Jonathan writes:

First set of IIO fixes in the 5.6 cycle.

* adxl372
  - Fix marking of buffered values as big endian.
* ak8974
  - Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
  - Fix differential mode by ensuring configuration set correctly.
* ping
  - Use the write sensor type for of_ping_match table.
* sps30
  - Kconfig build dependency fix.
* st-sensors
  - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
  - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
  - Make sure master mode is disabled when stopping.
* vcnl400
  - Update some sampling periods based on new docs.

* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

This commit fixes the error message:
"BUG: sleeping function called from invalid context at kernel/irq/chip.c"
Suppress the trigger irq handler. Make the buffer transfers directly
in DMA callback, instead.
Push buffers without timestamps, as timestamps are not supported
in DFSDM driver.

Fixes: 11646e81d775 ("iio: adc: stm32-dfsdm: add support for buffer modes")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The differential channels require writing the channel offset register (COR).
Otherwise they do not work in differential mode.
The configuration of COR is missing in triggered mode.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius()
in <linux/units.h>.

Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We want the staging fixes in here as well

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not print an error trace when deferring probe for some resource.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Ad7124 data-sheet specifies that the falling edge
of the DOUT line should be used for an interrupt.
The current irq flag (IRQF_TRIGGER_LOW) used will
cause unwanted behaviour. When enabling the interrupt
it will fire once because the DOUT line is already low.
This will make the driver to read an unfinished conversion
from the chip.

This patch sets the irq type to the one specified in
the data-sheet.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Before this patch the ad_sigma_delta implementation hardcoded
the irq trigger type to low, assuming that all Sigma-Delta ADCs
have the same interrupt-type.

This patch allows all drivers using the ad_sigma_delta layer to set the
irq trigger type to the one specified in the datasheet.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Update sampling rate when oversampling ratio is changed
through the IIO ABI.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Apply data formatting to single conversion,
as this is already done in continuous and trigger modes.

Fixes: 102afde62937 ("iio: adc: stm32-dfsdm: manage data resolution in trigger mode")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Cc: <Stable@vger.kernel.org>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>