linux.git/drivers/hid, branch v4.2-rc3

Merge branches 'for-4.2/i2c-hid', 'for-4.2/lenovo', 'for-4.2/plantronics', 'for-4.2/rmi', 'for-4.2/sensor-hub', 'for-4.2/sjoy', 'for-4.2/sony' and 'for-4.2/wacom' into for-linus

2015-06-22T14:23:43+00:00

Conflicts:
	drivers/hid/wacom_wac.c

Merge branches 'for-4.1/upstream-fixes', 'for-4.2/upstream' and 'for-4.2/logitech' into for-linus

2015-06-22T14:22:06+00:00

Conflicts:
	drivers/hid/hid-logitech-hidpp.c

HID: cypress: use swap() in cp_report_fixup()

2015-06-18T09:00:42+00:00

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick 
Signed-off-by: Jiri Kosina

HID: microsoft: Add Surface Power Cover

2015-06-18T08:56:16+00:00

Adding support for the Microsoft Surface Pro Power Cover.

Signed-off-by: Raimund Roth 
Signed-off-by: Jiri Kosina

HID: hid-sony: Fix report descriptor for Navigation Controller

2015-06-18T08:45:58+00:00

Patch report descriptor to remove unused and ramdomly changing axis.

Original report descriptor (via BT) was as follows:
00000000  05 01 09 04 a1 01 a1 02  85 01 75 08 95 01 15 00  |..........u.....|
00000010  26 ff 00 81 03 75 01 95  13 15 00 25 01 35 00 45  |&....u.....%.5.E|
00000020  01 05 09 19 01 29 13 81  02 75 01 95 0d 06 00 ff  |.....)...u......|
00000030  81 03 15 00 26 ff 00 05  01 09 01 a1 00 75 08 95  |....&........u..|
00000040  04 35 00 46 ff 00 09 30  09 31 09 32 09 35 81 02  |.5.F...0.1.2.5..|
00000050  c0 05 01 75 08 95 27 09  01 81 02 75 08 95 30 09  |...u..'....u..0.|
00000060  01 91 02 75 08 95 30 09  01 b1 02 c0 a1 02 85 02  |...u..0.........|
00000070  75 08 95 30 09 01 b1 02  c0 a1 02 85 ee 75 08 95  |u..0.........u..|
00000080  30 09 01 b1 02 c0 a1 02  85 ef 75 08 95 30 09 01  |0.........u..0..|
00000090  b1 02 c0 c0 00                                    |.....|
00000095

Signed-off-by: Simon Wood 
Signed-off-by: Jiri Kosina

HID: hid-sony: Navigation controller only has 1 LED and no rumble

2015-06-18T08:45:57+00:00

Signed-off-by: Simon Wood 
Signed-off-by: Jiri Kosina

HID: hid-sony: Add BT support for Navigation Controller

2015-06-18T08:45:57+00:00

Signed-off-by: Simon Wood 
Signed-off-by: Jiri Kosina

HID: wacom: Introduce new 'touch_input' device

2015-06-18T08:42:40+00:00

Instead of having a single 'input_dev' device that will take either pen
or touch data depending on the type of the device, create seperate devices
devices for each. By splitting things like this, we can support devices
(e.g. the I2C "AES" sensors in some newer tablet PCs) that send both pen
and touch reports from a single endpoint.

Signed-off-by: Jason Gerecke 
Signed-off-by: Jiri Kosina

HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites'

2015-06-18T08:42:39+00:00

This splits the 'wacom_setup_pentouch_input_capabilites' function into
pieces dedicated to doing setup for just the pen interface and just
the touch interface. This makes it easier to focus on the relevant
piece when making changes.

This patch introduces no functional changes.

Signed-off-by: Jason Gerecke 
Signed-off-by: Jiri Kosina

HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type

2015-06-18T08:42:39+00:00

Historically, both the touch and pad tools would have shared the
'BTN_TOOL_FINGER' type. Any time you needed to distinguish the two, you
had to use some other bit of knowledge (e.g. that the pad was on the same
interface as the pen, and thus 'touch_max' would be zero).

To make these checks more readable, we introduce WACOM_DEVICETYPE_PAD.
Although we still have to rely on other bits of knowledge to set this
bit on the right interface (since it cannot be detected from the HID
descriptor), it can be done just once inside 'wacom_setup_device_quirks'.

This patch introduces no functional changes.

Signed-off-by: Jason Gerecke 
Signed-off-by: Jiri Kosina