledford:
 "This is the second group of code for the 4.7 merge window.  It looks
  large, but only in one sense.  I'll get to that in a minute.  The list
  of changes here breaks down as follows:

   - Dynamic counter infrastructure in the IB drivers

     This is a sysfs based code to allow free form access to the
     hardware counters RDMA devices might support so drivers don't need
     to code this up repeatedly themselves

   - SendOnlyFullMember multicast support

   - IB router support

   - A couple misc fixes

   - The big item on the list: hfi1 driver updates, plus moving the hfi1
     driver out of staging

  There was a group of 15 patches in the hfi1 list that I thought I had
  in the first pull request but they weren't.  So that added to the
  length of the hfi1 section here.

  As far as these go, everything but the hfi1 is pretty straight
  forward.

  The hfi1 is, if you recall, the driver that Al had complaints about
  how it used the write/writev interfaces in an overloaded fashion.  The
  write portion of their interface behaved like the write handler in the
  IB stack proper and did bi-directional communications.  The writev
  interface, on the other hand, only accepts SDMA request structures.
  The completions for those structures are sent back via an entirely
  different event mechanism.

  With the security patch, we put security checks on the write
  interface, however, we also knew they would be going away soon.  Now,
  we've converted the write handler in the hfi1 driver to use ioctls
  from the IB reserved magic area for its bidirectional communications.
  With that change, Intel has addressed all of the items originally on
  their TODO when they went into staging (as well as many items added to
  the list later).

  As such, I moved them out, and since they were the last item in the
  staging/rdma directory, and I don't have immediate plans to use the
  staging area again, I removed the staging/rdma area.

  Because of the move out of staging, as well as a series of 5 patches
  in the hfi1 driver that removed code people thought should be done in
  a different way and was optional to begin with (a snoop debug
  interface, an eeprom driver for an eeprom connected directory to their
  hfi1 chip and not via an i2c bus, and a few other things like that),
  the line count, especially the removal count, is high"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (56 commits)
  staging/rdma: Remove the entire rdma subdirectory of staging
  IB/core: Make device counter infrastructure dynamic
  IB/hfi1: Fix pio map initialization
  IB/hfi1: Correct 8051 link parameter settings
  IB/hfi1: Update pkey table properly after link down or FM start
  IB/rdamvt: Fix rdmavt s_ack_queue sizing
  IB/rdmavt: Max atomic value should be a u8
  IB/hfi1: Fix hard lockup due to not using save/restore spin lock
  IB/hfi1: Add tracing support for send with invalidate opcode
  IB/hfi1, qib: Add ieth to the packet header definitions
  IB/hfi1: Move driver out of staging
  IB/hfi1: Do not free hfi1 cdev parent structure early
  IB/hfi1: Add trace message in user IOCTL handling
  IB/hfi1: Remove write(), use ioctl() for user cmds
  IB/hfi1: Add ioctl() interface for user commands
  IB/hfi1: Remove unused user command
  IB/hfi1: Remove snoop/diag interface
  IB/hfi1: Remove EPROM functionality from data device
  IB/hfi1: Remove UI char device
  IB/hfi1: Remove multiple device cdev
  ...
IB/IPoIB: Allow setting the device address 2016-05-25T19:39:03+00:00 Mark Bloch markb@mellanox.com 2016-05-18T13:42:43+00:00 492a7e67ff83fc59adb768de25ccaecd33d46beb In IB networks, and specifically in IPoIB/rdmacm traffic, the device address of an IPoIB interface is used as a means to exchange information between nodes needed for communication. Currently an IPoIB interface will always be created with a device address based on its node GUID without a way to change that. This change adds the ability to set the device address of an IPoIB interface by value. We use the set mac address ndo to do that. The flow should be broken down to two: 1) The GID value is already in the GID table, in this case the interface will be able to set carrier up. 2) The GID value is not yet in the GID table, in this case the interface won't try to join the multicast group and will wait (listen on GID_CHANGE event) until the GID is inserted. In order to track those changes, we add a new flag: * IPOIB_FLAG_DEV_ADDR_SET. When set, it means the dev_addr is a based on a value in the gid table. this bit will be cleared upon a dev_addr change triggered by the user and set after validation. Per IB spec the port GUID can't change if the module is loaded. port GUID is the basis for GID at index 0 which is the basis for the default device address of a ipoib interface. The issue is that there are devices that don't follow the spec, they change the port GUID while HCA is powered on, so in order not to break userspace applications. We need to check if the user wanted to control the device address and we assume that if he sets the device address back to be based on GID index 0, he no longer wishs to control it. In order to track this, we add an additional flag: * IPOIB_FLAG_DEV_ADDR_CTRL When setting the device address, there is no validation of the upper twelve bytes of the device address (flags, qpn, subnet prefix) as those bytes are not under the control of the user. Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> 
In IB networks, and specifically in IPoIB/rdmacm traffic, the device
address of an IPoIB interface is used as a means to exchange information
between nodes needed for communication.

