Pull char/misc/IIO/etc driver updates from Greg KH:
 "Here is the big set of char, misc, iio, counter, fpga, and other small
  driver subsystems for 7.3-rc1.

  Overall, due to some driver removals we only added a bit more code
  than removed, which was a nice change. Highlights in this merge
  request are:

   - Loads of IIO driver updates and additions

   - binder driver updates (more on that below...)

   - Removal of the SGI XP and GRU drivers as they are not used anymore
     and turn out to be pretty insecure overall

   - Removal of the obsolete ibmasm driver as it's not being used
     anymore

   - Coresight driver updates and additions

   - Mei driver udpates

   - Counter driver updates

   - FPGA driver updates

   - ICC driver updates

   - lots and lots of other tiny driver updates to resolve reported
     issues

  All of these have been in linux-next for a while"

* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
  iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
  iio: adc: pac1921: fix wrong channel used in trigger handler read
  iio: light: gp2ap002: re-enable irq if runtime suspend fails
  iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
  iio: light: apds9306: fix PM reference leak in apds9306_read_data()
  iio: gyro: mpu3050: fix sign of raw angular velocity readings
  iio: srf04: fix pm_runtime handling on probe error path
  iio: adc: ad4080: configure backend data size
  iio: adc: adi-axi-adc: add data size support for AD408X backend
  iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
  iio: dac: ad5446: fix OF module device table
  iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
  iio: light: opt4001: Reject integration times with a non-zero seconds part
  iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
  iio: light: opt4001: Fix power down clearing bits of the wrong register
  iio: light: opt4060: Fix incorrect register name in threshold read error message
  iio: light: opt4060: Fix pointer type passed to div_u64_rem()
  iio: light: opt4060: Reject integration times with a non-zero seconds part
  iio: light: ltrf216a: fix runtime PM reference leak in error path
  iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
  ...

The Kandou KB9002 is an 8-lane PCIe 5.0 retimer that exposes an SMBus
target with mandatory PEC. Add a hwmon driver reporting the firmware
aggregated maximum die temperature as temp1_input, with the firmware
version and boot status under debugfs.

Signed-off-by: Andy Chung <Andy.Chung@amd.com>
Link: https://lore.kernel.org/r/20260724-kb9002-upstream-v5-3-9523c3ffe83a@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for ESWIN EIC7700 Voltage and Temperature sensor. The driver
supports temperature and voltage monitoring with polynomial conversion,
and provides sysfs interface for sensor data access.

The PVT IP contains one temperature sensor and one voltage sensor.

Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Link: https://lore.kernel.org/r/20260630091220.1608-1-dongxuyang@eswincomputing.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add a driver for the temperature and voltage sensors on PolarFire SoC.
The temperature reports how hot the die is, and the voltages are the
SoC's 1.05, 1.8 and 2.5 volt rails respectively.

The hardware supports alarms in theory, but there is an erratum that
prevents clearing them once triggered, so no support is added for them.

The hardware measures voltage with 16 bits, of which 1 is a sign bit and
the remainder holds the voltage as a fixed point integer value. It's
improbable that the hardware will work if the voltages are negative, so
the driver ignores the sign bits.

There's no dt support etc here because this is the child of a simple-mfd
syscon.

Signed-off-by: Lars Randers <lranders@mail.dk>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260629-wriggle-headscarf-c85a4070dddb@spud
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add a hardware monitor driver for Altera SoC FPGA devices using the
Stratix 10 service layer. Sensor channels are selected based on the
service layer compatible string.

Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/a79aee37be7067691fd02a3a9cfd134c995e5a95.1784785709.git.tze.yee.ng@altera.com/#r
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull USB and Thunderbolt driver updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.

