Add read-only versions of all EEPROMs. These versions are read-only
on the i2c side, but can be written from the sysfs side.

Signed-off-by: Björn Ardö <bjorn.ardo@axis.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Commit b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH
and beyond") looks like to drop by accident Block Write-Block Read Process
Call support for Intel Sunrisepoint, Lewisburg, Denverton and Kaby Lake.

That support was added for above and newer platforms by the commit
315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call
support") so bring it back for above platforms.

Fixes: b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

The NACKF flag should be cleared in INTRIICNAKI interrupt processing as
description in HW manual.

This issue shows up quickly when PREEMPT_RT is applied and a device is
probed that is not plugged in (like a touchscreen controller). The result
is endless interrupts that halt system boot.

Fixes: 310c18a41450 ("i2c: riic: add driver")
Cc: stable@vger.kernel.org
Reported-by: Chien Nguyen <chien.nguyen.eb@rvc.renesas.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

We have a production-level laptop (Lenovo Yoga C630) which is exhibiting
a rather horrific bug.  When I2C HID devices are being scanned for at
boot-time the QCom Geni based I2C (Serial Engine) attempts to use DMA.
When it does, the laptop reboots and the user never sees the OS.

Attempts are being made to debug the reason for the spontaneous reboot.
No luck so far, hence the requirement for this hot-fix.  This workaround
will be removed once we have a viable fix.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull i2c updates from Wolfram Sang:

 - new driver for ICY, an Amiga Zorro card :)

 - axxia driver gained slave mode support, NXP driver gained ACPI

 - the slave EEPROM backend gained 16 bit address support

 - and lots of regular driver updates and reworks

* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
  i2c: tegra: Move suspend handling to NOIRQ phase
  i2c: imx: ACPI support for NXP i2c controller
  i2c: uniphier(-f): remove all dev_dbg()
  i2c: uniphier(-f): use devm_platform_ioremap_resource()
  i2c: slave-eeprom: Add comment about address handling
  i2c: exynos5: Remove IRQF_ONESHOT
  i2c: stm32f7: Make structure stm32f7_i2c_algo constant
  i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
  i2c-eeprom_slave: Add support for more eeprom models
  i2c: fsi: Add of_put_node() before break
  i2c: synquacer: Make synquacer_i2c_ops constant
  i2c: hix5hd2: Remove IRQF_ONESHOT
  i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
  watchdog: iTCO: Add support for Cannon Lake PCH iTCO
  i2c: iproc: Make bcm_iproc_i2c_quirks constant
  i2c: iproc: Add full name of devicetree node to adapter name
  i2c: piix4: Add ACPI support
  i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
  i2c: ocores: use request_any_context_irq() to register IRQ handler
  i2c: designware: Fix optional reset error handling
  ...

Pull chrome platform updates from Benson Leung:
 "CrOS EC / MFD Migration:
    - Move cros_ec core driver from mfd into chrome platform.

  Wilco EC:
    - Add batt_ppid_info command to Wilco telemetry driver.

  CrOS EC:
    - cros_ec_rpmsg : Add support to inform EC of suspend/resume status
    - cros_ec_rpmsg : Fix race condition on probe failed
    - cros_ec_chardev : Add a poll handler to receive MKBP events

  Misc:
    - bugfixes in cros_usbpd_logger and cros_ec_ishtp"

* tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue
  platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events
  platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed
  platform/chrome: chromeos_tbmc: Report wake events
  mfd: cros_ec: Use mfd_add_hotplug_devices() helper
  mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices
  mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs
  mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper
  mfd / platform: cros_ec: Reorganize platform and mfd includes
  mfd / platform: cros_ec: Rename config to a better name
  mfd: cros_ec: Switch to use the new cros-ec-chardev driver
  mfd / platform: cros_ec: Miscellaneous character device to talk with the EC
  mfd / platform: cros_ec: Move cros-ec core driver out from MFD
  mfd / platform: cros_ec: Handle chained ECs as platform devices
  platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support
  platform/chrome: chromeos_laptop: drop checks of NULL-safe functions
  platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver

Pull driver core updates from Greg Kroah-Hartman:
 "Here is the big driver core update for 5.4-rc1.

  There was a bit of a churn in here, with a number of core and OF
  platform patches being added to the tree, and then after much
  discussion and review and a day-long in-person meeting, they were
  decided to be reverted and a new set of patches is currently being
  reviewed on the mailing list.

  Other than that churn, there are two "persistent" branches in here
  that other trees will be pulling in as well during the merge window.
  One branch to add support for drivers to have the driver core
  automatically add sysfs attribute files when a driver is bound to a
  device so that the driver doesn't have to manually do it (and then
  clean it up, as it always gets it wrong).

  There's another branch in here for generic lookup helpers for the
  driver core that lots of busses are starting to use. That's the
  majority of the non-driver-core changes in this patch series.

  There's also some on-going debugfs file creation cleanup that has been
  slowly happening over the past few releases, with the goal to
  hopefully get that done sometime next year.

