linux.git/drivers/hid/Kconfig, branch v3.10

Merge branches 'for-3.10/multitouch', 'for-3.10/roccat' and 'for-3.10/upstream' into for-linus

2013-04-30T08:19:07+00:00

Conflicts:
	drivers/hid/Kconfig

Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', 'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus

2013-04-30T08:12:44+00:00

HID: clarify Magic Mouse Kconfig description

2013-04-20T23:17:26+00:00

The Magic Mouse driver also supports the Magic Trackpad, so mention it
in the KConfig description for the driver.

Signed-off-by: David King 
Signed-off-by: Jiri Kosina

HID: appleir: add support for Apple ir devices

2013-04-19T02:06:20+00:00

This driver was originally written by James McKenzie, updated by
Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend
support added.
I ported it to the HID subsystem, in order to simplify it a litle
and allow lirc to use it through hiddev.

More recent versions of the IR receiver are also supported through
a patch by Alex Karpenko. The patch also adds support for the 2nd
and 5th generation of the controller, and the menu key on newer
brushed metal remotes.

Tested-by: Fabien André 
Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: holtek: Holtek devices depends on USB_HID

2013-03-07T14:27:29+00:00

In the HID drivers tranport cleanup series, I removed the dependency
between hid-holtek and usbhid. This was wrong as hid-holtek.c relies
extensively on usb calls.

This fixes compilation error when CONFIG_USB_SUPPORT is not enabled.

Signed-off-by: Benjamin Tissoires 
Signed-off-by: Jiri Kosina

HID: Kconfig: fix "-- help---"

2013-03-05T09:16:45+00:00

Signed-off-by: Paul Bolle 
Signed-off-by: Jiri Kosina

HID: use hid_hw_wait() instead of direct call to usbhid

2013-02-25T12:26:41+00:00

This removes most of the dependencies between hid drivers and usbhid.

The patch was constructed by replacing all occurences of
usbhid_wait_io() by its hid_hw_wait() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.

As of today, few drivers are still requiring an explicit USB layer
dependency:
* ntrig (a patch is on its way)
* multitouch (one patch following and another on its way)
* lenovo tpkbd
* roccat
* sony

The last three are two deeply using direct calls to the usb subsystem
to be able to be cleaned right now.

Signed-off-by: Benjamin Tissoires 
Reviewed-by: Mika Westerberg 
Signed-off-by: Jiri Kosina

HID: use hid_hw_request() instead of direct call to usbhid

2013-02-25T12:26:41+00:00

This allows the hid drivers to be independent from the transport layer.

The patch was constructed by replacing all occurences of
usbhid_submit_report() by its hid_hw_request() counterpart.
Then, drivers not requiring USB_HID anymore have their USB_HID
dependency cleaned in the Kconfig file.

Finally, few drivers still depends on USB_HID. Many of them
are requiring the io wait callback. They are found in the next patch.

Signed-off-by: Benjamin Tissoires 
Reviewed-by: Mika Westerberg 

For the sensor-hub part:
Tested-by: Mika Westerberg 
Signed-off-by: Jiri Kosina

HID: Kconfig: Remove explicit transport layer dependencies

2013-02-25T12:26:40+00:00

Most HID drivers (rightfully) only depend on the HID bus, not the
specific transport layer. Remove such dependencies where applicable.

Signed-off-by: Benjamin Tissoires 
Acked-by: Henrik Rydberg 
Reviewed-by: Mika Westerberg 
Signed-off-by: Jiri Kosina

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

2013-02-22T01:41:38+00:00

Pull HID subsystem updates from Jiri Kosina:
 "HID subsystem and drivers update. Highlights:

   - new support of a group of Win7/Win8 multitouch devices, from
     Benjamin Tissoires

   - fix for compat interface brokenness in uhid, from Dmitry Torokhov

   - conversion of drivers to use hid_driver helper, by H Hartley
     Sweeten

   - HID over I2C transport received ACPI enumeration support, written
     by Mika Westerberg

   - there is an ongoing effort to make HID sensor hubs independent of
     USB transport.  The first self-contained part of this work is
     provided here, done by Mika Westerberg

   - a few smaller fixes here and there, support for a couple new
     devices added"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits)
  HID: Correct Logitech order in hid-ids.h
  HID: LG4FF: Remove unnecessary deadzone code
  HID: LG: Prevent the Logitech Gaming Wheels deadzone
  HID: LG: Fix detection of Logitech Speed Force Wireless (WiiWheel)
  HID: LG: Add support for Logitech Momo Force (Red) Wheel
  HID: hidraw: print message when succesfully initialized
  HID: logitech: split accel, brake for Driving Force wheel
  HID: logitech: add report descriptor for Driving Force wheel
  HID: add ThingM blink(1) USB RGB LED support
  HID: uhid: make creating devices work on 64/32 systems
  HID: wiimote: fix nunchuck button parser
  HID: blacklist Velleman data acquisition boards
  HID: sensor-hub: don't limit the driver only to USB bus
  HID: sensor-hub: get rid of unused sensor_hub_grabbed_usages[] table
  HID: extend autodetect to handle I2C sensors as well
  HID: ntrig: use input_configured() callback to set the name
  HID: multitouch: do not use pointers towards hid-core
  HID: add missing GENERIC_HARDIRQ dependency
  HID: multitouch: make MT_CLS_ALWAYS_TRUE the new default class
  HID: multitouch: fix protocol for Elo panels
  ...