Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device. The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX. Signed-off-by: Aoba K <nexp_0x17@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Through the usage of pm_ptr() the CONFIG_PM-dependent code will always be compiled, protecting against bitrot. The linker will then garbage-collect the unused function avoiding any overhead. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20231012-hid-pm_ptr-v1-3-0a71531ca93b@weissschuh.net Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Register the Synaptics device as a special multitouch device with certain quirks that may improve usability of the touchpad device. Reported-by: Rain <rain@sunshowers.io> Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/ Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.
Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string.
Reported-by: Maxime Ripard <mripard@kernel.org>
Closes: https://lore.kernel.org/linux-input/ZOZIZCND+L0P1wJc@penguin/T/#m443f3dce92520f74b6cf6ffa8653f9c92643d4ae
Fixes: c08d46aa805b ("HID: multitouch: devm conversion")
Suggested-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230824061308.222021-3-sergeantsagara@protonmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Certain touchscreen devices, such as the ELAN9034, are oriented incorrectly and report touches on opposite points on the X and Y axes. For example, a 100x200 screen touched at (10,20) would report (90, 180) and vice versa. This is fixed by adding device quirks to transform the touch points into the correct spaces, from X -> MAX(X) - X, and Y -> MAX(Y) - Y. Signed-off-by: Allen Ballway <ballway@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The HID descriptor of this device contains two mouse collections, one
for mouse emulation and the other for the trackpoint.
Both collections get merged and, because the first one defines X and Y,
the movemenent events reported by the trackpoint collection are
ignored.
Set the MT_CLS_WIN_8_FORCE_MULTI_INPUT class for this device to be able
to receive its reports.
This fix is similar to/based on commit 40d5bb87377a ("HID: multitouch:
enable multi-input as a quirk for some devices").
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/825
Reported-by: Akito <the@akito.ooo>
Tested-by: Akito <the@akito.ooo>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes: 9609827458c3 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
The trackpad of the given device sends continuous report of pointers status as per wxn8 spec. However, the spec did not clarify when the fingers are lifted so fast that between the interval of two report frames fingers on pad reduced from >=2 to 0. The second last report contains >=2 fingers with tip state 1 and the last report contains only 1 finger with tip state 0. Although this can happen unfrequently, a quick fix will be improve the consistency to 100%. A quick fix is to disable MT_QUIRK_ALWAYS_VALID and enable MT_QUIRK_NOT_SEEN_MEANS_UP. Test for hid-tools is added in [1] In addition to this, I2C device 04CA:00B1 may also need similar class but with MT_QUIRK_FORCE_MULTI_INPUT disabled (but it does not harm to enable it on non-multi-input device either). The respective owner has been notified and a patch may coming soon after test. [1]: https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/130 Signed-off-by: Tao Jin <tao-j@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Google Whiskers touchpad does not work properly with the default multitouch configuration. Instead, use the same configuration as Google Rose. Signed-off-by: Marek Maslanka <mm@semihalf.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This applies the similar quirks used by previous generation devices such as X1 tablet for X12 tablet, so that the trackpoint and buttons can work. This patch was applied and tested working on 5.17.1 . Cc: stable@vger.kernel.org # 5.8+ given that it relies on 40d5bb87377a Signed-off-by: Tao Jin <tao-j@outlook.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/CO6PR03MB6241CB276FCDC7F4CEDC34F6E1E29@CO6PR03MB6241.namprd03.prod.outlook.com