linux.git/drivers/ide/ide-probe.c, branch master

ide: remove the legacy ide driver

2021-06-16T14:53:58+00:00

The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while.  Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

2020-12-16T20:57:51+00:00

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...

ide: remove BUG_ON(in_interrupt() || irqs_disabled()) from ide_unregister()

2020-12-15T20:13:36+00:00

In the discussion about preempt count consistency across kernel
configurations:

 https://lore.kernel.org/r/20200914204209.256266093@linutronix.de/

it was concluded that the usage of in_interrupt() and related context
checks should be removed from non-core code.

Both BUG_ON()s in ide-probe.c were introduced in commit
   4015c949fb465 ("[PATCH] update ide core")

when ide_unregister() was extended with semaphore based locking.  Both
checks won't complain about disabled preemption which is also wrong.

The might_sleep() in today's mutex_lock() will complain about the
missuses.

Remove the BUG_ON() statements.

Link: https://lkml.kernel.org/r/20201120092421.1023428-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior 
Acked-by: Jens Axboe 
Cc: "David S. Miller" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ide: switch to __register_blkdev for command set probing

2020-11-16T15:14:30+00:00

ide is the last user of the blk_register_region framework except for the
tracking of allocated gendisk.  Switch to __register_blkdev, even if that
doesn't allow us to trivially find out which command set to probe for.
That means we now always request all modules when a user tries to access
an unclaimed ide device node, but except for a few potentially loaded
modules for a fringe use case of a deprecated and soon to be removed
driver that doesn't make a difference.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

ide: remove ide_{,un}register_region

2020-11-16T15:14:30+00:00

There is no need to ever register the fake gendisk used for ide-tape.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

ide: officially deprecated the legacy IDE driver

2019-05-08T23:47:23+00:00

After a recent chat with Dave we agreed to try to finally kill off the
legacy IDE code base.  Set a two year grace period in which we try
to move everyone over.  There are a few pieces of hardware not
supported by libata yet, but for many of them we aren't even sure
if there are any users.  For those that have users we have usually
found a volunteer to add libata support.

Signed-off-by: Christoph Hellwig 
Acked-by: Jens Axboe 
Signed-off-by: David S. Miller

ide: ensure atapi sense request aren't preempted

2019-01-31T15:25:09+00:00

There's an issue with how sense requests are handled in IDE. If ide-cd
encounters an error, it queues a sense request. With how IDE request
handling is done, this is the next request we need to handle. But it's
impossible to guarantee this, as another request could come in between
the sense being queued, and ->queue_rq() being run and handling it. If
that request ALSO fails, then we attempt to doubly queue the single
sense request we have.

Since we only support one active request at the time, defer request
processing when a sense request is queued.

Fixes: 600335205b8d "ide: convert to blk-mq"
Reported-by: He Zhe 
Tested-by: He Zhe 
Signed-off-by: Jens Axboe

ide: don't clear special on ide_queue_rq() entry

2018-11-13T00:19:32+00:00

We can't use RQF_DONTPREP to see if we should clear ->special,
as someone could have set that while inserting the request. Make
sure we clear it in our ->initialize_rq_fn() helper instead.

Fixes: 22ce0a7ccf23 ("ide: don't use req->special")
Signed-off-by: Jens Axboe