Currently an IPoIB interface will always be created with a device
address based on its node GUID without a way to change that.

This change adds the ability to set the device address of an IPoIB
interface by value. We use the set mac address ndo to do that.

The flow should be broken down to two:
1) The GID value is already in the GID table,
   in this case the interface will be able to set carrier up.

2) The GID value is not yet in the GID table,
   in this case the interface won't try to join the multicast group
   and will wait (listen on GID_CHANGE event) until the GID is inserted.

In order to track those changes, we add a new flag:
* IPOIB_FLAG_DEV_ADDR_SET.

When set, it means the dev_addr is a based on a value in the gid
table. this bit will be cleared upon a dev_addr change triggered
by the user and set after validation.

Per IB spec the port GUID can't change if the module is loaded.
port GUID is the basis for GID at index 0 which is the basis for
the default device address of a ipoib interface.

The issue is that there are devices that don't follow the spec,
they change the port GUID while HCA is powered on, so in order
not to break userspace applications. We need to check if the
user wanted to control the device address and we assume that
if he sets the device address back to be based on GID index 0,
he no longer wishs to control it.

In order to track this, we add an additional flag:
* IPOIB_FLAG_DEV_ADDR_CTRL

When setting the device address, there is no validation of the upper
twelve bytes of the device address (flags, qpn, subnet prefix) as those
bytes are not under the control of the user.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/ipoib: Support SendOnlyFullMember MCG for SendOnly join 2016-05-25T19:39:03+00:00 Erez Shitrit erezsh@mellanox.com 2016-05-25T19:02:07+00:00 3b56113016400a4e2b9870c368ebb8080cb5739b Check (via an SA query) if the SM supports the new option for SendOnly multicast joins. If the SM supports that option it will use the new join state to create such multicast group. If SendOnlyFullMember is supported, we wouldn't use faked FullMember state join for SendOnly MCG, use the correct state if supported. This check is performed at every invocation of mcast_restart task, to be sure that the driver stays in sync with the current state of the SM. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 
Check (via an SA query) if the SM supports the new option for SendOnly
multicast joins.
If the SM supports that option it will use the new join state to create
such multicast group.
If SendOnlyFullMember is supported, we wouldn't use faked FullMember state
join for SendOnly MCG, use the correct state if supported.

This check is performed at every invocation of mcast_restart task, to be
sure that the driver stays in sync with the current state of the SM.

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/core: Introduce capabilitymask2 field in ClassPortInfo mad 2016-05-25T19:39:02+00:00 Erez Shitrit erezsh@mellanox.com 2016-05-25T19:02:04+00:00 507f6afa3ab6c9473d81c8091be0d1b859509a6d Change struct ib_class_port_info to conform to IB Spec 1.3 That in order to get specific capability mask from ClassPortInfo mad. >From the IB Spec, ClassPortInfo section: "CapabilityMask2 Bits 0-26: Additional class-specific capabilities... RespTimeValue the rest 5 bits" The new struct now has one field for capabilitymask2 (previously was the reserved field) and the resp_time field. And it fixes up qib and srpt, use of the field repurposed to be used as capabilitymask2: IB/qib: Change pma_get_classportinfo IB/srpt: Adjust the use of ib_class_port_info Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> 
Change struct ib_class_port_info to conform to IB Spec 1.3
That in order to get specific capability mask from ClassPortInfo mad.

>From the IB Spec, ClassPortInfo section:
        "CapabilityMask2 Bits 0-26: Additional class-specific capabilities...
         RespTimeValue the rest 5 bits"

The new struct now has one field for capabilitymask2 (previously was the
reserved field) and the resp_time field.

And it fixes up qib and srpt, use of the field repurposed to be used as
capabilitymask2:
IB/qib: Change pma_get_classportinfo
IB/srpt: Adjust the use of ib_class_port_info

Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma 2016-05-20T21:35:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-20T21:35:07+00:00 76b584d3125a1f7d8b64e9c522a4555bc2844bde Pull rdma updates from Doug Ledford: "Primary 4.7 merge window changes - Updates to the new Intel X722 iWARP driver - Updates to the hfi1 driver - Fixes for the iw_cxgb4 driver - Misc core fixes - Generic RDMA READ/WRITE API addition - SRP updates - Misc ipoib updates - Minor mlx5 updates" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (148 commits) IB/mlx5: Fire the CQ completion handler from tasklet net/mlx5_core: Use tasklet for user-space CQ completion events IB/core: Do not require CAP_NET_ADMIN for packet sniffing IB/mlx4: Fix unaligned access in send_reply_to_slave IB/mlx5: Report Scatter FCS device capability when supported IB/mlx5: Add Scatter FCS support for Raw Packet QP IB/core: Add Scatter FCS create flag IB/core: Add Raw Scatter FCS device capability IB/core: Add extended device capability flags i40iw: pass hw_stats by reference rather than by value i40iw: Remove unnecessary synchronize_irq() before free_irq() i40iw: constify i40iw_vf_cqp_ops structure IB/mlx5: Add UARs write-combining and non-cached mapping IB/mlx5: Allow mapping the free running counter on PROT_EXEC IB/mlx4: Use list_for_each_entry_safe IB/SA: Use correct free function IB/core: Fix a potential array overrun in CMA and SA agent IB/core: Remove unnecessary check in ibnl_rcv_msg IB/IWPM: Fix a potential skb leak RDMA/nes: replace custom print_hex_dump() ... 
Pull rdma updates from Doug Ledford:
 "Primary 4.7 merge window changes

   - Updates to the new Intel X722 iWARP driver
   - Updates to the hfi1 driver
   - Fixes for the iw_cxgb4 driver
   - Misc core fixes
   - Generic RDMA READ/WRITE API addition
   - SRP updates
   - Misc ipoib updates
   - Minor mlx5 updates"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (148 commits)
  IB/mlx5: Fire the CQ completion handler from tasklet
  net/mlx5_core: Use tasklet for user-space CQ completion events
  IB/core: Do not require CAP_NET_ADMIN for packet sniffing
  IB/mlx4: Fix unaligned access in send_reply_to_slave
  IB/mlx5: Report Scatter FCS device capability when supported
  IB/mlx5: Add Scatter FCS support for Raw Packet QP
  IB/core: Add Scatter FCS create flag
  IB/core: Add Raw Scatter FCS device capability
  IB/core: Add extended device capability flags
  i40iw: pass hw_stats by reference rather than by value
  i40iw: Remove unnecessary synchronize_irq() before free_irq()
  i40iw: constify i40iw_vf_cqp_ops structure
  IB/mlx5: Add UARs write-combining and non-cached mapping
  IB/mlx5: Allow mapping the free running counter on PROT_EXEC
  IB/mlx4: Use list_for_each_entry_safe
  IB/SA: Use correct free function
  IB/core: Fix a potential array overrun in CMA and SA agent
  IB/core: Remove unnecessary check in ibnl_rcv_msg
  IB/IWPM: Fix a potential skb leak
  RDMA/nes: replace custom print_hex_dump()
  ...
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2016-05-18T23:38:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2016-05-18T23:38:59+00:00 675e0655c12209ba1f40af0dff7cd76b17a1315c Pull SCSI updates from James Bottomley: "First round of SCSI updates for the 4.6+ merge window. This batch includes the usual quota of driver updates (bnx2fc, mp3sas, hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas). There's also a multiqueue update for scsi_debug, assorted bug fixes and a few other minor updates (refactor of scsi_sg_pools into generic code, alua and VPD updates, and struct timeval conversions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs mpt3sas: Set maximum transfer length per IO to 4MB for VDs mpt3sas: Updating mpt3sas driver version to 13.100.00.00 mpt3sas: Fix initial Reference tag field for 4K PI drives. mpt3sas: Handle active cable exception event mpt3sas: Update MPI header to 2.00.42 Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy" eata_pio: missing break statement hpsa: Fix type ZBC conditional checks scsi_lib: Decode T10 vendor IDs scsi_dh_alua: do not fail for unknown VPD identification scsi_debug: use locally assigned naa scsi_debug: uuid for lu name scsi_debug: vpd and mode page work scsi_debug: add multiple queue support bfa: fix bfa_fcb_itnim_alloc() error handling megaraid_sas: Downgrade two success messages to info cxlflash: Fix to resolve dead-lock during EEH recovery scsi_debug: rework resp_report_luns scsi_debug: use pdt constants ... 
Pull SCSI updates from James Bottomley:
 "First round of SCSI updates for the 4.6+ merge window.

