linux.git/drivers/hid/hid-core.c, branch v3.15

HID: core: fix computation of the report size

2014-05-05T13:54:40+00:00

The extra seven bits are only required when allocating the report buffer.
We can not use those extra bytes for the length of the report in the
generic implementation of .request because the device might (will) refuse
the set_report command.
This has been verified on the Atmel touchpad found on the Samsung Ativ 9
plus, which uses hid-multitouch and HID over I2C. Without this fix, the
device refuses to switch to the multitouch mode, and it becomes unresponsive
from the user point of view.

Actually, this has been discussed during the initial submission of the
commit 4fa5a7f76cc7b6ac87f57741edd2b124851d119f, see
https://patchwork.kernel.org/patch/3621751/

Unfortunately, I completely forgot about it later.

Reported-by: Matthias Bayer 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: core: do not scan constant input report

2014-04-07T07:55:25+00:00

The Microsoft Surface Type/Touch Cover 2 is a fancy device which advertised
itself as a multitouch device but with constant input reports.
This way, hid_scan_report() gives the group MULTITOUCH to it, but
hid-multitouch can not handle it due to the constant collection ignored
by hid-input.

To prevent such crap in the future, and while we do not fix this particular
device, make the scan_report coherent with hid-input.c, and ignore constant
input reports.

CC: stable@vger.kernel.org # 3.12+
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

Revert "HID: microsoft: Add ID's for Surface Type/Touch Cover 2"

2014-04-07T07:54:43+00:00

This reverts commit 117309c51dca42121f70cacec801511b76acf75c.

The MS Surface Pro 2 has an USB composite device with 3 interfaces
- interface 0 - sensor hub
- interface 1 - wacom digitizer
- interface 2 - the keyboard cover, if one is attached
This USB composite device changes it product id dependent on if and which
keyboard cover is attached. Adding the covers to hid_have_special_driver
prevents loading the right hid drivers for the other two interfaces, all 3
get loaded with hid-microsoft. We don't even need hid-microsoft for the
keyboards. We have to revert this to load the right hid modules for each
interface.

CC: stable@vger.kernel.org # kernel 3.14 only
Signed-off-by: Derya 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2014-04-02T23:24:28+00:00

Pull HID updates from Jiri Kosina:
 - substantial cleanup of the generic and transport layers, in the
   direction of an ultimate goal of making struct hid_device completely
   transport independent, by Benjamin Tissoires
 - cp2112 driver from David Barksdale
 - a lot of fixes and new hardware support (Dualshock 4) to hid-sony
   driver, by Frank Praznik
 - support for Win 8.1 multitouch protocol by Andrew Duggan
 - other smaller fixes / device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits)
  HID: sony: fix force feedback mismerge
  HID: sony: Set the quriks flag for Bluetooth controllers
  HID: sony: Fix Sixaxis cable state detection
  HID: uhid: Add UHID_CREATE2 + UHID_INPUT2
  HID: hyperv: fix _raw_request() prototype
  HID: hyperv: Implement a stub raw_request() entry point
  HID: hid-sensor-hub: fix sleeping function called from invalid context
  HID: multitouch: add support for Win 8.1 multitouch touchpads
  HID: remove hid_output_raw_report transport implementations
  HID: sony: do not rely on hid_output_raw_report
  HID: cp2112: remove the last hid_output_raw_report() call
  HID: cp2112: remove various hid_out_raw_report calls
  HID: multitouch: add support of other generic collections in hid-mt
  HID: multitouch: remove pen special handling
  HID: multitouch: remove registered devices with default behavior
  HID: hidp: Add a comment that some devices depend on the current behavior of uniq
  HID: sony: Prevent duplicate controller connections.
  HID: sony: Perform a boundry check on the sixaxis battery level index.
  HID: sony: Fix work queue issues
  HID: sony: Fix multi-line comment styling
  ...

Merge branch 'for-3.15/microsoft' into for-linus

2014-04-01T17:06:41+00:00

Conflicts:
	drivers/hid/hid-core.c

Merge branch 'for-3.15/hid-core-ll-transport-cleanup' into for-linus

2014-04-01T17:05:09+00:00

Conflicts:
	drivers/hid/hid-ids.h
	drivers/hid/hid-sony.c
	drivers/hid/i2c-hid/i2c-hid.c

Merge branch 'for-3.15/hid-cp2112' into for-3.15/hid-core-ll-transport-cleanup

2014-03-14T14:27:36+00:00

Merge 3.14-rc4 into usb-next

2014-02-24T23:59:22+00:00

We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman

HID: make .raw_request mandatory

2014-02-24T16:23:15+00:00

SET_REPORT and GET_REPORT are mandatory in the HID specification.
Make the corresponding API in hid-core mandatory too, which removes the
need to test against it in some various places.

Signed-off-by: Benjamin Tissoires 
Reviewed-by: David Herrmann 
Signed-off-by: Jiri Kosina

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2014-02-19T00:29:46+00:00

Pull HID update from Jiri Kosina:

 - fixes for several bugs in incorrect allocations of buffers by David
   Herrmann and Benjamin Tissoires.

 - support for a few new device IDs by Archana Patni, Benjamin
   Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hyperv: make sure input buffer is big enough
  HID: Bluetooth: hidp: make sure input buffers are big enough
  HID: hid-sensor-hub: quirk for STM Sensor hub
  HID: apple: add Apple wireless keyboard 2011 JIS model support
  HID: fix buffer allocations
  HID: multitouch: add FocalTech FTxxxx support
  HID: microsoft: Add ID's for Surface Type/Touch Cover 2
  HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay