The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.

Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.

Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.

Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.

Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.

[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

By default the track point does not work on the Asus Expertbook B2402FVA.

From libinput record i got the ID of the track point device:
  evdev:
    # Name: ASUE1201:00 04F3:32AE
    # ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100

I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.

Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

- Constification of report descriptors so drivers can use read-only
  memory when declaring report descriptors fixups (Thomas Weißschuh)

This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works.  New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.

Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The patch is to add proper quirks for sis multitouch format

Signed-off-by: tammy tseng <tammy0524@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

The 2024 Lenovo Y9000P which use GT7868Q chip also needs a fixup.
The information of the chip is as follows:
I2C HID v1.00 Mouse [GXTP5100:00 27C6:01E0]

Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

By allowing the drivers to return a "const *" they can constify their
static report arrays.
This makes it clear to driver authors that the HID core will not modify
those reports and they can be reused for multiple devices.
Furthermore security is slightly improved as those reports are protected
against accidental or malicious modifications.

[bentiss: fixup hid-cougar.c and hid-multitouch.c for latest version of
the master branch]

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240803-hid-const-fixup-v2-6-f53d7a7b29d8@weissschuh.net
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>

GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.

Signed-off-by: Dmitry Savin <envelsavinds@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.

MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.

Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>