  Lots of little stuff in here, major highlights include:

   - USB4STREAM support for Thunderbolt devices. A new way to send "raw"
     data very quickly over a USB4 connection to another system directly

   - Other thunderbolt updates and changes to make the stream code work

   - xhci driver updates and additions

   - typec driver updates and additions

   - usb gadget driver updates and fixes for reported issues

   - zh_CN documentation translation of the USB documentation

   - usb-serial driver updates

   - dts cleanups for some USB platforms

   - other minor USB driver updates and tweaks

  All of these have been in linux-next for over a week with no reported
  issues, most of them for many many weeks"

* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
  usb: ucsi: huawei_gaokun: support mode switching
  thunderbolt: debugfs: Fix sideband write size check
  thunderbolt: debugfs: Fix margining error counter buffer leak
  usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
  usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
  usb: xhci: allocate internal DCBAA mirror dynamically
  usb: xhci: allocate DCBAA based on host controller max slots
  usb: xhci: refactor DCBAA struct
  xhci: Prevent queuing new commands if xhci is inaccessible
  xhci: dbc: detect and recover hung DbC during enumeraton
  xhci: dbc: add timestamps to DbC state changes in a new helper.
  xhci: dbc: add helper to set and clear DbC DCE enable bit
  xhci: dbc: serialize enabling and disabling dbc
  xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
  usb: xhci: Improve Soft Retries after short transfers
  usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
  usb: xhci: Remove skip_isoc_td()
  usb: xhci: Simplify xhci_quiesce()
  usb: xhci: remove legacy 'num_trbs_free' tracking
  usb: xhci: fix typo in xhci_set_port_power() comment
  ...

This is the hwmon driver for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family.

EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels,
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2  and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-2-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Support the LTC4283 Hot Swap Controller. The device features programmable
current limit with foldback and independently adjustable inrush current to
optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET
temperature rise for reliable protection against overstresses.

An I2C interface and onboard ADC allow monitoring of board current,
voltage, power, energy, and fault status.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-2-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add hwmon driver for the ARCTIC Fan Controller, a USB HID device
(VID 0x3904, PID 0xF001) with 10 fan channels. Exposes fan speed in
RPM (read-only) and PWM duty cycle (0-255, read/write) via sysfs.

The device pushes IN reports at ~1 Hz containing RPM readings. PWM is
set via OUT reports; the device applies the new duty cycle and sends
back a 2-byte ACK (Report ID 0x02). The driver waits up to 1 s for
the ACK using a completion. Measured device latency: max ~563 ms over
500 iterations. PWM control is manual-only: the device never changes
duty cycle autonomously.

raw_event() may run in hardirq context, so fan_rpm[] is protected by
a spinlock with irq-save. pwm_duty[] is also protected by this spinlock
because reset_resume() clears it outside the hwmon core lock. The OUT
report buffer is built and write_pending is armed under the same lock so
that no reset_resume() can race with the pwm_duty[] snapshot. priv->buf
is exclusively accessed by write(), which the hwmon core serializes.

Signed-off-by: Aureo Serrano de Souza <aureo.serrano@arctic.de>
Link: https://lore.kernel.org/r/20260508064405.38676-1-aureo.serrano@arctic.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Add an auxiliary-bus hwmon driver for the temperature sensor exposed by
AMD Promontory 21 (PROM21) xHCI PCI functions. The driver binds to the
"hwmon" auxiliary device published by the PROM21 xHCI PCI glue and
exposes the sensor as temp1_input under the prom21_xhci hwmon device.

The sensor is accessed through a PROM21 vendor index/data register pair
in the xHCI PCI MMIO BAR. The driver consumes parent-provided MMIO data
from the PROM21 PCI glue instead of inspecting the parent PCI driver's
drvdata. The read path restores the previous vendor index value after
sampling and does not runtime-resume the parent PCI device; reads from a
suspended parent return -ENODATA.

Document the supported device, register access, runtime PM behavior, and
sysfs lookup method. The documentation also records the observation
method used to identify the register pair and derive the conversion
formula.

Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-3-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>