linux.git/drivers/i2c, branch v3.7-rc3 Linux kernel source tree Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-10-11T01:27:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-11T01:27:51+00:00 12250d843e8489ee00b5b7726da855e51694e792 Pull i2c-embedded changes from Wolfram Sang: "The changes for i2c-embedded include: - massive rework of the omap driver - massive rework of the at91 driver. In fact, the old driver gets removed; I am okay with this approach since the old driver was depending on BROKEN and its limitations made it practically unusable, so people used bitbanging instead. But even if there are users, there is no platform_data or module parameter which would need to be converted. It is just another driver doing I2C transfers, just way better. Modifications of arch/arm/at91 related files have proper acks from the maintainer. - new driver for R-Car I2C - devicetree and generic_clock conversions and fixes - usual driver fixes and changes. The rework patches have come a long way and lots of people have been involved in creating/testing them. Most patches have been in linux-next at least since 3.6-rc5. A few have been added in the last week, I have to admit. An unexpected (but welcome :)) peak in private life is the cause for that. The "late" patches shouldn't cause any merge conflicts and I will have a special eye on them during the stabilization phase. This is an exception and I want to have the patches in place properly in time again for the next kernels." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits) MXS: Implement DMA support into mxs-i2c i2c: add Renesas R-Car I2C driver i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints i2c: nomadik: Add Device Tree support to the Nomadik I2C driver i2c: algo: pca: Fix chip reset function for PCA9665 i2c: mpc: Wait for STOP to hit the bus i2c: davinci: preparation for switch to common clock framework omap-i2c: fix incorrect log message when using a device tree i2c: omap: sanitize exit path i2c: omap: switch over to autosuspend API i2c: omap: remove unnecessary pm_runtime_suspended check i2c: omap: switch to threaded IRQ support i2c: omap: remove redundant status read i2c: omap: get rid of the "complete" label i2c: omap: resize fifos before each message i2c: omap: simplify IRQ exit path i2c: omap: always return IRQ_HANDLED i2c: omap: simplify errata check i2c: omap: bus: add a receiver flag ... 
Pull i2c-embedded changes from Wolfram Sang:
 "The changes for i2c-embedded include:

   - massive rework of the omap driver
   - massive rework of the at91 driver.  In fact, the old driver gets
     removed; I am okay with this approach since the old driver was
     depending on BROKEN and its limitations made it practically
     unusable, so people used bitbanging instead.  But even if there are
     users, there is no platform_data or module parameter which would
     need to be converted.  It is just another driver doing I2C
     transfers, just way better.  Modifications of arch/arm/at91 related
     files have proper acks from the maintainer.
   - new driver for R-Car I2C
   - devicetree and generic_clock conversions and fixes
   - usual driver fixes and changes.

  The rework patches have come a long way and lots of people have been
  involved in creating/testing them.  Most patches have been in
  linux-next at least since 3.6-rc5.  A few have been added in the last
  week, I have to admit.

  An unexpected (but welcome :)) peak in private life is the cause for
  that.  The "late" patches shouldn't cause any merge conflicts and I
  will have a special eye on them during the stabilization phase.  This
  is an exception and I want to have the patches in place properly in
  time again for the next kernels."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits)
  MXS: Implement DMA support into mxs-i2c
  i2c: add Renesas R-Car I2C driver
  i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare
  ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints
  i2c: nomadik: Add Device Tree support to the Nomadik I2C driver
  i2c: algo: pca: Fix chip reset function for PCA9665
  i2c: mpc: Wait for STOP to hit the bus
  i2c: davinci: preparation for switch to common clock framework
  omap-i2c: fix incorrect log message when using a device tree
  i2c: omap: sanitize exit path
  i2c: omap: switch over to autosuspend API
  i2c: omap: remove unnecessary pm_runtime_suspended check
  i2c: omap: switch to threaded IRQ support
  i2c: omap: remove redundant status read
  i2c: omap: get rid of the "complete" label
  i2c: omap: resize fifos before each message
  i2c: omap: simplify IRQ exit path
  i2c: omap: always return IRQ_HANDLED
  i2c: omap: simplify errata check
  i2c: omap: bus: add a receiver flag
  ...
MXS: Implement DMA support into mxs-i2c 2012-10-08T10:47:33+00:00 Marek Vasut marex@denx.de 2012-08-24T03:44:31+00:00 62885f59a26195d9f6a3f8c795225dfbab62a110 This patch implements DMA support into mxs-i2c. DMA transfers are now enabled via DT. The DMA operation is enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> [wsa: rebased to 3.6-rc7] Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
This patch implements DMA support into mxs-i2c. DMA transfers are now enabled
via DT. The DMA operation is enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

[wsa: rebased to 3.6-rc7]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Merge tag 'v3.6-rc7' into i2c-embedded/for-next 2012-10-08T10:46:32+00:00 Wolfram Sang w.sang@pengutronix.de 2012-10-08T10:46:32+00:00 102084d3d3969646cc89ea159e50898aeafc6649 Linux 3.6-rc7 Needed to get updates from i2c-embedded/for-current into i2c-embedded/for-next 
Linux 3.6-rc7

Needed to get updates from i2c-embedded/for-current into i2c-embedded/for-next
i2c: add Renesas R-Car I2C driver 2012-10-08T10:46:25+00:00 Kuninori Morimoto kuninori.morimoto.gx@renesas.com 2012-09-28T06:44:25+00:00 6ccbe607132bd823abbad8d32b13af89161707da R-Car I2C is similar with SH7760 I2C. But the SH7760 I2C driver had many workaround operations, since H/W had bugs. Thus, it was pointless to keep compatible between SH7760 and R-Car I2C drivers. This patch creates new Renesas R-Car I2C driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
R-Car I2C is similar with SH7760 I2C.
But the SH7760 I2C driver had many workaround operations, since H/W had bugs.
Thus, it was pointless to keep compatible between SH7760 and R-Car I2C drivers.
This patch creates new Renesas R-Car I2C driver.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux 2012-10-07T22:14:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2012-10-07T22:14:06+00:00 d8dc91b753b881c60c766c06aeec87675a07df4a Pul ACPI & Power Management updates from Len Brown: - acpidump utility added - intel_idle driver now supports IVB Xeon - turbostat utility can now count SMIs - ACPI can now bind to USB3 hubs - misc fixes * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits) ACPI: Add new sysfs interface to export device description ACPI: Harden acpi_table_parse_entries() against BIOS bug tools/power/turbostat: add option to count SMIs, re-name some options tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas intel_idle: enable IVB Xeon support tools/power turbostat: add [-m MSR#] option tools/power turbostat: make -M output pretty tools/power turbostat: print more turbo-limit information tools/power turbostat: delete unused line tools/power turbostat: run on IVB Xeon tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs ACPI: run _OSC after ACPI_FULL_INITIALIZATION tools/power/acpi/acpidump: create acpidump(8), local make install targets tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs tools/power/acpi/acpidump: version 20071116 tools/power/acpi/acpidump: version 20070714 tools/power/acpi/acpidump: version 20060606 tools/power/acpi/acpidump: version 20051111 xo15-ebook: convert to module_acpi_driver() ... 
Pul ACPI & Power Management updates from Len Brown:
 - acpidump utility added
 - intel_idle driver now supports IVB Xeon
 - turbostat utility can now count SMIs
 - ACPI can now bind to USB3 hubs
 - misc fixes