  All of these have been in linux-next for a while now with no reported
  issues"

[ Note that the above-mentioned generic lookup helpers branch was
  already brought in by the LED merge (commit 4feaab05dc1e) that had
  shared it.

  Also note that that common branch introduced an i2c bug due to a bad
  conversion, which got fixed here. - Linus ]

* tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits)
  coccinelle: platform_get_irq: Fix parse error
  driver-core: add include guard to linux/container.h
  sysfs: add BIN_ATTR_WO() macro
  driver core: platform: Export platform_get_irq_optional()
  hwmon: pwm-fan: Use platform_get_irq_optional()
  driver core: platform: Introduce platform_get_irq_optional()
  Revert "driver core: Add support for linking devices during device addition"
  Revert "driver core: Add edit_links() callback for drivers"
  Revert "of/platform: Add functional dependency link from DT bindings"
  Revert "driver core: Add sync_state driver/bus callback"
  Revert "of/platform: Pause/resume sync state during init and of_platform_populate()"
  Revert "of/platform: Create device links for all child-supplier depencencies"
  Revert "of/platform: Don't create device links for default busses"
  Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()"
  Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning"
  Revert "of/platform: Disable generic device linking code for PowerPC"
  devcoredump: fix typo in comment
  devcoredump: use memory_read_from_buffer
  of/platform: Disable generic device linking code for PowerPC
  device.h: Fix warnings for mismatched parameter names in comments
  ...

Pull LED updates from Jacek Anaszewski:
 "In this cycle we've finally managed to contribute the patch set
  sorting out LED naming issues. Besides that there are many changes
  scattered among various LED class drivers and triggers.

  LED naming related improvements:

   - add new 'function' and 'color' fwnode properties and deprecate
     'label' property which has been frequently abused for conveying
     vendor specific names that have been available in sysfs anyway

   - introduce a set of standard LED_FUNCTION* definitions

   - introduce a set of standard LED_COLOR_ID* definitions

   - add a new {devm_}led_classdev_register_ext() API with the
     capability of automatic LED name composition basing on the
     properties available in the passed fwnode; the function is
     backwards compatible in a sense that it uses 'label' data, if
     present in the fwnode, for creating LED name

   - add tools/leds/get_led_device_info.sh script for retrieving LED
     vendor, product and bus names, if applicable; it also performs
     basic validation of an LED name

   - update following drivers and their DT bindings to use the new LED
     registration API:

        - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
          leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt

  Other LED class improvements:

   - replace {devm_}led_classdev_register() macros with inlines

   - allow to call led_classdev_unregister() unconditionally

   - switch to use fwnode instead of be stuck with OF one

  LED triggers improvements:

   - led-triggers:
        - fix dereferencing of null pointer
        - fix a memory leak bug

   - ledtrig-gpio:
        - GPIO 0 is valid

  Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
  more complete driver exists, based on a generic driver for the AMD
  SOCs gpio-controller, supporting LEDs as well other devices:

   - drop profile field from priv data

   - drop iosize field from priv data

   - drop enum_apu_led_platform_types

   - drop superseeded apu2/3 led support

   - add pr_fmt prefix for better log output

   - fix error message on probing failure

  Other misc fixes and improvements to existing LED class drivers:

   - leds-ns2, leds-max77650:
        - add of_node_put() before return

   - leds-pwm, leds-is31fl32xx:
        - use struct_size() helper

   - leds-lm3697, leds-lm36274, leds-lm3532:
        - switch to use fwnode_property_count_uXX()

   - leds-lm3532:
        - fix brightness control for i2c mode
        - change the define for the fs current register
        - fixes for the driver for stability
        - add full scale current configuration
        - dt: Add property for full scale current.
        - avoid potentially unpaired regulator calls
        - move static keyword to the front of declarations
        - fix optional led-max-microamp prop error handling

   - leds-max77650:
        - add of_node_put() before return
        - add MODULE_ALIAS()
        - Switch to fwnode property API

   - leds-as3645a:
        - fix misuse of strlcpy

   - leds-netxbig:
        - add of_node_put() in netxbig_leds_get_of_pdata()
        - remove legacy board-file support

   - leds-is31fl319x:
        - simplify getting the adapter of a client

   - leds-ti-lmu-common:
        - fix coccinelle issue
        - move static keyword to the front of declaration

   - leds-syscon:
        - use resource managed variant of device register

   - leds-ktd2692:
        - fix a typo in the name of a constant

   - leds-lp5562:
        - allow firmware files up to the maximum length

   - leds-an30259a:
        - fix typo

   - leds-pca953x:
        - include the right header"

* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
  leds: lm3532: Fix optional led-max-microamp prop error handling
  led: triggers: Fix dereferencing of null pointer
  leds: ti-lmu-common: Move static keyword to the front of declaration
  leds: lm3532: Move static keyword to the front of declarations
  leds: trigger: gpio: GPIO 0 is valid
  leds: pwm: Use struct_size() helper
  leds: is31fl32xx: Use struct_size() helper
  leds: ti-lmu-common: Fix coccinelle issue in TI LMU
  leds: lm3532: Avoid potentially unpaired regulator calls
  leds: syscon: Use resource managed variant of device register
  leds: Replace {devm_}led_classdev_register() macros with inlines
  leds: Allow to call led_classdev_unregister() unconditionally
  leds: lm3532: Add full scale current configuration
  dt: lm3532: Add property for full scale current.
  leds: lm3532: Fixes for the driver for stability
  leds: lm3532: Change the define for the fs current register
  leds: lm3532: Fix brightness control for i2c mode
  leds: Switch to use fwnode instead of be stuck with OF one
  leds: max77650: Switch to fwnode property API
  led: triggers: Fix a memory leak bug
  ...

Pull documentation updates from Jonathan Corbet:
 "It's a somewhat calmer cycle for docs this time, as the churn of the
  mass RST conversion is happily mostly behind us.

   - A new document on reproducible builds.

   - We finally got around to zapping the documentation for hardware
     support that was removed in 2004; one doesn't want to rush these
     things.

   - The usual assortment of fixes, typo corrections, etc"

* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
  Documentation: kbuild: Add document about reproducible builds
  docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
  Documentation: Add "earlycon=sbi" to the admin guide
  doc:lock: remove reference to clever use of read-write lock
  devices.txt: improve entry for comedi (char major 98)
  docs: mtd: Update spi nor reference driver
  doc: arm64: fix grammar dtb placed in no attributes region
  Documentation: sysrq: don't recommend 'S' 'U' before 'B'
  mailmap: Update email address for Quentin Perret
  docs: ftrace: clarify when tracing is disabled by the trace file
  docs: process: fix broken link
  Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
  Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
  Documentation/arm/sa1100: Remove some obsolete documentation
  docs/zh_CN: update Chinese howto.rst for latexdocs making
  Documentation: virt: Fix broken reference to virt tree's index
  docs: Fix typo on pull requests guide
  kernel-doc: Allow anonymous enum
  Documentation: sphinx: Don't parse socket() as identifier reference
  Documentation: sphinx: Add missing comma to list of strings
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "The main change this time around is a cleanup of some of the oldest
  platforms based on the XScale and ARM9 CPU cores, which are between 10
  and 20 years old.

  The Kendin/Micrel/Microchip KS8695, Winbond/Nuvoton W90x900 and Intel
  IOP33x/IOP13xx platforms are removed after we determined that nobody
  is using them any more.

  The TI Davinci and NXP LPC32xx platforms on the other hand are still
  in active use and are converted to the ARCH_MULTIPLATFORM build,
  meaning that we can compile a kernel that works on these along with
  most other ARMv5 platforms. Changes toward that goal are also merged
  for IOP32x, but additional work is needed to complete this. Patches
  for the remaining ARMv5 platforms have started but need more work and
  some testing.

  Support for the new ASpeed AST2600 gets added, this is based on the
  Cortex-A7 ARMv7 core, and is a newer version of the existing ARMv5 and
  ARMv6 chips in the same family.

  Other changes include a cleanup of the ST-Ericsson ux500 platform and
  the move of the TI Davinci platform to a new clocksource driver"

[ The changes had marked INTEL_IOP_ADMA and USB_LPC32XX as being
  buildable on other platforms through COMPILE_TEST, but that causes new
  warnings that I most definitely do not want to see during the merge
  window as that could hide other issues.

  So the COMPILE_TEST option got disabled for them again   - Linus ]

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: multi_v5_defconfig: make DaVinci part of the ARM v5 multiplatform build
  ARM: davinci: support multiplatform build for ARM v5
  arm64: exynos: Enable exynos-chipid driver
  ARM: OMAP2+: Delete an unnecessary kfree() call in omap_hsmmc_pdata_init()
  ARM: OMAP2+: move platform-specific asm-offset.h to arch/arm/mach-omap2
  ARM: davinci: dm646x: Fix a typo in the comment
  ARM: davinci: dm646x: switch to using the clocksource driver
  ARM: davinci: dm644x: switch to using the clocksource driver
  ARM: aspeed: Enable SMP boot
  ARM: aspeed: Add ASPEED AST2600 architecture
  ARM: aspeed: Select timer in each SoC
  dt-bindings: arm: cpus: Add ASPEED SMP
  ARM: imx: stop adjusting ar8031 phy tx delay
  mailmap: map old company name to new one @microchip.com
  MAINTAINERS: at91: remove the TC entry
  MAINTAINERS: at91: Collect all pinctrl/gpio drivers in same entry
  ARM: at91: move platform-specific asm-offset.h to arch/arm/mach-at91
  MAINTAINERS: Extend patterns for Samsung SoC, Security Subsystem and clock drivers
  ARM: s3c64xx: squash samsung_usb_phy.h into setup-usb-phy.c
  ARM: debug-ll: Add support for r7s9210
  ...