linux.git/drivers/iio, branch v6.9-rc2

Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-03-21T20:21:31+00:00

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and a number of other driver
  subsystem updates for 6.9-rc1. Included in here are:

   - IIO driver updates, loads of new ones and evolution of existing ones

   - coresight driver updates

   - const cleanups for many driver subsystems

   - speakup driver additions

   - platform remove callback void cleanups

   - mei driver updates

   - mhi driver updates

   - cdx driver updates for MSI interrupt handling

   - nvmem driver updates

   - other smaller driver updates and cleanups, full details in the
    shortlog

  All of these have been in linux-next for a long time with no reported
  issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
  binder: remove redundant variable page_addr
  uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
  uio_pruss: UIO_MEM_DMA_COHERENT conversion
  cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
  uio: introduce UIO_MEM_DMA_COHERENT type
  cdx: add MSI support for CDX bus
  pps: use cflags-y instead of EXTRA_CFLAGS
  speakup: Add /dev/synthu device
  speakup: Fix 8bit characters from direct synth
  parport: sunbpp: Convert to platform remove callback returning void
  parport: amiga: Convert to platform remove callback returning void
  char: xillybus: Convert to platform remove callback returning void
  vmw_balloon: change maintainership
  MAINTAINERS: change the maintainer for hpilo driver
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
  hpet: remove hpets::hp_clocksource
  platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
  char: xilinx_hwicap: drop casting to void in dev_set_drvdata
  greybus: move is_gb_* functions out of greybus.h
  greybus: Remove usage of the deprecated ida_simple_xx() API
  ...

Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-03-21T19:44:10+00:00

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-03-13T18:07:37+00:00

Pull spi updates from Mark Brown:
 "This release sees some exciting changes from David Lechner which
  implements some optimisations that have been talked about for a long
  time which allows client drivers to pre-prepare SPI messages for
  repeated or low latency use. This lets us move work out of latency
  sensitive paths and avoid repeating work for frequently performed
  operations. As well as being useful in itself this will also be used
  in future to allow controllers to directly trigger SPI operations (eg,
  from interrupts).

  Otherwise this release has mostly been focused on cleanups, plus a
  couple of new devices:

   - Support for pre-optimising messages

   - A big set of updates from Uwe Kleine-König moving drivers to use
     APIs with more modern terminology for controllers

   - Major overhaul of the s3c64xx driver

   - Support for Google GS101 and Samsung Exynos850"

* tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits)
  spi: Introduce SPI_INVALID_CS and is_valid_cs()
  spi: Fix types of the last chip select storage variables
  spi: Consistently use BIT for cs_index_mask
  spi: Exctract spi_dev_check_cs() helper
  spi: Exctract spi_set_all_cs_unused() helper
  spi: s3c64xx: switch exynos850 to new port config data
  spi: s3c64xx: switch gs101 to new port config data
  spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id
  spi: s3c64xx: get rid of the OF alias ID dependency
  spi: s3c64xx: introduce s3c64xx_spi_set_port_id()
  spi: s3c64xx: let the SPI core determine the bus number
  spi: s3c64xx: allow FIFO depth to be determined from the compatible
  spi: s3c64xx: retrieve the FIFO depth from the device tree
  spi: s3c64xx: determine the fifo depth only once
  spi: s3c64xx: allow full FIFO masks
  spi: s3c64xx: define a magic value
  spi: dt-bindings: introduce FIFO depth properties
  spi: axi-spi-engine: use struct_size() macro
  spi: axi-spi-engine: use __counted_by() attribute
  spi: axi-spi-engine: remove p from struct spi_engine_message_state
  ...

iio: proximity: isl29501: make use of of_device_id table

2024-02-28T19:26:38+00:00

Reference the of_device_id table in the driver structure, so it will be
used for module autoloading and device matching.  This fixes clang W=1
warning:

  isl29501.c:999:34: error: unused variable 'isl29501_i2c_matches' [-Werror,-Wunused-const-variable]

