linux.git/drivers/hid, branch v6.18-rc2 Linux kernel source tree Merge tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid 2025-10-18T18:18:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-10-18T18:18:18+00:00 2953fb65481b262514ac13f24ffbc70eeace68c6 Pull HID fixes from Jiri Kosina: - fix for sticky fingers handling in hid-multitouch (Benjamin Tissoires) - fix for reporting of 0 battery levels (Dmitry Torokhov) - build fix for hid-haptic in certain configurations (Jonathan Denose) - improved probe and avoiding spamming kernel log by hid-nintendo (Vicki Pfau) - fix for OOB in hid-cp2112 (Deepak Sharma) - interrupt handling fix for intel-thc-hid (Even Xu) - a couple of new device IDs and device-specific quirks * tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL selftests/hid: add tests for missing release on the Dell Synaptics HID: multitouch: fix sticky fingers HID: multitouch: fix name of Stylus input devices HID: hid-input: only ignore 0 battery events for digitizers HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable" HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC HID: nintendo: Rate limit IMU compensation message HID: nintendo: Wait longer for initial probe HID: core: Add printk_ratelimited variants to hid_warn() etc HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel HID: quirks: avoid Cooler Master MM712 dongle wakeup bug HID: cp2112: Add parameter validation to data length HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting 
Pull HID fixes from Jiri Kosina:

 - fix for sticky fingers handling in hid-multitouch (Benjamin
   Tissoires)

 - fix for reporting of 0 battery levels (Dmitry Torokhov)

 - build fix for hid-haptic in certain configurations (Jonathan Denose)

 - improved probe and avoiding spamming kernel log by hid-nintendo
   (Vicki Pfau)

 - fix for OOB in hid-cp2112 (Deepak Sharma)

 - interrupt handling fix for intel-thc-hid (Even Xu)

 - a couple of new device IDs and device-specific quirks

* tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL
  selftests/hid: add tests for missing release on the Dell Synaptics
  HID: multitouch: fix sticky fingers
  HID: multitouch: fix name of Stylus input devices
  HID: hid-input: only ignore 0 battery events for digitizers
  HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"
  HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC
  HID: nintendo: Rate limit IMU compensation message
  HID: nintendo: Wait longer for initial probe
  HID: core: Add printk_ratelimited variants to hid_warn() etc
  HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel
  HID: quirks: avoid Cooler Master MM712 dongle wakeup bug
  HID: cp2112: Add parameter validation to data length
  HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's
  HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection
  HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting
HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL 2025-10-16T16:19:22+00:00 Stuart Hayhurst stuart.a.hayhurst@gmail.com 2025-10-06T01:05:49+00:00 ed80cc4667ac997b84546e6d35f0a0ae525d239c The Logitech G502 Hero Wireless's high resolution scrolling resets after being unplugged without notifying the driver, causing extremely slow scrolling. The only indication of this is a battery update packet, so add a quirk to detect when the device is unplugged and re-enable the scrolling. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037 Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
The Logitech G502 Hero Wireless's high resolution scrolling resets after
being unplugged without notifying the driver, causing extremely slow
scrolling.

The only indication of this is a battery update packet, so add a quirk to
detect when the device is unplugged and re-enable the scrolling.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218037
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: multitouch: fix sticky fingers 2025-10-15T15:27:06+00:00 Benjamin Tissoires bentiss@kernel.org 2025-10-08T14:06:58+00:00 46f781e0d151844589dc2125c8cce3300546f92a The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering the case when slots were not released during the last report. This can be problematic if the firmware forgets to release a finger while others are still present. This was observed on the Synaptics DLL0945 touchpad found on the Dell XPS 9310 and the Dell Inspiron 5406. Fixes: 4f4001bc76fd ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing") Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
The sticky fingers quirk (MT_QUIRK_STICKY_FINGERS) was only considering
the case when slots were not released during the last report.
This can be problematic if the firmware forgets to release a finger
while others are still present.

This was observed on the Synaptics DLL0945 touchpad found on the Dell
XPS 9310 and the Dell Inspiron 5406.

Fixes: 4f4001bc76fd ("HID: multitouch: fix rare Win 8 cases when the touch up event gets missing")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: multitouch: fix name of Stylus input devices 2025-10-15T15:17:30+00:00 Thadeu Lima de Souza Cascardo cascardo@igalia.com 2025-10-08T12:40:33+00:00 aa4daea418ee4215dca5c8636090660c545cb233 HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by commit c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN"). However, on multitouch devices, these suffixes may be overridden. Before that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after that, multitouch would override them to have an "UNKNOWN" suffix. Just add HID_DG_PEN to the list of non-overriden suffixes in multitouch. Before this fix: [ 0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8 ELAN9008:00 04F3:2E14 UNKNOWN After this fix: [ 0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8 ELAN9008:00 04F3:2E14 Stylus Fixes: c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
HID_DG_PEN devices should have a suffix of "Stylus", as pointed out by
commit c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN").
However, on multitouch devices, these suffixes may be overridden. Before
that commit, HID_DG_PEN devices would get the "Stylus" suffix, but after
that, multitouch would override them to have an "UNKNOWN" suffix. Just add
HID_DG_PEN to the list of non-overriden suffixes in multitouch.

