linux.git/drivers/ide/ide-cd.c, branch v2.6.13

[PATCH] quiet ide-cd warning

2005-07-12T23:00:58+00:00

This shuts up a potential uninitialized variable warning.

Signed-off-by: Matt Mackall 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] IDE CD reports current speed

2005-06-23T16:45:35+00:00

The current ide-cd driver reports the CDROM speed (as found in
/proc/sys/dev/cdrom/info) as the current speed when loading the driver.
Changing the speed of the cdrom drive (by "eject -x" for instance) doesn't
update the speed reported by the kernel.  Updating the info could be
valuable for the user as it's the only way to know if the drive accepted
the request or discarded it.  It could even be used to list all the
available speeds of the drive.

The attached patch modifies the ide-cd driver so that after every speed
change request the new speed is updated.  Please note that the actual
modification is very little but I had to touch quite a few lines in order
to avoid to pre-declare the sub-functions.

Signed-off-by: Eric Piel 
Acked-by: Jens Axboe 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] Relax idecd dma alignment check

2005-05-31T16:11:57+00:00

Only the address needs alignment of mask bits, length should work with
a relaxed alignment check.

Signed-off-by: Jens Axboe 

[ This is take 2: make the length check be for 16-byte alignment, not
  just word alignment.  That should hopefully keep everybody happy,
  while still allowing CD writing with DMA ]

Signed-off-by: Linus Torvalds

ide-cd: revert DMA mask test change

2005-05-27T14:36:17+00:00

The change to require the DMA length to be only word-aligned was not
safe.

[PATCH] convert IDE device drivers to driver-model

2005-05-26T12:55:34+00:00

* add ide_bus_match() and export ide_bus_type
* split ide_remove_driver_from_hwgroup() out of ide_unregister()
* move device cleanup from ide_unregister() to drive_release_dev()
* convert ide_driver_t->name to driver->name
* convert ide_driver_t->{attach,cleanup} to driver->{probe,remove}
* remove ide_driver_t->busy as ide_bus_type->subsys.rwsem
  protects against concurrent ->{probe,remove} calls
* make ide_{un}register_driver() void as it cannot fail now
* use driver_{un}register() directly, remove ide_{un}register_driver()
* use device_register() instead of ata_attach(), remove ata_attach()
* add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op
* fix ide_replace_subdriver() and move it to ide-proc.c
* remove ide_driver_t->drives, ide_drives and drives_lock
* remove ide_driver_t->drivers, drivers and drivers_lock
* remove ide_drive_t->driver and DRIVER() macro

Signed-off-by: Bartlomiej Zolnierkiewicz

[PATCH] relax ide-cd dma restrictions

2005-05-25T17:17:08+00:00

This has been sitting for a while, and is causing lots of grief for
people burning CDs.  It relaxes the dma restriction for ide-cd,
requiring only the length to be 32-byte aligned, address should be fine
at normal double word alignment.

Signed-off-by: Jens Axboe 
Signed-off-by: Linus Torvalds

Linux-2.6.12-rc2

2005-04-16T22:20:36+00:00

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!