  This batch includes the usual quota of driver updates (bnx2fc, mp3sas,
  hpsa, ncr5380, lpfc, hisi_sas, snic, aacraid, megaraid_sas).  There's
  also a multiqueue update for scsi_debug, assorted bug fixes and a few
  other minor updates (refactor of scsi_sg_pools into generic code, alua
  and VPD updates, and struct timeval conversions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits)
  mpt3sas: Used "synchronize_irq()"API to synchronize timed-out IO & TMs
  mpt3sas: Set maximum transfer length per IO to 4MB for VDs
  mpt3sas: Updating mpt3sas driver version to 13.100.00.00
  mpt3sas: Fix initial Reference tag field for 4K PI drives.
  mpt3sas: Handle active cable exception event
  mpt3sas: Update MPI header to 2.00.42
  Revert "lpfc: Delete unnecessary checks before the function call mempool_destroy"
  eata_pio: missing break statement
  hpsa: Fix type ZBC conditional checks
  scsi_lib: Decode T10 vendor IDs
  scsi_dh_alua: do not fail for unknown VPD identification
  scsi_debug: use locally assigned naa
  scsi_debug: uuid for lu name
  scsi_debug: vpd and mode page work
  scsi_debug: add multiple queue support
  bfa: fix bfa_fcb_itnim_alloc() error handling
  megaraid_sas: Downgrade two success messages to info
  cxlflash: Fix to resolve dead-lock during EEH recovery
  scsi_debug: rework resp_report_luns
  scsi_debug: use pdt constants
  ...
iscsi-target: Convert transport drivers to signal rdma_shutdown 2016-05-17T05:23:33+00:00 Nicholas Bellinger nab@linux-iscsi.org 2016-05-15T05:23:34+00:00 bd027d856d3d7260017d0dc932201ce5fd7561f9 Instead of special casing the handful of callers that check for iser-target rdma verbs specific shutdown, use a simple flag at iscsit_transport->rdma_shutdown so each driver can signal this. Also, update iscsi-target/tcp + cxgbit to rdma_shutdown = false. Cc: Varun Prakash <varun@chelsio.com> Cc: Hariprasad Shenai <hariprasad@chelsio.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> 
Instead of special casing the handful of callers that check for
iser-target rdma verbs specific shutdown, use a simple flag at
iscsit_transport->rdma_shutdown so each driver can signal this.

Also, update iscsi-target/tcp + cxgbit to rdma_shutdown = false.

Cc: Varun Prakash <varun@chelsio.com>
Cc: Hariprasad Shenai <hariprasad@chelsio.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Merge branches 'cxgb4-2', 'i40iw-2', 'ipoib', 'misc-4.7' and 'mlx5-fcs' into k.o/for-4.7 2016-05-13T23:40:38+00:00 Doug Ledford dledford@redhat.com 2016-05-13T23:40:38+00:00 0651ec932afffce6547efb3e0352e5d229273962 






IB/srp: Fix a debug kernel crash
2016-05-13T23:39:59+00:00

Bart Van Assche
bart.vanassche@sandisk.com

2016-04-12T21:39:18+00:00

54f5c9c52d69afa55abf2b034df8d45f588466c3

Avoid that the following BUG() is triggered against a debug
kernel:

kernel BUG at include/linux/scatterlist.h:92!
RIP: 0010:[<ffffffffa0467199>]  [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp]
Call Trace:
 [<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp]
 [<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp]
 [<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180
 [<ffffffff813f8b07>] scsi_request_fn+0x477/0x610
 [<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40
 [<ffffffff81299070>] blk_delay_work+0x20/0x30
 [<ffffffff81071f07>] process_one_work+0x197/0x480
 [<ffffffff81072239>] worker_thread+0x49/0x490
 [<ffffffff810787ea>] kthread+0xea/0x100
 [<ffffffff8159b632>] ret_from_fork+0x22/0x40

Fixes: f7f7aab1a5c0 ("IB/srp: Convert to new registration API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>





Avoid that the following BUG() is triggered against a debug
kernel:

kernel BUG at include/linux/scatterlist.h:92!
RIP: 0010:[<ffffffffa0467199>]  [<ffffffffa0467199>] srp_map_idb+0x199/0x1a0 [ib_srp]
Call Trace:
 [<ffffffffa04685fa>] srp_map_data+0x84a/0x890 [ib_srp]
 [<ffffffffa0469674>] srp_queuecommand+0x1e4/0x610 [ib_srp]
 [<ffffffff813f5a5e>] scsi_dispatch_cmd+0x9e/0x180
 [<ffffffff813f8b07>] scsi_request_fn+0x477/0x610
 [<ffffffff81298ffe>] __blk_run_queue+0x2e/0x40
 [<ffffffff81299070>] blk_delay_work+0x20/0x30
 [<ffffffff81071f07>] process_one_work+0x197/0x480
 [<ffffffff81072239>] worker_thread+0x49/0x490
 [<ffffffff810787ea>] kthread+0xea/0x100
 [<ffffffff8159b632>] ret_from_fork+0x22/0x40

Fixes: f7f7aab1a5c0 ("IB/srp: Convert to new registration API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org> # v4.4+
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>