Signed-off-by: Krzysztof Kozlowski 
Link: https://lore.kernel.org/r/20240225201654.49450-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron

iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member

2024-02-28T19:26:38+00:00

Drop description of non-existing 'struct pm8xxx_chan_info' member:

  qcom-pm8xxx-xoadc.c:386: warning: Excess struct member 'scale_fn_type' description in 'pm8xxx_chan_info'

Signed-off-by: Krzysztof Kozlowski 
Reviewed-by: Dmitry Baryshkov 
Link: https://lore.kernel.org/r/20240225202744.60500-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron

iio: magnetometer: add a driver for Voltafield AF8133J magnetometer

2024-02-28T19:26:37+00:00

AF8133J is a simple I2C-connected magnetometer, without interrupts.

Add a simple IIO driver for it.

Signed-off-by: Icenowy Zheng 
Signed-off-by: Dalton Durst 
Signed-off-by: Shoji Keita 
Co-developed-by: Ondrej Jirman 
Signed-off-by: Ondrej Jirman 
Reviewed-by: Andrey Skvortsov 
Tested-by: Andrey Skvortsov 
Link: https://lore.kernel.org/r/20240222011341.3232645-4-megi@xff.cz
Signed-off-by: Jonathan Cameron

iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive

2024-02-28T19:26:37+00:00

devm_reset_control_get_optional_exclusive does what this driver is
trying to do in its probe function, therefore let's switch over to that
subsystem function.

Signed-off-by: Quentin Schulz 
Reviewed-by: Heiko Stuebner 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-3-84b06a0f623a@theobroma-systems.com
Signed-off-by: Jonathan Cameron

iio: adc: rockchip_saradc: use mask for write_enable bitfield

2024-02-28T19:26:37+00:00

Some of the registers on the SARADCv2 have bits write protected except
if another bit is set. This is usually done by having the lowest 16 bits
store the data to write and the highest 16 bits specify which of the 16
lowest bits should have their value written to the hardware block.

The write_enable mask for the channel selection was incorrect because it
was just the value shifted by 16 bits, which means it would only ever
write bits and never clear them. So e.g. if someone starts a conversion
on channel 5, the lowest 4 bits would be 0x5, then starts a conversion
on channel 0, it would still be 5.

Instead of shifting the value by 16 as the mask, let's use the OR'ing of
the appropriate masks shifted by 16.

Note that this is not an issue currently because the only SARADCv2
currently supported has a reset defined in its Device Tree, that reset
resets the SARADC controller before starting a conversion on a channel.
However, this reset is handled as optional by the probe function and
thus proper masking should be used in the event an SARADCv2 without a
reset ever makes it upstream.

Fixes: 757953f8ec69 ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz 
Reviewed-by: Heiko Stuebner 
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-2-84b06a0f623a@theobroma-systems.com
Cc: 
Signed-off-by: Jonathan Cameron

iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2

2024-02-28T19:26:37+00:00

The SARADCv2 on RK3588 (the only SoC currently supported that has an
SARADCv2) selects the channel through the channel_sel bitfield which is
the 4 lowest bits, therefore the mask should be GENMASK(3, 0) and not
GENMASK(15, 0).

Fixes: 757953f8ec69 ("iio: adc: rockchip_saradc: Add support for RK3588")
Signed-off-by: Quentin Schulz 
Reviewed-by: Heiko Stuebner 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20240223-saradcv2-chan-mask-v1-1-84b06a0f623a@theobroma-systems.com
Cc: 
Signed-off-by: Jonathan Cameron

iio: adc: adding support for PAC193x

2024-02-28T19:26:37+00:00

This is the iio driver for Microchip
PAC193X series of Power Monitor with Accumulator chip family.

Signed-off-by: Marius Cristea 
Link: https://lore.kernel.org/r/20240222164206.65700-3-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron