linux.git/drivers/i2c, branch v5.13

i2c: robotfuzz-osif: fix control-request directions

2021-06-24T20:08:00+00:00

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.

Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously
used the osif_usb_read() helper and set the IN direction bit.

Reported-by: syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com
Fixes: 83e53a8f120f ("i2c: Add bus driver for for OSIF USB i2c device.")
Cc: stable@vger.kernel.org      # 3.14
Signed-off-by: Johan Hovold 
Signed-off-by: Wolfram Sang

i2c: dev: Add __user annotation

2021-06-24T19:47:43+00:00

Fix Sparse warnings:
drivers/i2c/i2c-dev.c:546:19: warning: incorrect type in assignment (different address spaces)
drivers/i2c/i2c-dev.c:549:53: warning: incorrect type in argument 2 (different address spaces)

compat_ptr() returns a pointer tagged __user which gets assigned to a
pointer missing the __user annotation. The same pointer is passed to
copy_from_user() as an argument where it is expected to have the __user
annotation. Fix both by adding the __user annotation to the pointer.

Fixes: 7d5cb45655f2 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: Andreas Hecht 
Signed-off-by: Wolfram Sang

i2c: cp2615: check for allocation failure in cp2615_i2c_recv()

2021-06-20T21:13:34+00:00

We need to add a check for if the kzalloc() fails.

Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Signed-off-by: Dan Carpenter 
Reviewed-by: Bence Csókás 
Signed-off-by: Wolfram Sang

i2c: i801: Ensure that SMBHSTSTS_INUSE_STS is cleared when leaving i801_access

2021-06-20T20:58:58+00:00

As explained in [0] currently we may leave SMBHSTSTS_INUSE_STS set,
thus potentially breaking ACPI/BIOS usage of the SMBUS device.

Seems patch [0] needs a little bit more of review effort, therefore
I'd suggest to apply a part of it as quick win. Just clearing
SMBHSTSTS_INUSE_STS when leaving i801_access() should fix the
referenced issue and leaves more time for discussing a more
sophisticated locking handling.

[0] https://www.spinics.net/lists/linux-i2c/msg51558.html

Fixes: 01590f361e94 ("i2c: i801: Instantiate SPD EEPROMs automatically")
Suggested-by: Hector Martin 
Signed-off-by: Heiner Kallweit 
Reviewed-by: Hector Martin 
Reviewed-by: Jean Delvare 
Tested-by: Jean Delvare 
Signed-off-by: Wolfram Sang

i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops

2021-06-04T20:32:58+00:00

Mark bus as suspended during system suspend to block the future
transfers. Implement geni_i2c_resume_noirq() to resume the bus.

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi 
Reviewed-by: Stephen Boyd 
Signed-off-by: Wolfram Sang

i2c: qcom-geni: Add shutdown callback for i2c

2021-06-04T20:32:39+00:00

If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.

So, implement shutdown callback for i2c driver to suspend the bus
during system "reboot" or "shutdown".

Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi 
Reviewed-by: Stephen Boyd 
Signed-off-by: Wolfram Sang

i2c: tegra-bpmp: Demote kernel-doc abuses

2021-06-03T20:31:42+00:00

Fixes the following W=1 kernel build warning(s):

 drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_serialize_i2c_msg'
 drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'request' not described in 'tegra_bpmp_serialize_i2c_msg'
 drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_serialize_i2c_msg'
 drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: Function parameter or member 'num' not described in 'tegra_bpmp_serialize_i2c_msg'
 drivers/i2c/busses/i2c-tegra-bpmp.c:86: warning: expecting prototype for The serialized I2C format is simply the following(). Prototype was for tegra_bpmp_serialize_i2c_msg() instead
 drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'i2c' not described in 'tegra_bpmp_i2c_deserialize'
 drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'response' not described in 'tegra_bpmp_i2c_deserialize'
 drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'msgs' not described in 'tegra_bpmp_i2c_deserialize'
 drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: Function parameter or member 'num' not described in 'tegra_bpmp_i2c_deserialize'
 drivers/i2c/busses/i2c-tegra-bpmp.c:130: warning: expecting prototype for The data in the BPMP(). Prototype was for tegra_bpmp_i2c_deserialize() instead

Signed-off-by: Lee Jones 
Acked-by: Thierry Reding 
Signed-off-by: Wolfram Sang

i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers

2021-06-03T20:25:24+00:00

Fixes the following W=1 kernel build warning(s):

 drivers/i2c/busses/i2c-altera.c:74: warning: cannot understand function prototype: 'struct altr_i2c_dev '
 drivers/i2c/busses/i2c-altera.c:180: warning: Function parameter or member 'idev' not described in 'altr_i2c_transfer'
 drivers/i2c/busses/i2c-altera.c:180: warning: Function parameter or member 'data' not described in 'altr_i2c_transfer'
 drivers/i2c/busses/i2c-altera.c:193: warning: Function parameter or member 'idev' not described in 'altr_i2c_empty_rx_fifo'
 drivers/i2c/busses/i2c-altera.c:209: warning: Function parameter or member 'idev' not described in 'altr_i2c_fill_tx_fifo'

Signed-off-by: Lee Jones 
Signed-off-by: Wolfram Sang

i2c: s3c2410: fix possible NULL pointer deref on read message after write

2021-05-28T08:16:23+00:00

Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained.  However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller.  At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction".  This stop results in clearing the
message queue (i2c->msg = NULL).

The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.

The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
   if (!is_msgend(i2c)) {

2. Condition !is_lastmsg(i2c), taking true branch.
   } else if (!is_lastmsg(i2c)) {

3. Condition i2c->msg->flags & 1, taking true branch.
   if (i2c->msg->flags & I2C_M_RD) {

4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
   s3c24xx_i2c_stop(i2c, -EINVAL);

5. Jumping to label retry_write.
   goto retry_write;

6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
   if (!is_msgend(i2c)) {"

All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning).  This seems a reasonable choice also here
since message buffer was entirely emptied.

Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Wolfram Sang

i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset

2021-05-28T08:13:07+00:00

The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.

Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang 
Signed-off-by: Wolfram Sang