linux.git/drivers/infiniband/ulp, branch v4.2-rc4

IB/ipoib: Set MTU to max allowed by mode when mode changes

2015-07-14T17:20:13+00:00

When switching between modes (datagram / connected) change the MTU
accordingly.
datagram mode up to 4K, connected mode up to (64K - 0x10).

Signed-off-by: ELi Cohen 
Signed-off-by: Erez Shitrit 
Signed-off-by: Doug Ledford

IB/ipoib: Scatter-Gather support in connected mode

2015-07-14T17:20:13+00:00

By default, IPoIB-CM driver uses 64k MTU. Larger MTU gives better
performance.
This MTU plus overhead puts the memory allocation for IP based packets at
32 4k pages (order 5), which have to be contiguous.
When the system memory under pressure, it was observed that allocating 128k
contiguous physical memory is difficult and causes serious errors (such as
system becomes unusable).

This enhancement resolve the issue by removing the physically contiguous
memory requirement using Scatter/Gather feature that exists in Linux stack.

With this fix Scatter-Gather will be supported also in connected mode.

This change reverts some of the change made in commit e112373fd6aa
("IPoIB/cm: Reduce connected mode TX object size").

The ability to use SG in IPoIB CM is possible because the coupling
between NETIF_F_SG and NETIF_F_CSUM was removed in commit
ec5f06156423 ("net: Kill link between CSUM and SG features.")

Signed-off-by: Yuval Shaia 
Acked-by: Christian Marie 
Signed-off-by: Doug Ledford

IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush

2015-07-14T17:20:12+00:00

__ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep
complains about locking vlan_rwsem twice (see below). Use down_read_nested
instead of down_read to prevent the warning.

 =============================================
 [ INFO: possible recursive locking detected ]
 4.1.0-rc4+ #36 Tainted: G           O
 ---------------------------------------------
 kworker/u20:2/261 is trying to acquire lock:
  (&priv->vlan_rwsem){.+.+..}, at: [] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]

 but task is already holding lock:
  (&priv->vlan_rwsem){.+.+..}, at: [] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&priv->vlan_rwsem);
   lock(&priv->vlan_rwsem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 3 locks held by kworker/u20:2/261:
  #0:  ("%s""ipoib_flush"){.+.+..}, at: [] process_one_work+0x15c/0x760
  #1:  ((&priv->flush_heavy)){+.+...}, at: [] process_one_work+0x15c/0x760
  #2:  (&priv->vlan_rwsem){.+.+..}, at: [] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]

 stack backtrace:
 CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G           O    4.1.0-rc4+ #36
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib]
  ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001
  ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000
  ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790
 Call Trace:
  [] dump_stack+0x4f/0x6f
  [] __lock_acquire+0x741/0x1820
  [] lock_acquire+0xc8/0x240
  [] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
  [] down_read+0x4c/0x70
  [] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
  [] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib]
  [] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib]
  [] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib]
  [] process_one_work+0x201/0x760
  [] ? process_one_work+0x15c/0x760
  [] worker_thread+0x120/0x4d0
  [] ? process_one_work+0x760/0x760
  [] ? process_one_work+0x760/0x760
  [] kthread+0xfe/0x120
  [] ? __init_kthread_worker+0x70/0x70
  [] ret_from_fork+0x42/0x70
  [] ? __init_kthread_worker+0x70/0x70

Signed-off-by: Haggai Eran 
Signed-off-by: Doug Ledford

IB/IPoIB: Fix bad error flow in ipoib_add_port()

2015-07-14T17:20:10+00:00

Error values of ib_query_port() and ib_query_device() weren't propagated
correctly. Because of that, ipoib_add_port() could return NULL value,
which escaped the IS_ERR() check in ipoib_add_one() and we crashed.

Signed-off-by: Amir Vadai 
Signed-off-by: Or Gerlitz 
Reviewed-by: Ira Weiny 
Signed-off-by: Doug Ledford

IB/srp: Avoid using uninitialized variable

2015-07-14T17:20:09+00:00

We might return res which is not initialized. Also
reduce code duplication by exporting srp_parse_tmo so
srp_tmo_set can reuse it.

Detected by Coverity.

Signed-off-by: Sagi Grimberg 
Signed-off-by: Jenny Falkovich 
Reviewed-by: Bart Van Assche 
Signed-off-by: Doug Ledford

IB/srpt: Convert use of __constant_cpu_to_beXX to cpu_to_beXX

2015-07-14T17:20:09+00:00

In little endian cases, the macro cpu_to_be{16,32,64} unfolds to
__swab{16,32,64} which provides special case for constants. In
big endian cases, __constant_cpu_to_be{16,32,64} and
cpu_to_be{16,32,64} expand directly to the same expression. So,
replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64}
with the goal of getting rid of the definitions of
__constant_cpu_to_be{16,32,64} completely.