Before this fix:

[    0.470981] input: ELAN9008:00 04F3:2E14 UNKNOWN as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8
ELAN9008:00 04F3:2E14 UNKNOWN

After this fix:

[    0.474332] input: ELAN9008:00 04F3:2E14 Stylus as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-16/i2c-ELAN9008:00/0018:04F3:2E14.0001/input/input8

ELAN9008:00 04F3:2E14 Stylus

Fixes: c0ee1d571626 ("HID: hid-input: Add suffix also for HID_DG_PEN")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: hid-input: only ignore 0 battery events for digitizers 2025-10-15T15:14:39+00:00 Dmitry Torokhov dmitry.torokhov@gmail.com 2025-10-15T04:28:44+00:00 0187c08058da3e7f11b356ac27e0c427d36f33f2 Commit 581c4484769e ("HID: input: map digitizer battery usage") added handling of battery events for digitizers (typically for batteries presented in stylii). Digitizers typically report correct battery levels only when stylus is actively touching the surface, and in other cases they may report battery level of 0. To avoid confusing consumers of the battery information the code was added to filer out reports with 0 battery levels. However there exist other kinds of devices that may legitimately report 0 battery levels. Fix this by filtering out 0-level reports only for digitizer usages, and continue reporting them for other kinds of devices (Smart Batteries, etc). Reported-by: 卢国宏 <luguohong@xiaomi.com> Fixes: 581c4484769e ("HID: input: map digitizer battery usage") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
Commit 581c4484769e ("HID: input: map digitizer battery usage") added
handling of battery events for digitizers (typically for batteries
presented in stylii). Digitizers typically report correct battery levels
only when stylus is actively touching the surface, and in other cases
they may report battery level of 0. To avoid confusing consumers of the
battery information the code was added to filer out reports with 0
battery levels.

However there exist other kinds of devices that may legitimately report
0 battery levels. Fix this by filtering out 0-level reports only for
digitizer usages, and continue reporting them for other kinds of devices
(Smart Batteries, etc).

Reported-by: 卢国宏 <luguohong@xiaomi.com>
Fixes: 581c4484769e ("HID: input: map digitizer battery usage")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable" 2025-10-14T10:56:28+00:00 Colin Ian King colin.i.king@gmail.com 2025-09-28T21:01:18+00:00 a7cdc2086c19e435d4cec3f9393b5f46899c0468 There is a spelling mistake in HID description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
There is a spelling mistake in HID description. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC 2025-10-14T10:08:38+00:00 Jonathan Denose jdenose@google.com 2025-10-13T20:54:57+00:00 083a4f3f3cc7d107728c8f297e4f6276f0876b2d Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until we implement a permanent solution. Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing the following build errors: MODPOST Module.symvers ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined! ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined! make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1 when the kernel is compiled with the following configuration: CONFIG_HID=y CONFIG_HID_MULTITOUCH=m CONFIG_HID_HAPTIC=m To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC to be tristate. For a more detailed discussion, see [1]. [1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/ Signed-off-by: Jonathan Denose <jdenose@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.

Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:

  MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1

when the kernel is compiled with the following configuration:

CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m

To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.

For a more detailed discussion, see [1].

[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/

Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: nintendo: Rate limit IMU compensation message 2025-10-14T09:57:40+00:00 Vicki Pfau vi@endrift.com 2025-10-07T01:05:33+00:00 b8874720b2f33a06ff1d4cf3827e7ec1195cb360 Some controllers are very bad at updating the IMU, leading to these messages spamming the syslog. Rate-limiting them helps with this a bit. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
Some controllers are very bad at updating the IMU, leading to these
messages spamming the syslog. Rate-limiting them helps with this a bit.

Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: nintendo: Wait longer for initial probe 2025-10-14T09:57:40+00:00 Vicki Pfau vi@endrift.com 2025-10-07T01:05:32+00:00 b73bc6a51f0c0066912c7e181acee41091c70fe6 Some third-party controllers, such as the PB Tails CHOC, won't always respond quickly on startup. Since this packet is needed for probe, and only once during probe, let's just wait an extra second, which makes connecting consistent. Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
Some third-party controllers, such as the PB Tails CHOC, won't always
respond quickly on startup. Since this packet is needed for probe, and only
once during probe, let's just wait an extra second, which makes connecting
consistent.

Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel 2025-10-14T09:49:09+00:00 Oleg Makarenko oleg@makarenk.ooo 2025-09-29T15:46:11+00:00 1141ed52348d3df82d3fd2316128b3fc6203a68c This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick. This device reboots itself every 8-10 seconds if it is not polled. Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo> Signed-off-by: Jiri Kosina <jkosina@suse.com> 
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.

Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>