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (49 commits)
  ACPI: Add new sysfs interface to export device description
  ACPI: Harden acpi_table_parse_entries() against BIOS bug
  tools/power/turbostat: add option to count SMIs, re-name some options
  tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas
  intel_idle: enable IVB Xeon support
  tools/power turbostat: add [-m MSR#] option
  tools/power turbostat: make -M output pretty
  tools/power turbostat: print more turbo-limit information
  tools/power turbostat: delete unused line
  tools/power turbostat: run on IVB Xeon
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  ACPI: run _OSC after ACPI_FULL_INITIALIZATION
  tools/power/acpi/acpidump: create acpidump(8), local make install targets
  tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfs
  tools/power/acpi/acpidump: version 20071116
  tools/power/acpi/acpidump: version 20070714
  tools/power/acpi/acpidump: version 20060606
  tools/power/acpi/acpidump: version 20051111
  xo15-ebook: convert to module_acpi_driver()
  ...
i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare 2012-10-06T13:57:25+00:00 Thomas Abraham thomas.abraham@linaro.org 2012-10-02T23:26:39+00:00 d3b64c59341ac88b37a4474f8dee86b0d37accca Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints 2012-10-06T11:43:38+00:00 Jean Pihet jean.pihet@newoldbits.com 2012-09-20T16:08:03+00:00 3db11feffc1ad2ab9dea27789e6b5b3032827adc Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat API to the new PM QoS API. Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY class of PM QoS. The resulting MPU constraints are used by cpuidle to decide the next power state of the MPU subsystem. The I2C device latency timing is derived from the FIFO size and the clock speed and so is applicable to all OMAP SoCs. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
Convert the driver from the outdated omap_pm_set_max_mpu_wakeup_lat
API to the new PM QoS API.
Since the constraint is on the MPU subsystem, use the PM_QOS_CPU_DMA_LATENCY
class of PM QoS. The resulting MPU constraints are used by cpuidle to
decide the next power state of the MPU subsystem.

The I2C device latency timing is derived from the FIFO size and the
clock speed and so is applicable to all OMAP SoCs.

Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
i2c: nomadik: Add Device Tree support to the Nomadik I2C driver 2012-10-06T11:20:33+00:00 Lee Jones lee.jones@linaro.org 2012-08-06T10:09:57+00:00 43fea5813c56e4327371fd3c2209791ef7822de2 Here we apply the bindings required for successful Device Tree probing of the i2c-nomadik driver. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
Here we apply the bindings required for successful Device Tree
probing of the i2c-nomadik driver.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
i2c: algo: pca: Fix chip reset function for PCA9665 2012-10-06T11:14:36+00:00 Thomas Kavanagh tkavanagh@juniper.net 2012-09-21T03:20:46+00:00 a76e7c6821b5dddf69db9d76ec282819545f5b73 The parameter passed to pca9665_reset is adap->data (which is bus driver specific), not i2c_algp_pca_data *adap. pca9665_reset expects it to be i2c_algp_pca_data *adap. All other wrappers from the algo call back to the bus driver, which knows to handle its custom data. Only pca9665_reset resides inside the algorithm code and does not know how to handle a custom data structure. This can result in a kernel crash. Fix by re-factoring pca_reset() from a macro to a function handling chip specific code, and only call adap->reset_chip() if the chip is not PCA9665. Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> 
The parameter passed to pca9665_reset is adap->data (which is bus driver
specific), not i2c_algp_pca_data *adap. pca9665_reset expects it to be
i2c_algp_pca_data *adap. All other wrappers from the algo call back to
the bus driver, which knows to handle its custom data. Only pca9665_reset
resides inside the algorithm code and does not know how to handle a custom
data structure. This can result in a kernel crash.

Fix by re-factoring pca_reset() from a macro to a function handling chip
specific code, and only call adap->reset_chip() if the chip is not PCA9665.

Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net>
Signed-off-by: Guenter Roeck <groeck@juniper.net>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
i2c-piix4: Fix build failure 2012-10-05T20:23:55+00:00 Daniel J Blueman daniel@quora.org 2012-10-05T20:23:55+00:00 c415b303a704e5c5f766fc0404093910c36cc4ab Fix build failure in Intel PIIX4 I2C driver. Signed-off-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org [v3.6] 
Fix build failure in Intel PIIX4 I2C driver.

Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@vger.kernel.org [v3.6]