linux.git/drivers/hid, branch v4.7-rc2

Merge branch 'for-4.7/wacom' into for-linus

2016-05-17T10:42:27+00:00

Merge branch 'for-4.7/upstream' into for-linus

2016-05-17T10:41:22+00:00

Conflicts:
	drivers/hid/usbhid/hid-quirks.c

Merge branches 'for-4.6/upstream-fixes', 'for-4.7/asus', 'for-4.7/hidraw' and 'for-4.7/thingm' into for-linus

2016-05-17T10:38:03+00:00

HID: wacom: add missed stylus_in_proximity line back

2016-05-03T10:03:44+00:00

Commit 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type") by accident
removed stylus_in_proximity flag for Intuos series while shuffling the code
around.

Fix that by reintroducing that flag setting in wacom_intuos_inout(), where
it originally was.

Fixes: 7e12978 ("HID: wacom: break out wacom_intuos_get_tool_type")
Signed-off-by: Ping Cheng 
Signed-off-by: Jiri Kosina

HID: wacom: Add fuzz factor to distance and tilt axes

2016-05-03T09:55:05+00:00

The fuzz present on the distance and tilt axes is noticable when a puck is
present, and userspace (specifically libinput) would like the ability to
filter out the noise. To facilitate this, we assign a fuzz value of '1'
for the distance and tilt axes. This is large enough to cover most of the
natural variation in distance value as the puck is moved around, and
enough to cover the jitter in rotation (reported through tilt axes) when
the puck is left alone.

Signed-off-by: Jason Gerecke 
Signed-off-by: Jiri Kosina

HID: usbhid: quirks for Corsair RGB keyboard & mice (K70R, K95RGB, M65RGB, K70RGB, K65RGB)

2016-04-27T09:21:29+00:00

These devices feature multiple interfaces/endpoints: a legacy BIOS/boot
interface (endpoint 0x81), as well as 2 corsair-specific keyboard interfaces
(endpoint 0x82, 0x83 IN/0x03 OUT) and an RGB LED control interface (endpoint
0x84 IN/0x04 OUT)

Because the extra 3 interfaces are not of subclass USB_INTERFACE_SUBCLASS_BOOT,
HID_QUIRK_NOGET is not automatically set on them and a 10s timeout per-endpoint
(30s per device) occurs initialising reports on boot.  We configure
HID_QUIRK_NO_INIT_REPORTS for these devices.

Additionally the left-side G1-G18 macro keys on the K95RGB generate output on
the un-opened 0x82/0x83 endpoints which causes the keyboard to stop responding
waiting for this event to be collected.  We enable HID_QUIRK_ALWAYS_POLL to
prevent this situation from occurring.

Signed-off-by: Trent Lloyd 
Tested-by: SUGNIAUX Wilfried 
Signed-off-by: Jiri Kosina

HID: Fix boot delay for Creative SB Omni Surround 5.1 with quirk

2016-04-25T14:23:26+00:00

Needed for v2 of the device firmware, otherwise kernel will stuck for few
seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot.

Signed-off-by: Nazar Mokrynskyi 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: thingm: remove not needed error message

2016-04-25T09:30:57+00:00

LED core takes care of handling failed calls to thingm_let_set.
- print error message in set_brightness_delayed or
- pass error to caller in led_set_brightness_sync
Also the error message here doesn't provide any hint what actually
went wrong. Therefore remove it.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: thingm: set new flag LED_HW_PLUGGABLE

2016-04-18T11:01:38+00:00

Use recently introduced flag LED_HW_PLUGGABLE to avoid warnings when
the device is unplugged.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: thingm: factor out duplicated code to thingm_init_led

2016-04-18T11:01:38+00:00

Simplify thingm_init_rgb by factoring out duplicated code
to thingm_init_led.

Signed-off-by: Heiner Kallweit 
Reviewed-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina