linux.git/drivers/iio/adc, branch v6.8

iio: adc: ad4130: only set GPIO_CTRL if pin is unused

2024-02-10T16:52:39+00:00

Currently, GPIO_CTRL bits are set even if the pins are used for
measurements.

GPIO_CTRL bits should only be set if the pin is not used for
other functionality.

Fix this by only setting the GPIO_CTRL bits if the pin has no
other function.

Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Cosmin Tanislav 
Reviewed-by: Nuno Sa 
Link: https://lore.kernel.org/r/20240207132007.253768-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad4130: zero-initialize clock init data

2024-02-10T16:52:39+00:00

The clk_init_data struct does not have all its members
initialized, causing issues when trying to expose the internal
clock on the CLK pin.

Fix this by zero-initializing the clk_init_data struct.

Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Cosmin Tanislav 
Reviewed-by: Nuno Sa 
Link: https://lore.kernel.org/r/20240207132007.253768-1-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()

2024-01-22T18:59:07+00:00

There is a copy and paste error so it accidentally returns ->convst_gpio
instead of ->reset_gpio.  Fix it.

Fixes: 0b76ff46c463 ("iio: adc: Add support for AD7091R-8")
Signed-off-by: Dan Carpenter 
Reviewed-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/fd905ad0-6413-489c-9a3b-90c0cdb35ec9@moroto.mountain
Signed-off-by: Jonathan Cameron

Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-01-18T00:47:17+00:00

Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...

iio: adc: Add support for AD7091R-8

2023-12-26T15:43:33+00:00

Add support for Analog Devices AD7091R-2, AD7091R-4, and AD7091R-8
low power 12-Bit SAR ADCs with SPI interface.
Extend ad7091r-base driver so it can be used by the AD7091R-8 driver.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/09d1d1c4b39cecc528488efac6094233715f5659.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: Split AD7091R-5 config symbol

2023-12-26T15:42:45+00:00

Split AD7091R-5 kconfig symbol into one symbol for the base AD7091R driver
and another one for the I2C interface AD7091R-5 driver.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/8cae37c611c1b0fe3faef7a4b8c4cc915eaeddc7.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad7091r: Add chip_info callback to get conversion result channel

2023-12-26T15:42:24+00:00

AD7091R-5 and AD7091R-2/-4/-8 have slightly different register field
layout and due to that require different masks for getting the index of
the channel associated with each read.
Add a callback function so the base driver can get correct channel ID
for each chip variant.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/1f7a40b4839b3a1c3f1a0654a1b329bea870feb6.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad7091r: Set device mode through chip_info callback

2023-12-26T15:42:01+00:00

AD7091R-5 devices have a few modes of operation (sample, command,
autocycle) which are set by writing to configuration register fields.
Follow up patches will add support for AD7091R-2/-4/-8 which don't have
those operation modes nor the register fields for setting them.
Make ad7091r_set_mode() a callback function of AD7091R chip_info struct
so the base driver can appropriately handle each design without having
to check which actual chip is connected.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/5140336980f66c2c45f05895c3b68e2f65fba1c2.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad7091r: Remove unneeded probe parameters

2023-12-26T15:41:36+00:00

With the grouping of ad7091r initialization data and callbacks into the
init_info struct, there is no more need to pass the device name and
register map through probe function parameters as those will be available
in the init_info object.
Remove probe parameters that are not needed anymore.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/090a6b461410a374511a8c73659de28b2665f96b.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron

iio: adc: ad7091r: Move chip init data to container struct

2023-12-26T15:41:11+00:00

AD7091R designs may differ on their communication protocol and resources
required for proper setup. Extract what is design specific into a
init_info struct so the base driver can use data and callback functions
from that struct rather than checking which specific chip is connected
during device initialization.

Signed-off-by: Marcelo Schmitt 
Link: https://lore.kernel.org/r/1aca2261e227474dc58ce26442845947bcde9b14.1703013352.git.marcelo.schmitt1@gmail.com
Signed-off-by: Jonathan Cameron