* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors
  kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage
  iscsi-target: Add iSCSI fabric support for target v4.1
  iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h
  iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
  iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch renames the following iscsi_proto.h structures to avoid
namespace issues with drivers/target/iscsi/iscsi_target_core.h:

*) struct iscsi_cmd -> struct iscsi_scsi_req
*) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp
*) struct iscsi_login -> struct iscsi_login_req

This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*,
and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and
fixes the incorrect definition of struct iscsi_snack to following
RFC-3720 Section 10.16. SNACK Request.

Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to
use the updated structure definitions in a handful of locations.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits)
  IB/qib: Defer HCA error events to tasklet
  mlx4_core: Bump the driver version to 1.0
  RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit()
  IB/mlx4: Support PMA counters for IBoE
  IB/mlx4: Use flow counters on IBoE ports
  IB/pma: Add include file for IBA performance counters definitions
  mlx4_core: Add network flow counters
  mlx4_core: Fix location of counter index in QP context struct
  mlx4_core: Read extended capabilities into the flags field
  mlx4_core: Extend capability flags to 64 bits
  IB/mlx4: Generate GID change events in IBoE code
  IB/core: Add GID change event
  RDMA/cma: Don't allow IPoIB port space for IBoE
  RDMA: Allow for NULL .modify_device() and .modify_port() methods
  IB/qib: Update active link width
  IB/qib: Fix potential deadlock with link down interrupt
  IB/qib: Add sysfs interface to read free contexts
  IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP
  IB/qib: Remove double define
  IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP
  ...

dst_{get,set}_neighbour()

Signed-off-by: David S. Miller <davem@davemloft.net>

SCSI scanning of a channel:id:lun triplet in Linux works as follows
(function scsi_scan_target() in drivers/scsi/scsi_scan.c):

- If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target
  and process the result.

- If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN
  corresponding to the specified channel:id:lun triplet to verify
  whether the LUN exists.

So a SCSI driver must either take the channel and target id values in
account in its quecommand() function or it should declare that it only
supports one channel and one target id.

Currently the ib_srp driver does neither.  As a result scanning the
SCSI bus via e.g. rescan-scsi-bus.sh causes many duplicate SCSI
devices to be created. For each 0:0:L device, several duplicates are
created with the same LUN number and with (C:I) != (0:0). Fix this by
declaring that the ib_srp driver only supports one channel and one
target id.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: <stable@kernel.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>

* remove interrupt.g inclusion from netdevice.h -- not needed
* fixup fallout, add interrupt.h and hardirq.h back where needed.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/cma: Save PID of ID's owner
  RDMA/cma: Add support for netlink statistics export
  RDMA/cma: Pass QP type into rdma_create_id()
  RDMA: Update exported headers list
  RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h>
  RDMA/nes: Add a check for strict_strtoul()
  RDMA/cxgb3: Don't post zero-byte read if endpoint is going away
  RDMA/cxgb4: Use completion objects for event blocking
  IB/srp: Fix integer -> pointer cast warnings
  IB: Add devnode methods to cm_class and umad_class
  IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required
  IB/uverbs: Add devnode method to set path/mode
  RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node
  RDMA: Add netlink infrastructure
  RDMA: Add error handling to ib_core_init()

The RDMA CM currently infers the QP type from the port space selected
by the user.  In the future (eg with RDMA_PS_IB or XRC), there may not
be a 1-1 correspondence between port space and QP type.  For netlink
export of RDMA CM state, we want to export the QP type to userspace,
so it is cleaner to explicitly associate a QP type to an ID.

Modify rdma_create_id() to allow the user to specify the QP type, and
use it to make our selections of datagram versus connected mode.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>