linux.git/drivers/ide/Kconfig, branch v2.6.25

ide: update references to Documentation/ide/ide.txt (v2)

2008-03-07T20:53:50+00:00

Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF option

2008-02-10T23:32:14+00:00

Introduce new option CONFIG_BLK_DEV_IDEDMA_SFF for non-PCI SFF-8038i compatible
bus mastering IDE controllers (which there are a few known), thus fixing a hack
made for Palmchip BK3710 controller...

Signed-off-by: Sergei Shtylyov 
Cc: Anton Salnikov 
Signed-off-by: Bartlomiej Zolnierkiewicz

pdc202xx_old: always enable burst mode

2008-02-10T23:32:13+00:00

Alan has noticed that distros always enabled burst mode
(+ datasheet confirms that it is the right thing to do).

Thus fix pdc202xx_old host driver to do it unconditionally
and remove no longer needed CONFIG_PDC202XX_BURST option.

Cc: Alan Cox 
Acked-by: Sergei Shtylyov 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide: introduce HAVE_IDE

2008-02-09T09:46:40+00:00

To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.

This is a step towards introducing drivers/Kconfig for arm.

Signed-off-by: Sam Ravnborg 
Acked-by: Russell King - ARM Linux 
Acked-by: Bartlomiej Zolnierkiewicz

Palmchip BK3710 IDE driver

2008-02-06T01:57:48+00:00

This is Palmchip BK3710 IDE controller support.

The IDE controller logic supports PIO, MultiWord-DMA and Ultra-DMA modes.
Supports interface to Compact Flash (CF) configured in True-IDE mode.

Bart:
- remove dead code
- fix ide_hwif_setup_dma() build problem

Signed-off-by: Anton Salnikov 
Reviewed-by: Alan Cox 
Reviewed-by: Sergei Shtylyov 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide-tape: remove EXPERIMENTAL driver status

2008-02-02T18:56:50+00:00

ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is
being only maintained now.

Signed-off-by: Borislav Petkov 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide-cd: move VERBOSE_IDE_CD_ERRORS code to ide-cd_verbose.c

2008-02-01T22:09:23+00:00

* Rename ide-cd kernel module to ide-cd_mod in preparation to moving code out
  from ide-cd.[c,h].   Add MODULE_ALIAS("ide-cd") to preserve compatibility.

* Move VERBOSE_IDE_CD_ERRORS code from ide-cd.[c,h] to ide-cd_verbose.c.

  ide-cd_verbose.c is IDE subsystem independent and may be easily converted
  into generic library usable by other drivers (i.e. libata) if needed.

* Add CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS config option to drivers/ide/Kconfig
  replacing VERBOSE_IDE_CD_ERRORS define.  Make this config option enabled by
  default and visible only if CONFIG_EMBEDDED is defined.

before the patch:
   text    data     bss     dec     hex filename
  22841     360    1056   24257    5ec1 drivers/ide/ide-cd.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y:
   text    data     bss     dec     hex filename
  22857     360    1056   24273    5ed1 drivers/ide/ide-cd_mod.o

after the patch w/ CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=n:
   text    data     bss     dec     hex filename
  15091     360    1056   16507    407b drivers/ide/ide-cd_mod.o

Signed-off-by: Bartlomiej Zolnierkiewicz

ide/Kconfig: use 'on-board' instead of 'built-in' in config options

2008-02-01T22:09:16+00:00

To avoid confusion between 'built-in' drivers and 'on-board'
controllers, consistently use the term 'on-board' for controllers.

Minor line-wrapping improvements in descriptions for config options.

[ Bart: thanks to Jan for 'built-in'->'on-board' suggestion ]

Signed-off-by: Frans Pop 
Cc: Jan Engelhardt 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate it

2008-01-26T19:13:09+00:00

Acked-by: Sergei Shtylyov 
Signed-off-by: Bartlomiej Zolnierkiewicz

ide: make remaining built-in only IDE host drivers modular (take 2)

2008-01-26T19:13:07+00:00

* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c
  file for probing PCI host drivers registered with IDE core (special case
  for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of
  the ordering in which all IDE host drivers are probed when IDE is built-in
  during link time.

* Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch
  specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris
  arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific).

* Move probing of ide-cris (cris arch specific) host driver before cmd640
  (x86 arch specific).

* Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends
  on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300
  (h8300 arch specific).

* Add "probe_vlb" kernel parameter to cmd640 host driver and update
  Documentation/ide.txt accordingly.

* Make IDE_ARM config option visible so it can also be disabled if needed.

* Remove bogus comment from ide.c while at it.

v2:
* Fix two issues spotted by Sergei:
  - replace ENOMEM error value by ENOENT in ide-h8300 host driver
  - fix MODULE_PARM_DESC() in cmd640 host driver

Cc: Sergei Shtylyov 
Cc: Mikael Starvik 
Cc: Geert Uytterhoeven 
Cc: Roman Zippel 
Cc: Benjamin Herrenschmidt 
Signed-off-by: Bartlomiej Zolnierkiewicz