From the perspective of most users of recent systems, disabling Host
Protected Area (HPA) can break vendor RAID formats, GPT partitions and
risks corrupting firmware or overwriting vendor system recovery tools.

Unfortunately the original (kernels < 2.6.30) behavior (unconditionally
disabling HPA and using full disk capacity) was introduced at the time
when the main use of HPA was to make the drive look small enough for the
BIOS to allow the system to boot with large capacity drives.

Thus to allow the maximum compatibility with the existing setups (using
HPA and partitioned with HPA disabled) we automically disable HPA if
any partitions overlapping HPA are detected.  Additionally HPA can also
be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0"
to disable HPA on /dev/hda).

v2:
Fix ->resume HPA support.

While at it:
- remove stale "idebus=" entry from Documentation/kernel-parameters.txt

Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Cc: "Andries E. Brouwer" <Andries.Brouwer@cwi.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[patch description was based on input from Alan Cox and Frans Pop]
Emphatically-Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove stale comment from ide.c while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ide_acpi_init() -> ide_acpi_init_port()

* ide_acpi_blacklist() -> ide_acpi_init()

* Call ide_acpi_init() only once (do it during IDE core
  initialization) and cleanup the function accordingly.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Documentation/kernel-parameters.txt
- ide=nodma is no longer valid.

drivers/ide/Kconfig
- The module is ide-core.ko not ide.

drivers/ide/ide.c
- It took me a while to figure out what the arguments %d.%d:%d to nodma
  module parameter ment, so I added a comment to each.
- Added a comment to each of the sscanf lines.
- There is a bug, if j is 0 it would previously clear all the other bits
  except the current device, changed in three different places.
  mask &= (1 << i) should be mask &= ~(1 << i).

Signed-off-by: David Fries <david@fries.net>
[bart: s/disk/device/ in ide.c, beautify patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_port_for_each_dev() / ide_host_for_each_port() iterators
and update IDE code to use them.

While at it:
- s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(),
  ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(),
  ide_acpi_set_state() and scc_dma_end()
- s/d/i/ variable in ide_proc_port_register_devices()

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Allocate device structures dynamically instead of having them embedded
in ide_hwif_t:

* Remove needless zeroing of port structure from ide_init_port_data().

* Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices).

* Add ide_port_{alloc,free}_devices() helpers and use them respectively
  in ide_{host,free}_alloc().

* Convert all users of ->drives[] to use ->devices[] instead.

While at it:

* Use drive->dn for the slave device check in scc_pata.c.

As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting
code size:

   text    data     bss     dec     hex filename
  53963    1244     237   55444    d894 drivers/ide/ide-core.o.before
  52981    1244     237   54462    d4be drivers/ide/ide-core.o.after

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:
- s/struct ide_driver_s/struct ide_driver/
- use to_ide_driver() macro in ide-proc.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move IDE_DEFAULT_MAX_FAILURES to <linux/ide.h>.

* Move ide_cfg_mtx, ide_hwif_to_major[], ide_port_init_devices_data(),
  ide_init_port_data(), ide_init_port_hw() and ide_unregister() to
  ide-probe.c from ide.c.

* Make ide_unregister(), ide_init_port_data(), ide_init_port_hw()
  and ide_cfg_mtx static.

While at it:

* Remove stale ide_init_port_data() documentation and ide_lock extern.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Merge ide_hwgroup_t with ide_hwif_t.

* Cleanup init_irq() accordingly, then remove no longer needed
  ide_remove_port_from_hwgroup() and ide_ports[].

* Remove now unused HWGROUP() macro.

While at it:

* ide_dump_ata_error() fixups

v2:
* Fix ->quirk_list check in do_ide_request()
  (s/hwif->cur_dev/prev_port->cur_dev).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>