linux.git/drivers/hid/hid-input.c, branch v2.6.21

HID: fix Logitech DiNovo Edge touchwheel and Logic3 /SpectraVideo middle button

2007-03-01T08:54:44+00:00

Dongle shipped with Logitech DiNovo Edge (0x046d/0xc714) behaves in a weird
non-standard way - it contains multiple reports with the same usage, which
results in remapping of GenericDesktop.X and GenericDesktop.Y usages to
GenericDesktop.Z and GenericDesktop.RX respectively, thus rendering the
touchwheel unusable.

The commit 35068976916fdef82d6e69ef1f8c9a1c47732759 solved this
in a way that it didn't remap certain usages. This however breaks
(at least) middle button of Logic3 / SpectraVideo (0x1267/0x0210),
which in contrary requires the remapping.

To make both of the harware work, allow remapping of these usages again,
and introduce a quirk for Logitech DiNovo Edge "touchwheel" instead - we
disable remapping for key, abs and rel events only for this hardware.

Signed-off-by: Jiri Kosina

HID: fix broken Logitech S510 keyboard report descriptor; make extra keys work

2007-03-01T08:52:45+00:00

This patch makes extra keys (F1-F12 in special mode, zooming, rotate, shuffle)
on Logitech S510 keyboard work.

Logitech S510 keyboard sends in report no. 3 keys which are far above the
logical maximum described in descriptor for given report.

This patch introduces a HID quirk for this wireless USB receiver/keyboard
in order to fix the report descriptor before it's being parsed - the logical
maximum and the number of usages is bumped up to 0x104d). The values are in the
"Reserved" area of consumer HUT, so HID_MAX_USAGE had to be changed too.

In addition to proper extracting of  the values from report descriptor, proper
HID-input mapping is introduced for them.

Signed-off-by: Jiri Kosina

HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG

2007-02-05T09:00:45+00:00

CONFIG_INPUT_DEBUG is non-existent option, so remove anything depending
on it.

Also, as we have new CONFIG_HID_DEBUG, this should be used on places
where ifdef DEBUG was used before.

Suggested by Adrian Bunk.

Signed-off-by: Jiri Kosina

HID: API - fix leftovers of hidinput API in USB HID

2007-02-05T09:00:40+00:00

hidinput_{open,close}() functions do not belong to usbhid, but
to the generic HID layer. Move them, and fix hooks in struct
hid_device, so that now the callbacks are done to transport-specific
_open() functions, but not input_open() functions.

Signed-off-by: Jiri Kosina

HID: hid debug from hid-debug.h to hid layer

2007-02-05T09:00:38+00:00

hid-debug.h contains a lot of code, and should not therefore
be a header.

This patch moves the code to generic hid layer as .c source, and
introduces CONFIG_HID_DEBUG to conditionally compile it, instead
of playing with #define DEBUG and including hid-debug.h.

Signed-off-by: Jiri Kosina

hid: quirk for multi-input devices with unneeded output reports

2007-02-05T09:00:04+00:00

Add new quirk HID_QUIRK_SKIP_OUTPUT_REPORTS to skip output reports
when enumerating reports on a hid-input device. Add this quirk and
HID_QUIRK_MULTI_INPUT to 0810:0001.

PantherLord Twin USB Joystick, 0810:0001 has separate input reports
for 2 distinct game controllers in the same interface, so it needs
HID_QUIRK_MULTI_INPUT. However, the device also contains one output
report per controller which is used to control the force feedback
function, and we do not want those to appear as separate input
devices as well. The simplest approach seems to be to add a quirk to
skip output reports on 0810:0001, and allow the force feedback
driver to handle those.

Signed-off-by: Anssi Hannula 
Signed-off-by: Jiri Kosina

HID: fix pb_fnmode and move it to generic HID

2007-01-30T14:05:27+00:00

The apple powerbook people are used to switch the pb_fnmode
setting at runtime through writing to sysfs, altering the
module parameter value. This was broken for them in 2.6.20-rc1
when generic HID layer was introduced, as the pb_fnmode flag
was made per-hiddevice, instead of global variable.

This patch moves the pb_fnmode module parameter from usbhid module
to hid module, but apart from that retains backward compatibility
with respect to changing the mode through sysfs.

Signed-off-by: Jiri Kosina

HID: fix hid-input mapping for Firefly Mini Remote Control

2007-01-25T17:31:25+00:00

Patch adds entries to the HID consumer page for the Firefly
Mini IR remote control

Signed-off-by: Simon Bennett 
Signed-off-by: Jiri Kosina

HID: hid/hid-input.c doesn't need to include linux/usb/input.h

2007-01-21T21:17:57+00:00

There is no reason for generic hid-input.c to include usb-specific
input.h.

As a sideeffect, this also fixes warning of redefinition of dbg()
macro, when hid-input.c is compiled with DEBUG (as there is a clash
between dbg() from hid.h and usb/input.h).

Signed-off-by: Jiri Kosina

HID: proper LED-mapping for SpaceNavigator

2007-01-21T21:17:53+00:00

This change introduces a mapping for LED indicators between the HID
specification and the Linux input subsystem. The previous code properly
mapped the LEDs relevant for Keyboards, but garbeled the remaining ones.
With this change all LED enums from the input system get mapped to more
or less equivalent LED numbers from the HID specification.

This patch also ensures that the unused bits in a HID report to the
device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully
usable with the linux input system.

Signed-off-by: Simon Budig 
Signed-off-by: Jiri Kosina