Pull input updates from Dmitry Torokhov: "First round of updates for the input subsystem. You will get a new touchsreen driver for Cypress 4th generation devices, a driver for a special controller implementing PS/2 protocol in OLPC devices, and a driver for power key for SiRFprimaII PWRC. HID and bcm5497 now support for the 2013 MacBook Air. EVIOCGKEY and the rest of evdev ioctls now flush events of matching type from the client's event queue so that clients can be sure any events received after issuing EVIOCG* ioctl are new events. And a host of cleanups and improvements in other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits) Input: cyttsp4 - kfree xfer_buf on error path in probe() Input: tps6507x-ts - select INPUT_POLLDEV Input: bcm5974 - add support for the 2013 MacBook Air HID: apple: Add support for the 2013 Macbook Air Input: cyttsp4 - leak on error path in probe() Input: cyttsp4 - silence NULL dereference warning Input: cyttsp4 - silence shift wrap warning Input: tps6507x-ts - convert to polled input device infrastructure ARM: davinci: da850-evm: remove vref from touchscreen platform data Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices Input: cyttsp - I2C driver split into two modules Input: add OLPC AP-SP driver Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe() Input: tps6507x-ts - remove vref from platform data Input: tps6507x-ts - use bool for booleans Input: tps6507x-ts - remove bogus unreachable code Input: samsung-keypad - let device core setup the default pin configuration Input: wacom_i2c - implement hovering capability ...
Intuos4 WL is separately reporting power supply and battery charging status - now hid-wacom is using that information. Previously hid-wacom was wrongly treating "battery charging" bit as "power supply connected". Now it should report battery charging, battery discharging, battery full and power supply status. Intuos4 WL sends reports when is in use (obvious) and when unplugging power supply. If means that if the device is being charged, but it's not being used it will never report "battery full". The same problem happens after the device has been connected, but it's not in use - the battery/ac status will be incorrect. Currently there is no mechanism to ask the device to send a report containing battery/ac status. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Conflicts: drivers/hid/hid-core.c
The current i2c hid driver does not support sending HID output reports using the output register for devices which support receiving reports through this method. This patch determines which method to use to send output reports based on the value of wMaxOutputLength in the device's HID descriptor. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Genius Gila Gaming Mouse presents an obviously wrong report descriptor. the Consumer control (report ID 3) is the following: 0x05, 0x0c, // Usage Page (Consumer Devices) 105 0x09, 0x01, // Usage (Consumer Control) 107 0xa1, 0x01, // Collection (Application) 109 0x85, 0x03, // Report ID (3) 111 0x19, 0x00, // Usage Minimum (0) 113 0x2a, 0xff, 0x7f, // Usage Maximum (32767) 115 0x15, 0x00, // Logical Minimum (0) 118 0x26, 0xff, 0x7f, // Logical Maximum (32767) 120 0x75, 0x10, // Report Size (16) 123 0x95, 0x03, // Report Count (3) 125 0x81, 0x00, // Input (Data,Arr,Abs) 127 0x75, 0x08, // Report Size (8) 129 0x95, 0x01, // Report Count (1) 131 0x81, 0x01, // Input (Cnst,Arr,Abs) 133 0xc0, // End Collection 135 So the first input whithin this report has a count of 3 but a usage range of 32768. So this value is obviously wrong as it should not be greater than the report count. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=959721 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This patch adds keyboard support for MacbookAir6,2 as WELLSPRING8 (0x0291, 0x0292, 0x0293). The touchpad is handled in a separate bcm5974 patch, as usual. Cc: stable@vger.kernel.org Reported-and-tested-by: Brad Ford <plymouthffl@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Wii U Pro Controller is a new Nintendo remote device that looks very similar to the XBox controller. It has nearly the same features and uses the same protocol as the Wii Remote. We add a new wiimote extension device so the Pro Controller is properly detected and supported. The device reports MP support, which is odd and I couldn't get it working, yet. Hence, we disable MP registers for now. Further investigation is needed to see what extra capabilities are provided. There are some other unknown bits in the extension reports that I couldn't figure out what they do. You can use hidraw to access these if you're interested. We might want to hook up the "charging" and "USB" bits to the battery device so user-space can query whether it is currently charged via USB. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Extend the comment explaining the condition for discarding out-of-range values to clarify the cases in which devices don't provide any logical min/max. Signed-off-by: Jiri Kosina <jkosina@suse.cz>