The Coccinelle semantic patch that performs this transformation
is as follows:

@@expression x;@@

(
- __constant_cpu_to_be16(x)
+ cpu_to_be16(x)
|
- __constant_cpu_to_be32(x)
+ cpu_to_be32(x)
|
- __constant_cpu_to_be64(x)
+ cpu_to_be64(x)
)

Signed-off-by: Vaishali Thakkar 
Reviewed-by: Bart Van Assche 
Signed-off-by: Doug Ledford

IB: Add rdma_cap_ib_switch helper and use where appropriate

2015-07-14T17:20:08+00:00

Persuant to Liran's comments on node_type on linux-rdma
mailing list:

In an effort to reform the RDMA core and ULPs to minimize use of
node_type in struct ib_device, an additional bit is added to
struct ib_device for is_switch (IB switch). This is needed
to be initialized by any IB switch device driver. This is a
NEW requirement on such device drivers which are all
"out of tree".

In addition, an ib_switch helper was added to ib_verbs.h
based on the is_switch device bit rather than node_type
(although those should be consistent).

The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs)
as well as (IPoIB and SRP) ULPs are updated where
appropriate to use this new helper. In some cases,
the helper is now used under the covers of using
rdma_[start end]_port rather than the open coding
previously used.

Reviewed-by: Sean Hefty 
Reviewed-By: Jason Gunthorpe 
Reviewed-by: Ira Weiny 
Tested-by: Ira Weiny 
Signed-off-by: Hal Rosenstock 
Signed-off-by: Doug Ledford

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-07-04T21:13:43+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "It's been a busy development cycle for target-core in a number of
  different areas.

  The fabric API usage for se_node_acl allocation is now within
  target-core code, dropping the external API callers for all fabric
  drivers tree-wide.

  There is a new conversion to RCU hlists for se_node_acl and
  se_portal_group LUN mappings, that turns fast-past LUN lookup into a
  completely lockless code-path.  It also removes the original
  hard-coded limitation of 256 LUNs per fabric endpoint.

  The configfs attributes for backends can now be shared between core
  and driver code, allowing existing drivers to use common code while
  still allowing flexibility for new backend provided attributes.

  The highlights include:

   - Merge sbc_verify_dif_* into common code (sagi)
   - Remove iscsi-target support for obsolete IFMarker/OFMarker
     (Christophe Vu-Brugier)
   - Add bidi support in target/user backend (ilias + vangelis + agover)
   - Move se_node_acl allocation into target-core code (hch)
   - Add crc_t10dif_update common helper (akinobu + mkp)
   - Handle target-core odd SGL mapping for data transfer memory
     (akinobu)
   - Move transport ID handling into target-core (hch)
   - Move task tag into struct se_cmd + support 64-bit tags (bart)
   - Convert se_node_acl->device_list[] to RCU hlist (nab + hch +
     paulmck)
   - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch +
     paulmck)
   - Simplify target backend driver registration (hch)
   - Consolidate + simplify target backend attribute implementations
     (hch + nab)
   - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch)
   - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab)
   - Drop unnecessary core_tpg_register TFO parameter (nab)
   - Use 64-bit LUNs tree-wide (hannes)
   - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits)
  target: Bump core version to v5.0
  target: remove target_core_configfs.h
  target: remove unused TARGET_CORE_CONFIG_ROOT define
  target: consolidate version defines
  target: implement WRITE_SAME with UNMAP bit using ->execute_unmap
  target: simplify UNMAP handling
  target: replace se_cmd->execute_rw with a protocol_data field
  target/user: Fix inconsistent kmap_atomic/kunmap_atomic
  target: Send UA when changing LUN inventory
  target: Send UA upon LUN RESET tmr completion
  target: Send UA on ALUA target port group change
  target: Convert se_lun->lun_deve_lock to normal spinlock
  target: use 'se_dev_entry' when allocating UAs
  target: Remove 'ua_nacl' pointer from se_ua structure
  target_core_alua: Correct UA handling when switching states
  xen-scsiback: Fix compile warning for 64-bit LUN
  target: Remove TARGET_MAX_LUNS_PER_TRANSPORT
  target: use 64-bit LUNs
  target: Drop duplicate + unused se_dev_check_wce
  target: Drop unnecessary core_tpg_register TFO parameter
  ...

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2015-07-01T17:49:25+00:00

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2015-06-23T22:55:44+00:00

Pull SCSI updates from James Bottomley:
"This is the usual grab bag of driver updates (lpfc, hpsa,
megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.

There is also one new driver: the Cisco snic. The advansys driver has
been rewritten to get rid of the warning about converting it to the
DMA API, the tape statistics patch got in and finally, there's a
resuffle of SCSI header files to separate more cleanly initiator from
target mode (and better share the common definitions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
snic: driver for Cisco SCSI HBA
qla2xxx: Fix indentation
qla2xxx: Comment out unreachable code
fusion: remove dead MTRR code
advansys: fix compilation errors and warnings when CONFIG_PCI is not set
mptsas: fix depth param in scsi_track_queue_full
megaraid: fix irq setup process regression
lpfc: Update version to 10.7.0.0 for upstream patch set.
lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
lpfc: Fix scsi task management error message.
lpfc: Fix cq_id masking problem.
lpfc: Fix scsi prep dma buf error.
lpfc: Add support for using block multi-queue
lpfc: Devices are not discovered during takeaway/giveback testing
lpfc: Fix vport deletion failure.
lpfc: Check for active portpeerbeacon.
lpfc: Update driver version for upstream patch set 10.6.0.1.
lpfc: Change buffer pool empty message to miscellaneous category
lpfc: Fix incorrect log message reported for empty FCF record.
lpfc: Fix rport leak.
...