The current offset has the scale already applied to it. The ABI
documentation defines the offset parameter as "offset to be added
to <type>[Y]_raw prior to scaling by <type>[Y]_scale in order to
obtain value in the <type> units as specified in <type>[Y]_raw
documentation"

The right value is obtained at 0 degrees Celsius by the formula provided
in the datasheet:

T = Tsens_t0 + (Tadc_t - Tadc_t0) / Tadc_res

where:
T = 0 degrees Celsius
Tsens_t0 (reference temperature) = 25 degrees Celsius
Tadc_t0 (16-bit format for Tsens_t0) = 17508
Tadc_res = 60.1 LSB/degree Celsius

The resulting offset is 16005.5, which has been truncated to 16005 to
provide an integer value with a precision loss smaller than the 1-LSB
measurement precision.

Fix the offset to apply its value prior to scaling.

Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/9879beec-05fc-4fc6-af62-d771e238954e@wolfvision.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Explicity specify array indices to fix mapping between
asahi_compass_chipset and ak_def_array.
While at it, remove unneeded AKXXXX.

Fixes: 4f9ea93afde1 ("iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables")
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001-ak_magnetometer-v1-1-09bf3b8798a3@apitzsch.eu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919174931.1417681-41-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Sort ID table alphabetically by name and ACPI table by HID.

While at it, drop blank line before ID table.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230818075600.24277-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Convert enum->pointer for data in the match tables to simplify the probe()
by replacing device_get_match_data() and i2c_client_get_device_id by
i2c_get_match_data() as we have similar I2C, ACPI and DT matching table.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230818075600.24277-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Simplify the probe() by replacing device_get_match_data() with
i2c_get_match_data().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230812065741.20990-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Jonathan writes:

1st set of IIO new device support, features and cleanup for the 6.5 cycle.

New device support
- honeywell,mprls0025pa
  * New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
  * Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
  * Add support for mlx90615 Infra Red Thermometer after driver cleanup
    and refactoring to support the differences in this device.
- renesas,x9250
  * New driver and bindings for this quad potentiometer.
- rockchip,saradc
  * Add support for RK3588. Also included is a bunch of refactoring and
    cleanup for that driver.
- rohm,bu27008
  * New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
  * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
  * New driver and bindings for this ambient light sensor.

Features
- core
  * Introduce iio_validate_own_trigger() for cases where a driver can only
    consumer a trigger it registered (detected via same parent device).
    Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
  * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
  * Enable asynchronous probe.
- rohm,bu27034
  * Enable asynchronous probe.
- ti,tmp006
  * Explicit support for DT including binding documentation.

Cleanups, minor fixes and misc improvements.
- treewide
  * Switch I2C drivers from probe_new() back to probe() - part of the
    long process of getting rid of a parameter from probe()
  * Various whitespace and typo fixes not otherwise called out.
- core
  * industrialio-buffer,Style cleanup.
  * Add documentation to extend_name field of struct iio_chan_spec to
    direct people using it towards the label infrastructure instead.
    extend_name was a design mistake a long time back so directly people
    away from it may be useful.
- adi,ad7606
  * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
  * Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
  * Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
  * Add DT binding for this part.
- qcom,spmi-vadc
  * Allow for 1/16th prescaling used on a few devices.
  * Various changes to channel labeling and naming, including dropping
    use of fwnode_name which generates odd channel names. Small ABI
    change as a result, but not thought to be a problem for users of this
    platform.
- st,lsm6dsx
  * dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
  * Add a debug print for when legacy channel config is used.
- ti,palmas-adc
  * Drop unused i2c.h include.

* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
  dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
  dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
  iio: adc: rockchip_saradc: Use dev_err_probe
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Add callback functions
  iio: temperature: tmp006: Add OF device matching support
  dt-bindings: iio: temperature: Add support for tmp006
  staging: iio: Switch i2c drivers back to use .probe()
  iio: amplifiers: ad8366 Fix whitespace issue
  iio: imu: inv_icm42600: avoid frequent timestamp jitter
  MAINTAINERS: Add ROHM BU27008
  iio: light: ROHM BU27008 color sensor
  iio: kx022a: Use new iio_validate_own_trigger()
  iio: trigger: Add simple trigger_validation helper
  dt-bindings: iio: light: ROHM BU27008
  iio: mlx90614: Add MLX90615 support
  ...

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230515205048.19561-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The lsm303d has the same register mapping as the lsm9ds0,
thus we can just re-use that.

Tested on a Lenovo Yoga Tablet 2 1051-F.

Signed-off-by: Marius Hoch <mail@mariushoch.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20230415231130.115094-3-mail@mariushoch.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The tmag5273 gets a runtime PM reference before reading a measurement and
releases it when done. But if the measurement fails the tmag5273_read_raw()
function exits before releasing the reference.

Make sure that this error path also releases the runtime PM reference.

Fixes: 866a1389174b ("iio: magnetometer: add ti tmag5273 driver")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>